Audition

This has been bugging me for almost 2 months, thought it was just a 2022 problem, but this happens with the 2021 version as well.Basically, whenever I'm working with multitracks, even without any effects, with asio4all drivers to get less latency, at 512 I/O buffer, it skips randomly and it also makes it difficoult to listen to the whole track... If I want to listen to just a piece, I take the playhead and click on the part I want to listen to, 5/10 times, It plays nothing but the playhead is still moving... What gives?I'd love to know how I can resolve or if this is a known issue at Adobe.Thank you so much for listening, take care! 

Hi! I was wondering if anyone could help me. I have some audio that has come through with loads of background noise - must be a mic fault. I am not very advanced in my knowledge of Audition - i can use the noise remover but that's about it. I've tried clearing it up but it's just distorting the voice. I'm not sure what to do - it's for a work thing that's due tomorrow 😞 Can anyone help? I've got four audio files like this - I've attached one so you can hear the issue. For my usual setup I don't have the background noise, just do abasic noise reduction and amplify. Link to audio  Thanks so much!

Hi !I am doing podcast recording and using a two-line audio box (I have a PreSonus AudioBox USB 96 and a M-Audio M-Track Duo). Both boxes are having the same issue when connected. I have two AKC P120 Mics that are connected in Line 1 & Line 2, the box is plugged via USB to my laptop. I have the channels set as follows:As you can see - Even with the individual tracks input set Track 1 to Line 1, and Track 2 to Line 2, they are both picking up Mic 1 only. Does anyone know why this is?Both mics are functional and I can see the input lights flickering on the box for both Mic 1 & 2, but Audition can't see the Line 2 mic? Any help appreciated - I have been trying to find an answer for weeks! 

I'm using a SSL 2+ audio interface with Adobe Audition. (upgrading from an Audioscience card in my computer. Now I'm having clicks in my audio. Anyone else have/had this problem and if so how did you solve it? Mahalo! (thank you)

Hallo, ich bin auf der Suche nach einer Funktion, mit der man die Betonung eines Wortes verändern kann.   Beispiel mit dem Wort "Auto" Eingesprochene wurde das Wort als wenn danach nichts mehr kommt: Das Auto.   Ich bräuchte es aber als:  Das Auto steht im Halteverbot.   Die Betonung ist halt so gewählt, als wenn nach dem Auto nichts mehr kommt. Versteht ihr was ich meine? Bitte um Hilfe oder Ideen.   Beste Grüße!  

Hallo zusammen, ich bin auf der Suche nach einer Möglichkeit, ganz viele einzelne Ansagen die alle ein einer großen Datei sind einzeln zu exportieren. Meine erste Idee ist, dass ich eine Ansage grob markiere und diese dann über irgendeine Funktion (ich weiß nicht ob es sowas gibt) den stillen Anfang und das stille Ende automatisch wegnimmt, so dass man eine Markierung perfekt von Anfang bis Ende hat.Gibt es denn sowas? Oder gibt es für meine Aufgabe direkt eine andere Funktion? Vielen Dank im Voraus. 🙂

I just bought a program to convert .ses files to .sesx files, because I want to be able to open my old work. Now I cannot find the Ses2Sesx app anywhere on my PC. Who knows how to convert my files. I paid nicely for everything Audition and Ses2Sesx. I do not get it. thanks in advance

Using the Windows version of Audition, latest build 22.2.0.61. I'm batch processing a set of files, some .M4A and some .OGG. The batch process will get about half way and then simply stop. No error codes. This computer has 128GB of RAM and a fast processor, so that's not the issue. Can't seem to find a cause. any ideas? Thanks!

Hello,I have a podcast, and I'm trying to implement live sound effects.  I have a Windows PC, Shure SM7B mic, a Xenyx Q802 USB mixer, and a Stream Deck.  Is this possible, and if so, what else do I need to make this happen????  I've been trying all day, but keep hitting brick walls. I can hear the Stream Deck audio through my PC, and while the Shure picks it up during my recording it sounds like garbage because it isn't using it's own channel in Audition.  THANKS FOR ANY HELP YOU GUYS CAN PROVIDE!  Jamie

I've been recording with an Antelope Orion Studio Synergy Core interface on Windows 10. If I add any of the Antelope Audio effects (AFX as they call them) to the tracks, Audition will start playing back the track with a rhythmic popping noise and then close itself. Is there a way to fix this? I've already set my Thunderbolt buffer to 512 and made sure everything was recording/playing back at 48KHz, not with conflicting sample speeds.  Normal recording and playback work great. The Audition effects have no issues. It's just when trying to utilize the Antelope AFX.

Hi all, new user of the newest version of Audition. I have an issue with a delay in recording after track 1. When I record track two, there is about a 1-second delay in comparison to track 1. I see the delay while recording when looking at the track although when actually recording and playing along with track 1 it is in time. A second note is that I recorded my first song and did not have this issue which leads me to believe that it is not a hardware/ sound card issue. I am using an external sound card - A behringer U-phoria UMC202HD. I didn't change any settings between song one and song two. I did notice the latency was set at 200 so I reduced it down to 30 which is the lowest setting. That did help some but there is still a slight delay.

Exporting my multitrack file to MP3 and its missing several tracks. Mixing a song with voals and only the song made it to mp3 missing vocals. 

How do I reset the window layout of Audition v 14.1?

I've messed up my layout completely and everyone seems to suggest this hold shift + open trick. It doesn't work – at least, not for me. I know I'm doing it properly, because when I try it, the new user tutorials pop up. But the layout is in the same messed-up state. I can't see anything about layout in Preferences either.  Does anyone have a solution? I've installed the most up-to-date version of Audition, and I've been using the software for years now. 

I need to batch process a lot of WAV files and I want to have two effects applied to them in a specific order. I started to record a favorite. First I added 30 band equalizer rffect then match loudness afterwhich I stopped recording favorite and save it. However, when I went to apply the saved favorite, only the  equlizer effect saved not the match loudness and I don't know why. I tried it several times and only the equlizer effect saves to the favorite.I don't want to apply the match loudness seperetly since I want to do a batch process and apply both effects at once as a favorite with the EQ applied first then the match loudness. Can anyone help?I am currently using version 22.2.0.61 of Audition.

Hello, I just bagan editing my very first audio clip for a class project to make a podcast. I recorded a phone conversation using my call recording app on my phone. It created an .amr file, which was readily converted to .wav by Audition. I have been using the call-recording app for years and in the past when reviewing recorded phone calls, the disparity in volume was always an issue but then again I wasn't using them for making a podcast but didn't think it would be insurmountable.For example, my own voice spans the entire db range, whereas her voice tops out at about -21. I selcted a small portion of her voice and increase the volume to, oh, about -12 max, but it's still just barely audible.So, am I doomed? I didn't do a test run because we hadn't spoken in so long, I wanted to capture our initial excitement. And there were some revelations on this call that would make my surprised reaction impossible to recreate. We're on separate coasts so in-person is not possible. To yo

Every time I open Audition, I have to re-configure this crappy setting to something that is actually a fair quality output. I have looked at the various articles here on this topic, and read all of Mr. SteveG's annoyingly rude responses---that nothing can be done to set Save defaults. Yes, there CAN be. The question, is WILL there EVER be?  Sure, the user may create a custom setting in this area to use, WHILE THE APP IS OPEN. But upon closing then reopening the next work day, sur-frickin-prise, there's that lovely MP3 at 24000 stupid hertz setting ready to screw up my audio again!! I only have to choose the custom setting again, says Mr. SteveG. Dude? I may as well recreate the stupid custom setting again while I'm at it.   I have a million steps to deal with in my work already. Why do I need this one?? PLEASE create a fix to allow one to save a default Save output setting--THAT ACTUALLY REMAINS AFTER THE APP IS CLOSED AND REOPENED. It's possible. But you

I've just had a huge upgrade to my PC rig, partly because I process large files using the effects rack in Adobe Audition. But upon processing my first files with this incredibly fast processor, I find that it is no faster than my old laptop, takking about the same amount of time.Looking up the resource monitor, Audition is not utilizing any of the available resources to speed this up! No cores are maxed, the GPU is at 0%, plenty of available resources... Why is it still so slow? Where is the bottleneck? Is it in the software architectre, or built-in throttle? Picture to illustrate: My system is top of the line, brand new, assembled last week, and the Adobe CC install is fresh yesterday. Any insight would be welocme...

Hey,I keep getting Error 205 when I open Audition.I'm on Windows 10 20H2. Any other Adobe program just works fine.I tried reinstalling it but it didn't help.  

Yesterday I used Audition for the first time to take away some background noise for a panel discussion I filmed. I used the Noise Reduction process. I saved the audio as a new file. But now I see it applied the effect even to my orginal audio meaning I dont have the unedited raw audio anymore. I need it now since an audicen member asked a question in the discussion without a microphone and I want to see if it was picked up at all since it's completley gone with the noise reduction effect. I opened up the audition file and now I can't see where I can remove the effect.  It's not under the Effects Rack. I don't understand how it saved this effect to my orginal audio as well and now I can't figure out how to take this effect out. Any suggestions please?

Audition isn't recording audio from the internet and I haven't changed the settings on my Focusrite interface.  It was recording audio from my studio mic and from the internet last week when I was working.  I have reinstalled Focusrite interface, checked my settings and both input and output are set to the focusrite and I updated Windows.  Audition shows to be up to date.  And it's blurring out the stop button when I'm recording which prevents me from stopping it. 

Trying to use  BCF2000 with Audition. What are the steps to get it running?

HiI recorded six mics into Audition via a Behringer XR18 onto an external SSD the other day and had these strange regular dropouts occur all the way through.They don't look like normal dropouts to me, more like very short delays.I haven't been able to reproduce the effect since.Anybody got any ideas?

I've used Audition for 20 years and must have had a stroke or something because I cannot remember how to mute/turn off the left track when I'm in waveform view. My recollection is that there is a single click some place that allows me to turn off one of the tracks when not in multitrack mode, but I cannot find that button. Please remind me where it is before I pull out my hair. Thanks.  Here is what I can see (below).

This is a feature request seen every year dating back to 2009.  Audition team...WE NEED, WANT, WOULD LOVE TO HAVE, organizational bins added to Audition so we can keep our projects organized.  I use Audition to edit a podcast and with hours of audio, interviews, sound effects, and music a bin system like you see in Adobe Premiere, and After Effects is a must.  This could be the year.  Please get on it!