Audition

Hi. A friend of my family gave me a video recording of their child's Bar Mitzvah ceremony, recorded by the Temple where the ceremony took place. To the family's horror, the soundtrack is awful. Forgive the lack of the technical term, but the audio is repeated a split second after it is heard the first time, and as the repeat is heard, the volume drops suddenly. It's like hearing the audio, and then a split second later, hearing a delay of that audio. The Temple doesn't know what happened, and the family is devastated and asked me if there is anything that I can do even slightly to improve the sound. I have tried a few things, but to no avail, as I have never dealt with anything quite like this before. Are there any suggestions? I would be very grateful.

Hey I am sure that this has been asked several times and I have seen similar queries but have not seen any answers that are current or completly relevant to me. I would continue to look for answers but this website is so slow and cumbersome that it has taken me about 15 min to get here just to post and it keeps dumping me back to the general choose a comunity page it seems without a buffer so it has to reload every time then I have to go to the audition page search the forum then start over again. tldr:I am trying to use my Arturia Keylab 49 with Analog 5 and Pigments to add sound effects/ music to my projects. I am not expecting to create loops or lay do any serious editing I just want to hold down a key while I watch the video for timing is this possible with audition  or any of the adobe suite?If not why not? I am actually asking this seriously.  I mean there has to be other Artist that need this feature.Finally if it is not possible to do what seems to be a very basi

Hello.  Sometimes when I record in Audition, I will connect with an engineer remotely via ZOOM.  Then I will share my screen with the engineer so they can take control of my computer during recording.  ONLY when I SHARE my Zoom screen and record in Audition do I get abominable static and crackling in the recording file.  You cannot hear this static/crackling sound during recording; ONLY in the playback.  One time I had recorded about 15 pages of copy only to find out later, the whole file was unuseable because of this. My engineer, then downloaded Reaper to record in instead.  I still shared my screen with him via Zoom and we had absolutely no problems recording.  The files came out clean.  Thanks in advance for any offers of help. What is happening in Audition that is causing this static and crackling sound?  Has anyone had this experience?  I cannot get it to stop.  It only happens if I share my screen.

 Hi...Does anyone know if Lethal Audio compatible with Adobe Audition? I have adobe Audition... though I need Lethal Audio or ReFX Nexusunfortunately Audition doesn't support ReFX Nexus, but does anyone know if it supports Lethal Audio

Hi,a recording on my smartphone (saved as WAV) plays Audition incorrect in double-speed (Mickey Mouse voice...). Only after saving the WAV file just as WAV again with Audacity solves this issue. Only difference original file vs. saved file in the info tab under "Format":Waveform Audio 32-Bit Interger vs. Waveform Audio 32-Bit Gleitkomma (IEEE) vs. Please note the correct duration of the "Gleitkomma" file, too! Can't find any setting in the preferences, no bug fix and similar. Thanks for helping me!mycc

I have Korg nanoKontrol First Version in 2008 and i can not set-up on Audition. First time, i try install driver to my computer, i saw the midi name "Korgnanokontrol" in control surface and i can't control everything on controller, i'm restart my computer but midi control it gone and never come back Please help me, I hope someone will solve this problem. Without having to purchase a new control or need to use other software. thank youPor  

Hi. I'm using Adobe Audtion CC 2019 (the newer versions don't work well with my plugins for some reason). At any rate, wondering if anyone can tell me how to import my session templates and effect presets from a complete back up of my computer. Those templates and presets are the fruits of 2 years of tweaking and it would save me a lot of time if I could import them.  Basically, I'm presuming that there is some hidden folder(s) on the back up that I can copy onto the hard drive of my new computer - so the question is where do I find them on my old computer (back up) and where do I place them so that Audition can find them on my new computer?  Thanks in advance for any help.

I am looking at the new iPad pro 11-inch, but before I consider it, does the Audition software run on it? 

Hello,  I am trying to edit a Premiere Pro session in Audition using the Dynamic Link, which is regular part of my workflow, and  now Audition crashes every time I try to do that. I had automatic updates enabled, and think my computer just updated Premiere Pro to 15.2 and Audition to 14.2 since I used them last week. I have a 2020 Mac with an M1 chip OS 11.3.1.  I am able to open Audition and import files independently, but it is not working with the Dynamic Link. I have tried restartign my computer, unistalling and re-installing Audition, restarting my computer again, and force-quitting all Adobe products through the activity monitor.  Thank you for your help.Honna  

Hello,  I have problem to quit Adobe Audition program because of this problem that you can see on the picture.I tried to find what is on action, but nothing is on action. It says that is still recording or whatever but nothing is recording nothing is on. I can not do anything with my PC now, i can not restart, force quit or update a computer. Can you please helpe me with this?? I have Mac OS. 

For awhile now ive been using the same saved plugins for my vocal editing. usually its, waves cla compressor,  slate digital preamp and waves API 550 eq. ive always wondered why when i usually tweak the api 550 i get a slight fuzzy sound...its only there and gets louder as the signal for the vocal comes up. since the api is a analog modeled plugin..do you think this is mimicking a natural line noise sound...or does this mean that my vocal level is being pushed so high that im getting the airy fuzzy sound? its only there if i add certain plugins..being that im recording with a u87 through a couple other outboard gear and my booth is treated...its pretty silent in the raw recording. any suggestions?

Does anyone out there know how I can rescue my favourites etc from a new  Auditionversion 14.2 back to 13.0.13 Here are the details;I use version 13.0.13 Audition to narrate audiobooks but I signed out of Adobe Creative Cloud a couple of days ago in error,, and spent several frustrating hours trying to persuade Adobe that I have been a paying customer for years but still could not get in.Finally, Adobe relented and believed me and remotely took my desktop, and cleaned, uninstalled, reinstalled, and 40 minutes later they announced success. GREAT , EXCEPT, the new version of 14.2 has been installed. This morning I immediately noticed the same digital blocking of my spectral display, that I had had with 14 which had driven me back to 13.0.13.  So I have re-installed 13.01.03 and it works fine, but of course, I have lost all my settings. So this morning I started to macro favorites, AND DID NOT REALISE THAT I WAS WORKING ON 14.2 which is still installed !!!So is there any wa

If I normalize and compress in waveform (applied but not saved), will these effects be carried over in multitrack (when saved/exported)?

I know this is a common problem, but I've read through many different threads and watched many videos, and none of them have the solution for my problem. Hoping someone can help. My objective is to record a voiceover in Audition using my ATR 2100 mic. This worked for years, but now suddenly, Audition is not getting a signal from the mic. The mic works with other applications and an external recorder. All the Audio Hardware settings appear correct... Audio Channel Mapping appears correct... I also tried a multitrack session, and armed the input to record, and then pressed the record button. The time indicator started moving, but no indivation of any signal from the mic. I also tried updating to the latest version of Audition. Any  Computer: iMac Pro (2017)Microphone: ATR 2100

Please add a feature that will show markers on imported WAV files in Multitrack view.  They are visible in Waveform view, and the markers panel but not Multitrack view. 

Please add a feature where users can for lack of a better term "flatten" a track to remove all of the underlying files created by punch and roll recording.  This will allow for easier editing.  Currently the only way to do this is to export the entire in mixdown as a new file and then bring it back into the multi-track session.  This is a lot of needless work.  Adding a simple "flatten" (like flattening layers on Photoshop or Indesign function will save a lot of repetitive work and wasted hard drive space.  Speaking of watsted hard drive space, the flatten could aloo remove those underlying files that were recorded over saving users HD space. 

I work with someone who is using a different program from Audition, he sends me WAV files with markers on them.  When I bring that track into Audtion, I can see the markers in waveform view, but not in Multitrack (well, I can see them in the markers panel but not on the actual track).  Is there a fix here?  Some online vids have what seems to be an absurd workaround involving importing them to a CSV file and bringing them back in, blah blah, but that seems ridiculous and I don't want to do it every time I get a file.  Thanks in advance for the help folks!  

Actually, not just Audition, but any of the Adobe programs? Each time I upgrade I have to start over.

What is the best practice for removing the junk lurking underneath a punch and roll track so that when I wish to edit, that "junk" is no longer there?  Right now, the only way to do it is cumbersome: Export / Selected Clips - saved in wav of course adding extra data to storeGo to finderFind trackGet track from finderDrag new cleaned up track back into AuditionStart editingPlease tell me there's a better way (begging emoji) - you'll be my hero!  Also from a data storage standpoint, I'd like to figure out a way to rid my files of these bloated punch and roll files but the naming convention and other factors are such that it makes it an unnerving and slow process to delete files as one is never sure they're deleting the correct one.    

OS: Windows Vista Ultimate x64, SP1I installed the Adobe Audition trial installer, as well as the Audition 3.0.1 patch.  Both installs went very smooth.Tried to run AA3, and get the "this is a trial version" message.  Clicked Continue, splash screen comes up, and then the app itself finally shows up, but I get an error message right away:Shutting Down: To continue working where you left off, please restart Audition.After that, AA3 closes and I get:Microsoft Visual C++ Runtime Library Runtime Error!R6025 - pure virtual function callAs of yet, I have been unable to completely load the program even once. I looked around for a few quick tips, what I found:uninstall QuickTime (I don't have QuickTime installed)clear out %appdata%\Adobe\Audition\3.0Remove (or rename) C:\Program Files (x86)\Adobe\Adobe Audition 3.0\en_us\ImporterQT.prm... none of which helped any.   Can anybody help me with this?

Everytime I want to open one particular project, the whole app shuts down! What do I need to do? 

The audio transition effects like constant gain, constant power, exponential fade etc. are very useful in Premiere Pro. But why these are not available in Auditon? Audition is an audio editing software and these awesome audio transitions are not available in Auditon!So, I request to add these transitions in Auditon. It would help many users.Thanks and Regards.

Hey Guys,  I have seen a lot of videos for Mac Users fixing this problem, but nothing for Windows.  I want to assign tracks to different inputs.  Track 1 - USB Rode Mic, Track 2 - Skype or other audio.  I was able to do this in Voicemeeter Banana, but for some reason it stopped working for me. Any thoughts on this?

Is it possible to remove a preset that is no loner shown in the history for a file? I went through and edited my files and then added some presets. Saved them and they were then applied to the .wav file.  I know which presets I implemented, but I no longer see them in history. Is it possible to revert them now?

What do I need? Can I use Adobe Audition with a mac and a good pair of Senheiser mics?  Regards! I'm a Novice 🙂