Audition

Hello!! I am using Audition 2023, and for some reason some of my tools are greyed out?? I need to use the lasso tool, however I cannot get it to work for whatever reason. If anyone knows how to fix this, let me know!! Heres a screenshot if that helps in any way 🙂

Hi, Conversation of 2 persons recorded in one file. One person is louder, the other quieter. How to equalize it so that each of them is the same sound level?What tools should I use? I used Match Loudness with these settings, but the effect is as shown in the screenshot:  Thanks for the feedbackG

Hi guys,   I have an issue that is driving me crazy. I am successfully mixing music project that are limited with a brick wall limiter to 0db peak. Each time I export my file, I get a -3db peak output ave file, why. Strangly, upon importing to a new empty multitrack, with fafer and master fader set to 0db, the track (soloed in attached image) peaks at 0db and the master fader shows a -3db peak. How and why is this happening?   

Hello Everyone!In Audition, is it possible to record my microphone and desktop audio at the same time?Any help is appreciated.

After I apply Slate Digital effects to my audio file (just voice), Audition gives me an Error Report and "needs to close." 100% of the time. Does anyone know what to do? I have the most recent Audition update, enough RAM, and current drivers.

I'm using Audition CC 2023 and suddenly I can no longer save files as .ulaw.  This conversion is REQUIRED by my clients and removing the option is unacceptable.  How can I fix this????

Is there a way to spread out lots of clips in a multitrack evenly across the timeline given a set distance between them  Thanks

Hello,in Waveform Editor in "Default" Workspace of Audition, there is an "Editor" panel with playback controls along the bottom side of the panel (Stop, Play, Pause, Record, Loop…).I use Editor panel in my own Workspace, but the controls are missing here. I am trying to find how to display them, but no succeess. Can you help, please? Thanks!

Bonjour,Je débute dans la narration de livre audio.Audition est le seul logiciel qui me convient et qui est assez intuitif.Sauf qu’au niveau de la qualité ce n’est pas encore ça. Je retrouve un bruit de fond que l’éditeur a aussi remarqué.J’ai du matériel professionnel et j’enregistre dans une salle de musique.Mon micro est paramétré correctement je pense.Quels sont les bons paramètres pour entendre juste le silence en fond sans que la voix soit déformée, sans que ça fasse robotique non plus.J’ai tenté via un tuto de suivre les modifications (bruit, égaliseur, limiteur etc etc) mais ça ne donne pas non plus le résultat voulu.Si quelqu’un peut m’aider.Merci beaucoup !Rose  

I was creating Audio programs. I've NEVER played around with multi-track files. I would simply click "New," then choose "Audio."I took a break, and when I came back and tried it again, I got the message "Multitrack session not open. Mixer controls are enabled only when a multitrack session is the active document."I closed all my files and restarted Audio a couple times, but the problem persists. I also double-clicked on an audio file I created earlier, but it didn't open. What do I have to do to create a simple audio file?Thanks.

I'm trying to create a radio sound effect where the volume of the static noise floor follows the peaking of the voice on the radio. Basicaly: when the voice is loud, the static should get louder. When the voice gets soft, the static gets quieter. Is there a way to automate this in Audition? Thanks so much!

When I record (from any mic), it looks like it's starting to record, but nothing shows up but a flat line. No sound. No waveform. I checked all my settings. The right mic is chosen. I checked my Privacy settings on my Mac. Audition has permission to use it. This was never a problem before. Don't know what else to do.

I'm hoping to listen to a 5.1 mix using passive monitors. I have optical cable running from my computer to a receiver. I can play 5.1 material, but not from Adobe Audition. I'm only given 2 channel mapping options. Does anyone have a work-around for this?

I'm running the latest version of audition and any time I try to add any effects, match loudness, or save, it takes a lot longer than it should. I have 32 gigs of ram and a 2tb SSD (Samsung t7). The file I'm trying to edit is just a simple single track .wav file. It's about 13 minutes long as well. When I go to apply the effects, it would take 2 hours. I opened it on another device with only 16 gigs of ram and it ran just fine as it should normally. Not sure what the issue is as I have all of the settings the same as well.

While every other Plug-In works perfectly (Ozone 10 Impact, Ozone EQ etc) when I try to load Ozone 10 Plug-In (Which includes all others) Audition crashes. It used to work ok, i installed some other Plug-Ins (Waves) and from that moment no Ozone 10. I uninstalled everything, reinstalled Audition and only Izotope Plug-Ins but nothing. Anyone having an idea?

I try to open an .mp3 file (that was recorded on an iPad with standard voice recorder app) in Audition. The mp3 works fine in Gmail preview.After trying to open the .mp3 I get this error:Error: Apple AudioToolbox cannot open the specified file. Error Code: 'dta?'How can I solve this and work with the .mp3 in Audition?Audition CC 11.0.2.2Mac OS 10.13.2MacBook Pro 13" Retina Mid 2014

In editor, now when I want to record a selected area, for example, when I want to record room tone over a selected area between spoken sentences, it stops short of the selected area.  It will record most of it, but not all the way to the end of the selection.

My boss is recording into audition through a Rodemaster Pro board. He records very frequently and usually the audio sounds fine, but once every 10ish recordings he gets audio that comes out like this. He's recording in 44100, 32 bit. Any suggestions? Thanks in advance. 

Hello,My PC is still running under Win 8.1-64bits. I would like to install a compatible version of Adobe Audition (maybe AA 11...?). How can I find it please ?Thanks Best regards Lionel

<< Part 3  ∥  Part 5 >>      This is a part of the ongoing Learn series with Mike Russell which will help you get started with Adobe Audition. We've some interesting articles & videos coming up weekly where we will talk about the tools, workflow & some really cool effects. Let us know how you use Audition & what you want to learn about Adobe Audition. We're here to help.         In this video, you will learn how to use different tools like Equalizers, Compressors and Normalizer in Audition to enhance the quality of your existing audio. 0:29 - ENCN: Equalize, Normalize, Compress, Normalize 0:46 - How to improve audio quality with an equalizer 1:06 - Setting up a high pass filter 1:22 - Notching and scanning through frequencies 2:23 - Improving vocal clarity by adding high end 2:42 - Normalizing your audio 2:50 - Using the Dynamics effect to add a compressor 3:33 - Final audio improvement with normalizatio