Audition

I love Audition. But one argument that I frequently lose is that Audition sucks at handling playback speed. People are spending countless hours editing audiobooks, youtube videos, and podcasts and we want to go faster. In Audition, there are only a couple options for this. One is JKL shuttle which is horrible. It's too fast for accurate detail editing at any speed that it can be set to and it chipmunks like crazy. The other way is to time stretch it down, work through it, and then time stretch it back up. Doing that also chipmunks and adds some strange gravel sound to voices and it also causes issues with marker placement. Why can Audacity and Reaper have far superior playback options than Audition? Especially Reaper's ability to maintain pitch while speeding up.  I love Audition but time is everything when editing long form and that feature alone is enough for me to switch to Reaper. The last thing that I want to do is learn a new DAW but this is something that Audition should ha

Hello All,I create short films, and I usually do most of my audio post in Premiere. I'm teaching myself more Audition because it's obviously a far superior program. Every time I get to this stage, however, I hesitate because of the following problem: When editing dialog, fixing those room tone shifts is often the bulk of my work. My method is to dig around for slices of room tone deep inside clips, combine the slices, smooth them over with crossfades, reverses, etc. This is a little easier to do in Audition for a number of reasons (I like being able to combine clips into one file, AND the reverse speed often doesn't work properly in Premiere!) I use the "Edit in Audition" option in Premiere to bring the project into Audition, but, as we know, it only allows you to bring in 9.9 second handles and then exports extracts.If I want to search for room tone beyond those 9.9 second handles (which is quite frequently the case) is my only option to re-import the original audio files into th

(Audition CC) Right in the middle of a multitrack session mixdown, my Audio Hardware settings began defaulting to 48KHz even though the session is set for 44.1K and all of the files in the session are 44.1K. This results in horrible sample dropping during playback and renders Audition unusable. MME did not throw up any errors or warnings, and MME is the only Device Class that will recognize my devices. The sample rate listed under Latency: (48,000Hz) in the Audio Hardware dialog is unchangeable. This dialog also indicates a sample rate of 48K no matter what file or session is open, and the vast majority of my files and sessions are 44.1K and are all unusable until I get this solved. Any thoughts on why this is happening or what to do about it?

Hello. Until today I was able to select one portion of my audio and add an effect, such as to de-ess a specific portion. But today every time I try to do that it does it to the entire clip which degrades my audio. I have no idea why this started happening or how to fix it. Please let me know what to do.  Thank you

Recording in Adobe Audition 2021, default settings are in place and I still can't record. If I press the red record button, nothing happens. Doesn't begin recording. Help!

I have downloaded and installed the Rode ASIO driver for Windows, and have configured the Podcaster to accept the USB & microSD card. I opened up Audtion and under preferences>Audio Hardware, the device class is set to MME, where I see under the input dropdown >Mono> [M01] Microphone (RODECaster Pro Multichannel) 1 and [M02] Microphone (RODECaster Pro Multichannel) 2. All the other RodeCaster channels are missing. If I switch to device class and set to ASIO, and choose RODECaster Pro ASIO, I get Error message "Not working - The device did not start". USB cable into computer from Podcaster working as the computer recognized Podcaster and I completed a firmware update to current version (2.1.2). Any ideas to get all eight PodCaster channels identified in Audition?

I'm used to scrolling on a timeline with two fingers but all of the sudden that stopped working but single finger works. It's driving me crazy. Anyone has any idea how to rest this? 

Amigos! Cuál es la configuración correcta en entrada de audio y salida, latencia etc... Porque grabó en multipista, pongo mi beat en el track 1, en el track 2 grabó una voz y cuando quiero grabar un 3 track ya se defaza del track 1, no coincide la voz, le he intentado de muchas formas, y no encuentro la correcta aún

My sound wont export with the mp3,can not find the master choice?

Good morning,I'm doing a music podcast that uses old 7" singles in which some have the 60s wide seperation stereo, standard stereo, and mono tracks, as well as digital music.The probel I have, is levels. I use the match level option to -14LUFS, but I still get sme files quieter, and some louder, depending of the age of the track.If I was playing out live, I would be using a mixer, and control gain, but for this podcast I do on my laptop. On the mix channel, I have FabFilter Pro-Q to kill some of the muddier low end, and I use Izone Maximizer for limiting. With the limiter, I could push it so all tracks trigger the limiter, but then some will be too compressed.Does anyone have any suggestions to get a more even level, for a better listening experience?

I'm working in AU in Adobe Creative Suite, v. 22.1.1.23.  I finished a multi-track session with autosave on (6 or 7 saved copies) of .sesx files.  ALL of them were empty when. I reopened them.  So where are all the support files hidden?  5 hours of work.  Ridiculous...

my homework was confusing me quite a bit, and i was hoping someone here could help me. I added the dynamic processing to background music, but i cant figure out how to sidechain it to narration. side chain just isnt an option available for me. when looking at the picture that was provided in my homework, i noticed some differences. in the provided pictue, theres is the option to toggle the side track, but i dont have that option. please help me understand what i did wrong.here is a picture of what im doing: and heres a picture of the sample   here is the assignment instructions(im stuck on numbers 3-4):"Open the Multitrack Session named Side-Chaining.sesx in Audtion.from Chapter 09content. (Fig 1)2. Apply a Dynamic Processing effect to the insert of the Background music track. (Fig2).3. Enable the Side-chain button on the Dynamic Processing effect (Fig 3).4. Switch to Send mode in the track editor and add side-chain send for the Narration channel. The only option sh

I have a track with light noise intermingled with the piano and vocals (from a microphone rubbing on something, I think?). Unfortunately, I can't have it redone, but have been trying to eliminate the noise in Audition. Normally, I'd capture the noise print and voila, but I don't have an isolated part with the noise alone. It's always mingled with the instruments, so I'd be eliminating the music along with it. I'd love any suggestions on how to best get rid of this sound while preserving the music. To give you a precise idea, I clipped out a teensy bit of the track so you can hear the noise mixed in with the piano. You can hear my sample snippet online here:https://sndup.net/cjqy/ Thanks so much; would really appreciate some guidance.

HOW TO SET UP MIC INPUTS, IN AUDITION 11 TO RECORD USING, M AUDIO FAST TRACK WITH PHANTOM POWER, ON MSI PC? HOW DO I SET THE ASIO SETTINGS? GOING CRAZY OVER HERE. 

Hello Everyone. Inside Effect Rack, Whenever I add the Multiband Compressor-Broadcast to my Clips, It makes my Clips Sound much better.What do you think about the Multiband Compressor- Broadcast?Thank you very much.

This has consistently happened every time I use my current workflow for adding music to a VO in Multitrack Mode. I open my template (2 tracks. 1 Voice and 1 Music with some plugins in the Effects Rack). I Save As... the new file name. I drop the voice into Track 1. I drop an MP3 into Track 2. I enable Remix on the music. Drag to get the music length where I want it. Tweak any of the plugins that need to be tweaked. Then I Mixdown Entire Session to New File. I then Save the SESX file.  If I open it again, the remixed music is still there all split like it was before, but the actual waveform is gone and if I play it the music is just silent. If I double click on the segment it opens the music and it'll play just fine, it just is blank in Multitrack mode. The only way I have been able to fix it is to delete the segment, readd the music, and remix it again. If I Save it and open it immediately back up the waveform is gone again. 

Hi, I'm using Center Channel Extractor in one of my tracks. I have split my track into several clips, and I want to use different Frequency Range in each clip, or in some clips I don't want to use this effect at all. Unfortunately, when I close the program and open it again, all the Frequency Ranges have changed to Start: 20 Hz and End: 22050 Hz, which results in the track sounding awful.  I have made presets for this effect for each different clip that I want and set my own custom Frequency Ranges. Yet when I open the program, open the file and edit the effect, it shows that I have the correct preset chosen, but the frequencies are completely wrong. I need to choose the preset for each clip every time I open the program again and I find it laborious. How can I make the frequencies to stay as I want them to stay? ThanksNina

hey,my schoolclass and i did make some recordings for our school. I was in charge of the audio. I never did something similar like this before. Now in the post production we noticed that the audio is broken at some points. My Guess is that the a false microphone recorded the voice.... Is there any rather simple fix to solve or art least better mistakes like the short part attachedregards per-Luca

When I click on 'OPEN' nothing happens. What could be wrong. Subs are up to date and so on..... 

Hi there,Can anyone help.I am using 1.5 and can't find anyway to save CD project.  Does anyone know if there is one?If there isn't, is there another early version of Audition where this was brought in?Thanks!

[Mod note: Given a thread of its own]   Everybody has the ``free'' CS2 formerly downloadable copy with its' endemic serial number - or as you said can easily find it online - and a few people have or can find the 3.01 or 3.11 to lay on top of that, but whether you copy the whole program you downloaded including its' serial number and unique installer that works with that specific serial number - it still gives strange error messages inbetween.   Sometimes files won't load, sometimes you can't save, sometimes you can only save to a low-res format sometimes the save has an automated voice talking over it etc etc etc.   Thousands of low-budget radio stations are still using it the same as they are using the Loopology to make their spot beds - I heard one the other day on a brand new spot and had to shake my head.   The other thing even major-label production houses are doing - with the resurgence of matrix quadraphonc enthusiasts coming out of the woodwork - is the fac

i'm using 2017 Audition to try to analyze energy distribution of music so i can design speakers that properly allocate available power to different frequency bands ( woofers vs midrange vs tweeters ) ...   i am having an issue ...   Audition on most tracks shows 30 decibel differential between peak of bass kick at 50 hz and begin of high frequency rolloff at 10 khz ...   that is to say it shows 50 hz as -20 db and 10 khz as -50 db ...   screen shot below is analysis of the entire track " PSY - Gangnam Style " for example ... but other tracks look similar ...     but over at a speaker building forum i saw data posted that shows only 15 decibels for the same drop:   https://techtalk.parts-express.com/forum/tech-talk-forum/64801-musical-genre-specific-average-spectral-content   15 decibels is suspiciously HALF of 30 decibels, yet the overall shape of the curve is actually basically the same ...   they both show peak at 50 hz and rolloff beginni

how can i save these window options like foto....? thankx

Hi, So I'm mixing a feature film that is 90 minutes long. I'm currently running around 32 tracks in a 5.1 multi-track session. Everything seemed to be handling fine for a while. After I purchased and imported the 2 plugins from Izotope, Audition has seemed to become glitchy and lagging.  I've pre-rendered the tracks that I'm not currently working on that had heavy plugins in use on track effects. My workflow has become much slower with all of the spinning color wheels and freezing...Was curious if anybody had experienced issues with the Izotope plugins "Voice De-noise" and "De-hum"? Or is it just problematic, because they are pretty powerful plugins that require a ton of CPU usage? Thanks so much for any replies. If you know of any ways to reduce CPU usage or to somehow reduce performance issues, I'd love to hear about it. Oh, also, I'm reading all the files off of a 4 TB SSD that has speeds of 1050 mb/s. Thanks!

Hello, i started using Au today for rap but my the software says there is a problem with my sound equipment and when i go to "preference" it says everywhere (clock, in and out) that my earpods are not working. But when i select "no enter" as enter i can hear the music but obviously can't use the mic. Please help me 🙏