Audition

I am Having an Issue with My Mic not being able to record anything. I have looked through a bunch of turtorials explaining the same things about going to audio hardware and Audio channel mapping and setting up my Mic and with everything inputed in correctly I still can't record anything from my Mic.

Bit of a long shot but is anyone selling an older version of Audition they no longer need?  My PC isn't high enough spec to run the latest one.

Hi there, I have searched and can't find anything on this subject newer than 2019. We are relatively new to Audition, we are on our 4th podcast (we as in me and my son). We are on the latest version of Adobe Audition. We just spent hours, more than 15, editing a podcast and it was perfect. We added the intro and saved it and then poof. The file went corrupt. No error message, nothing. The intros and outros are perfectly fine and we tried the previous episode files and they all play perfectly. But all four audio files from the podcast portion have all gone corrupt. When played, it sounds like skipping and each individual file is playing at once even though the spectral view, in the beginning, looks fine. The entire middle section of all four files disappeared as well. We have no idea what happened. Again, no error messages when saving, nothing. We went into the backup files to try to recover and the same thing has happened to all of the backup files (backs up every 10 minutes). We are a

I have an interview that I recorded on Zoom.  The file has both me and the guest on separate tracks which is what I wanted.  However; how do I make sure that neither track moves out of place as I continue to edit?  

I just finished creating a mix at a level of -23LUFS. Both the digital loudness radar and my external meter confirm it is -23LUFS. However, after importing it in premiere and resolve, both NLE's tell me it is -26,8 LUFS. All of the separate audio tracks are linked to buses. Voice to voice bus, music to music bus etc. All of the three buses are connected to one final bus, which I placed the loudness radar on. I only exported the final bus. I can't seem to find any settings that might make the audio volume lower during export. Can someone tell me what is going on? I seem to have this a lot in the past as well when I export the master track, sometimes the audio is a bit lower than it should be. Is there any way to tell audition to export 'what you hear is what you get'?

I am using Audition 3. My workspace displays the waveform in 3 separate sections. On the left is the waveform of the first 10 seconds and on the right, the last 10 seconds and in the centre the entire waveform. I can't work with this workspace, how do I restore the conventional simple view of the waveform?I would be grateful for any advice you could give me.Here's a screenshot.

I have been starting a YouTube channel and going through the audio and video editing but sometimes when adding audio into audition and premiere elements my audio sounds really quiet but if I play the audio through windows Media player it sounds loud and clear. Any ideas why or what is going on?

I have used Audobe Audition for years, (and Cool Edit) before that.  I recently got a new computer and have re-installed Audition 1.5.  Now playback sounds clipped and buzzy.  I record "stereo mix" from the sound card.  Could I have some sort of an input / output cinfluct?  Thanks for any suggestions.

Hi ... this has been driving me mad for a while now. I edit my audio files and they have a name like:  loud_Bounce_1_Copy(2)_R. I save the file as MONKEY Chapter 2 which is what I want it to be viewed as. However in Quicktime (and other apps) it shows loud_Bounce_1_Copy(2)_R...  how do I overwrite this to always have my preferred title on the file? HELP ME !!!   

Hi,In Adobe Premiere Pro, it's possible to queue up videos for rendering and export. Is there any similar feature for multitrack sessions in Adobe Audition?I have 100+ multitrack sessions ranging from 20 minutes to an hour that I need to export, being able to queue and bulk export would save a lot of time, since each individual export takes 5-20 minutes and the time remaining estimate is rarely accurate, meaning I have to babysit it.Thanks!

When I open Adobe Audition 2017 I get the following error message: Audition's primary temp volume cannot be found. Please review Audition's disk cache preferences."  I go to the preferences and see an explanation point next to Primary Temp. I click browse and I am in the Document's folder in my Mac. From there I get lost.Can anyone give me advice on how to correct this problem?

Hello!I'm working on a multitrack session and would go into waveform to clean up/normalize audio for each individual track. I'm normalizing all waveforms to -6dB. However, when I go back to multitrack, all levels are at -9dB. This didn't use to happen before. Is there a fix for this so that multitrack levels are syncing/matching waveform levels? Thanks in advance!

When I select the track I want to fix and click scan nothing happened. My audio is heavily clipped. 

Hello,I just recently installed Audition, and for a few days I was playing with the time stretch function. But this morning it suddenly seems to have disappeared - all I see now under "Time and Pitch" are "Automatic Pitch Correction" and "Pitch Shifter", neither one of which allows me to play with time.Am I I missiing something? What happened to the "Stretch and Pitch" effect (if that's what it was called)?Thanks,

Uso adobe audition 2019 y al momento de mover un clip en el multipista mientras se está reproduciendo la sesión  el programa se bloquea y se cierra, cuando reinicio el programa no se guarda nada. Alguien sabe si es un problema de velocidad de reproducción? ¿tarjeta de video?. Muchas gracias. Saludos.

BonsoirComment fait-on pour avoir un clavier pour jouer dans le logiciel.J'ai un clavier maitre Alesis V25. Il est branché en USB car c'est le seul moyen et adobe audition ne le reconnais pas.Quelqu'un pourrait-il m'aider s'il vous plait ?Jean-Christophe

Hello. I am working on a video that has minor sounds in the background. The subject of the video when speaking accidentally slaps his knee and you can hear it. I tried to get rid of this with the heal tool from Adobe Audition but that just damages the dialogue. You can also hear what sounds like floor creeks from the room where the video was filmed in. It's not throughout the video just from time to time. Is there a way to get rid of this?Thanks

Después de utilizar PROCESAMIENTO POR LOTES, se modifican en todas las grabaciones el campo "GENERO" por la palabra "OTHER"... gran inconveniente!!! Gracias por la ayuda!

Hi all,I was hoping someone might be able to figure this out as I've tried many things so far.  When I record from Stereo Mix in audition's multitrack recording, the sound comes with static/distortion (See link: Audition CC Stereo Mix Static - YouTube).Here are some things I've tried to fix this:-Listen to this device is unchecked for stereo Mix-Disabled my onboard PC microphone-Tried various sample rates when starting a new project-Updated Realtek sound drivers to the most current-Turned off Bluetooth-Recorded from YouTube In a web browser AND a separate game program-Turned my cell phone off since it was nearbyHere's the strangest part.  I downloaded Audacity and recorded using that program.. no static.  It sounded perfect.  This makes me think there's some setting or feature within Audition that I'm missing.  I'm very new to the software so this is entirely possible.Thanks in advance for your suggestions.

Is there any way to do the exact same thing that the "Skip Selection" tool does but I want to apply this skip multiple times throughout my audio track and I need these skips to be permanent edits saved in my file?  To explain further, I need to make edits to an audio file without deleting anything and without changing the overall duration of the track. Part of the reason that I need the time to not change at all is that I am working with files such as audiobooks where if I delete anything or if I adjust the speed/duration then I'll have other issues with the timecode for the start of each chapter being off compared to the table of contents.  I'm new to Adobe Audition so hopefully, this question makes sense. If it helps, here's a short Youtube video that explains the "Skip Selection" tool. I need to do exactly what's done in this video but I need to do it multiple times and it has it be a permanent edit (or some sort of similar workaround that can produce the sa

Hi new to audition and am in need of a converstion tool to take in .vox audio files and convert them to .wav. The first attempts at pulling in .vox files, I've found the audio are unintelligble and if I try to save as .wav format, they too are not understandable.  Anyone have any tips or suggestions on how I can make this work? thanks in advance for any suggestions and guidance. larr

I've been working on this project for about three hours now and of course I go to export it and everything is grayed out. I can't save or export anything. I've looked at other people who had the same problem and none of the answers have helped me. Is this just a lost cause? Some help would be greatly appreciated, as I really need this project.

Tengo dos tarjetas de audio y haciendo uso de la Multipista de Audition, quiero asignar una pista a una de las tarjetas de audio y el resto de las pistas a la otra tarjeta de audio, pero no puedo pues primero tengo que seleccionar una de las tarjetas en donde se va a enviar el audio.Quiero saber si existe algún programa que me combine ambas tarjetas de sonido (La integrada y una USB) para que adobe reconozca todas las salidas de audio y pueda hacer lo que necesito.Por favor, espero sus respuestas con urgencia. Muchas gracias.

Hallo Leute, habe vor mir einen Mac mini zuzulegen und Audition in der aktuellen Version zu nutzen.Kann mir jemand sagen ob das funktioniert.Wäre super 🙂Danke im Voraus.Viele Grüße SAL

I have been recording podcasts using MS Teams. I create a new multitrack session in Audition using a sample rate of 16000Hz as this matches Audio sample rate of the MS Teams video. 32 Bit Depth and stereo sound. The video is in an MP4 format and I bring this file straight into audition. Once I have finished editing the audio file, which sounds good in audition, I export it to MP3. When I listen using QuickTime player, or within the Teams player, the sounds has a slight distortion (muffly/'shhh' noise at the end of the words, which wasn't there when listening through in Audition. Is there a solution to this?  Thanks in advance!