Audition

The program suddenly stopped working. The following sentence appears: "Code execution cannot continue because MSVCR11o.dll was not found. Reinstalling the program to fix the problem." I already uninstalled and reinstalled without success. What do I do now?

I have two mono tracks. One is a music track. The other is FSK timecode. I need to put these two separate mono tracks onto one stereo track. Music = Left Channel, FSK = Right Channel. Can this be done using Audition? 

Hello - apparntle there is a new preset called Cleanup Podcast section in Delete silence section of Diagnostics. Although I have the latest version of 14.2 These options don't seem visible in any of the dropdowns. I can't get any reply from customer service so asking here.....

I have a much older XP version of Adobe Audition.  I have to convert my audio files from 128 bits to 193 bits but my version of the software, from what I can see, does not offer 192 bits as an option for conversion.  Can someone explain if I'm not looking in the right place or if I need a newer version of the software?  Thanks. 

Found that using Insert Silence.... get this failure     Normaly would be 8 seconds of silence area for my mix.   Moving cursor just highlights more of area, more and more.   Must shut down audition, reboot to get back to "normal audition".   Contacted adobe support last week, still awaiting answer.   audition build 14.2.0.34   Also tried creating shortcut key CTRL SHIFT x for insert silence, same terrible window above    

I don't knoe what's changed! The "kill the mic rumble" preset was working just fine untill a few weeks ago!Now it does nothing! It will not change anything!

I know this issue has come up a few times but so far I have not come across a solution that has worked for me. Audition was working just fine for me for a while but recently the audio it was been recording is very quiet... to the point that in order to hear what was recorded I have to crank my speakers and computer volume all the way up to hear even a little bit of what was recorded. I play trombone, and I can play it loudly, so I know it is not an issue of not being close enough to the mic or anything like that. Attatched: screenshot of my playing close to as as loud as I can with mic gained to the same levels it was before the issue started happening. If it helps: I am running Audition 2020 and Windows 10

Trying to do the Audition tutorials, specifically the noise reduction one. So it says to use Spectral Frequency Display, and points to the button to do so. But when I click the button nothing happens. So then I thought, ok...... I am just trying to reduce noise on a recording, so next step is "Open the Noise Reduction effect" but when I do so, Effects > Noise Reduction / Restoration > all the top options, such as "Noise Reduction (process)" are greyed out. What is going on?

Hi,we are transferring shellacs from the 1930/1950.The output is a 32/96 mono WAV file.After declicking, EQing and mastering we offer two formats.A 24/96 flac and a 16/44.1 AIF (Red Book CD Standard).Until now we used a standard setting for dithering in Audition for sampling down. The adaptive noise shaping one.But I wonder if there are some subtleties I may take into consideration, or am I fine? The output itself sounds fine.BestTristan

Automatic crossfades are enabled in the clip settings but when I overlap 2 clips they no longer crossfade. Ive uninstalled and reinstalled and still nothing. Anyone have any ideas?

I've been recording in Adobe Audition for years. Suddenly it's recording jittery audio in the middle of a project.  Re-starting the session helps, but I have to do that multiple times just to finish a 60 second commercial.  Help!

How do I import analog reel-to-reel audio into Abode Audition?

I'm losing my mind here...Audition was working FINE until about a week ago, then stopped.I'm running MacOS Catalina v 10.15 and only recently has Audition (v14.2) stopped working.I've tried uninstalling.I've tried CreativeCloudCleanup.I've tried reinstalling.Nothing is working and I'm very frustrated.I also have a tool called CylanceProtect installed by my IT dept that is seeing "dvaaudiodeviceui" as a threat and is quarantining that file.Any ideas/solutions/help?CC: @SteveG_AudioMasters_ 

Hello Chums, I am wokring on dubing & relaying VO tracks a series of films for Africa for a development agency. Many of the VO rcordings have seeminlgy been recorded on cheaper mics. I have now done dozens of thses short films and I have experiemented with several ways to fatten the sound which often seems to lack presence and tone. There are some very handy presents in the various standard Audition EQ tools, I am using some compression and other filters for pops, clicks and noise etc. i am using a rboadcast compressor on the master bus and I can manage to have things sounding 'OK".But, in the never ending quest for decent tone, I'd really like to hear any tips & tricks for sewateing up cheap mics. I appreciate I can't replace what is not there, but there maybe a few nuggets of info out there...Thanks

I tried to search the forums for this but it's a little difficult to word, sorry if it has already been covered and for my lack of experience in Audition! I work at a live music theater with an original variety show. The production crew has given me a video file of the entire show and tasked me with making an audio CD to sell in the gift shop. I am a graphic designer and have the full Adobe suite and I have played with Premiere and Audition enough but am no audio/video editing expert. I have opened the video in Premeire and exported the sound to a .wav file. I open that .wav file in audition and mark tracks, create CD layouts and then burn the CDs. Here is my question: how do I force the CD to play continuously between songs without leaving the 1 or 2 sec gap between tracks? The tracks themselves are exactly aligned and, if you don't skip tracks, you should be able to listen all the way through as if you are listening to the show live. However, the CD player is pausing a second or two

I tried to install adobe audition but my creative cloud says it's "not compatible" and that I should update my mac to a higher version.However I have the highest version, so I don't know what to doModerator: Title changed and moved to Audition forum

Ive seen all the YouTube clips including the Adobe official about how to set up the podcast.Equipment: Blue Yeti microphone, Google meetsmacOS: Big Surlatest Adobe Audition I would like to invite the guest on my podcast from zoom or Google meets. However the host is input set as my microphone. but the input of the interviewers does not have the internal audio as a preset. audio software from preference only allows you to select single option, hence I'm having trouble separating my channel and my interviewers channel. i have blackhole, ladiocast installed but I am not sure how to connect these two into Adobe audition. Anyone can help? 

I use Adobe Audition for music and this year I have encountered a problem with a recorded audio where it sounds like the levels are fine yet there is this constant static sound all throughout the recording. I have updated, un-installed and re-installed the drivers yet the problem is still there, Pls help. I have attached a sample file

Estaba utilizando la aplicación y me apareceió el mensaje de que por ese error no puedo abrirla.  Hice todo lo posible, reiniciar, reinstalar, volver a instalar incluso los archivos en los cuales me marcó error pero no ha funcionado nada. 

For some reason the microphone will only work if I remove my headphones from the interface and plug them into the laptop, but than I get a horrible delay time in my recordings. My headphones will only work from the interface if I use the default laptop microphone, but the issue with that is I need to use my microphone of course. So I have no monitoring, terrible delayed recordings and Everytime I try to set up my Onyx in the audio hardware settings, I get "MME device internal". I've tried everything to my knowledge and yet this issue persists. It was working for the first 20 minutes of me installing the program and than boom. Out of nowhere my DAW just does this to me. I need serious help here please. I'm not too tech savvy guys so sorry if I do a dumb.

Hi everyone, I'm a newbie on Audition and am having a Newbie Nightmare.I have digitised an old cassette tape, of a live concert, from 1984.I mucked about with a few settings and effects, a bit of EQing and a successful stereo widenting (Effects Rack/Presets/Stereo Widwener Wide (Hass effect), and the resulting file sounded so much better.I've tried exporting the changed audion to WAV and MP3 - and in both instances the results sound dreadful. EQ changes are lost, stereo is lost and the original mild distortion has almost doubled.I even tried an A/V screen capture of the whole 90mins of the audio playing in Audition - same result.I know I've probably had the source file too loud, but it DOES sound great in the Audtion build. I have no experience about mixing, but this is driving me around the bend ..... what am I doing wrong??

QUIERO ESCUCHAR VINILOS DESDE MI PC Y PARA ESO ADQUIRI ESTE APLICATIVO, PERO CUANDO PONGO UN VINILO EL VOLUMEN DEL CANAL DE PISTA ESTA DEMASIADO SATURADO, POR MAS QUE TRATO DE BAJARLE EL VOLUMEN SOLO BAJA DEL MAESTRO PERO EL DEL CANAL DE LA PISTA SIGUE SATURADO

I'm using a new laptop with windows 10. I use a Rode NT1 wth the AI1 interface. all the settings are the same, default for the most part. As soon as I start recording I get a constant static at -53db. There's no sounds from anywhere. I can't get rid of it afterwards as it affects the voice as well. Is there something in the settings to shut it down. I don't want to try and fix it afterwards. It never happened in the old laptop, which my wife uses now. when I reverted back to that, everything worked perfectly. Why would I get static? Any tips? Thx

If i am listening to my final audio with the loudness meter in the specific audiotracks (track 1) i get a perfect result, however if the loudness meter from the mix track i get a 3db lowering!there is only 1audio present in this file, no effects (other than the two loudness meters). How can this be?  

Is there a way one can apply a preset one has made from the effects rack to multiple audio clips (extracted files from premiere) at once?