Audition

I have installed Cool Edif 2000 on Windows 10 pro, It's OK, it's the trial version. It's the normal way.I click on "buy now" to enter my ID, but in this window "enter serial number" is grayed.What am I doing wrong?

Hi all, Whenever I try to cut a small fraction of audio in Spectral Frequency Display I find that many times a random artifact, appearing as a line and sounding like a pop, appears at the edge of wherever I cut audio. It only happens when I use Marquee Seleciton, so is there some reason for this? If so, how can I turn that off? Image attached. Thanks in advance!

I have a bunch of recordings that have separate files for the left channel and right channel.  What is the best way to combine them to make a stereo file?  Would I use the multitrack editor or is there an easier way? 

Hi all, So I'm editing an episode of a podcast and has to clean it up a bit in a multitrack session before mixing it down and putting the finishing touches on it in waveform frequency display. I started listening to the file and noticed there there are weird lines of negative space breaking up the audio files of the guests. They are all from Microsoft Teams, but besides that I'm not sure why this could be. The sound is not terribly off but I wonder if it was because I inserted it into a preset multitrack session template. Is there anyway to undo said lines? 

Drivers are up to date. Audio works fine and  I can see the video if I stop playing it, but if I resume, black again

I have a tremendous amount of static in this accompaniment file.  I have scoured the internet, and all anybody says to do is use the Declicker, but the declicker has absolutely no effect on this clicking/popping/static.  I don't even know what to call it.  Can anybody help me??

Panic situation. Somehow, my entire VO demo has been over written with a 1s loop of one of the voices. When looking at it, the Spectral frequency doesn't visually match the wave. The 1s loop is played even where the wave shows silence, between audio clips. Through my headphones I hear the audio from the Spectral Frequency, not from the wave. The wave appears to be intact, but the Spectral Frequency isn't showing a true picture of the wave. I've searched the net for info, but there isn't any on this problem. Any advice???? I don't want to have to do these characters all over again.I've attached a screen shot of the file as it appears in Adobe Audition. I hope you can help me find my work. Thanks. Richard StringerRichatzie2000@aol.com     

A client wants a phone system recoding done with these specs: ITU G. 711 mu‐law 8000 Hz. Please clarify what settings these would be for saving in Audition.  Is this PCM?   Thank you!

I just downloaded Audition on my M1 MacBook pro and am disappointed to say that the program does not work with Apple's built-in screenreader called VoiceOver. The menus work and are accessible, but the actual interface is not at all. In fact, I cannot even enter Audition's interface. I get stuck at the top above the window where my otpions are Close, Minimize, and Zoom, along with the title of the window, "Adobe Audition 2021". Does anyone know of a fix for this? Perhaps another screen reader? Unless I'm doing something wrong here, I'm concluding that Apple's Voiceover and Adobe Audition do not compliment each other. Really big bummer.

In my radio work, I record one large file with several audio breaks.  Then I copy each individual piece of audio and paste it to another file before uploading it to FTP.  The problem is, the audio sounds bright when I first voice the break and play it back, but once I paste it into another file, it sounds flat and slightly muffled.  Any ideas of why this might be happening? I'm using AE C6 recording with a Neumann T103 with a 286 DBX mic processor and using a Focusrite 2i2 interface and a windows desktop.

Besides Digital - Reaper and Audition - I use Analog tape. Thinking of grounding my Revox PR99 with a modern 3 prong cord. Is this a good idea? Is the 2 prong cord still ok? No noise or hum. All Studio gear is on the same 12 outlet surge protector 4700 joules. 

I have been editing a project in Audition that has video, and at a certain point in the project the video is left on a black screen. It only gives an image when it paused the playback and it is only with a project, do you know why?

We do not support recording when the session sample rate does not match your hardware sample rate.Your current hardware sample rate is: 44100Hz. When I right click the SPEAKER icon and go in to change the system rate I set it to MAX(16/192 for both recording and playback)However when you OPEN UP AA 3.0 and look under Audio Hardware Setupit's frozen at 16/44 with no open dropdown menu to change it. So AA still thinks it's running at 16/44. Second question Simultaneous 4-channel analog recording (from cassette reel to reel or Quad 8 track).The soundcard has a Stereo Front a Stereo Rear and a Stereo Center/Sub input -but when you open up AA 3.0 even though you have cords plugged in and the system(W7 64 bit) set to 4-channel recording - AA 3.0 refuses to budge out of stereo. They gave me 5.5 for free already but I used it twice and threw it out bec it's missingtoo many features from 3.0 that I need to work in the legacy quadraphonic world.

I have a little but annoying problem. While synchronizing audio with video on, the video freezes randomly and then continues but the original audio got unsynch even more thanks to this making it imposible for me to continue working. Is there any tip or tips you can give me to prevent a bumpy playback? Thanks in advance.

Hi everyone!!! I'll explain because I know the subject may seem weird. I'm using Audition 2020. I'm sichronizing audio with video and every clip audition creates for every silence etc you add, is created in.wav format, which by the time you finish your proyect can take up a lot of your hardrive space. On  my last proyect I consumed more than 250 GB of disc space in a two hour video and and had to free up space to be able to finish. As a result I'm wondering: Is there a way to change that default wav format for newly generated clips to mp3 for example?  (I know you can do that by exporting but that would be for the final version and that's not what I want) I hope you can clear my doubt. Thanks in advance. 

I use Adobe Audition 3.0 in Windows 10. I have done single-source recordings for decades, but now windows doesn't recognize my input device. I have a tascam converter to USB. I have used microphones and line output through this device with no problems. Lately I added some plug and play speakers, with a headphone jack to the system.  Now, when I plug in the Tascam, it mutes the speakers, including the headphone jack.When I check the audio hardware setup the speakers are now nowhere to be found, and I have to exit audition and reinstall the speakers. I can get no audio input to the multi-track view, regardless of speaker status...Is either Windows, Audition, or Tascam doing something behind the scenes with my drivers? this makes love multi-tracking impossible. Help!

Audition is shutting down when I try to open recent sessions. Or I just get the spinning ball and have to do a Force Quit. The seesions were running fine but now they will not open. I can open other older sessions. I tried opening the Back Ups of these sessions from my Creative Cloud Files with the same results.How can I find the problem?Read Entire Message

I notice Audition won't open M4A files. Is there a plugin that can be downloaded to make this happen? I suppose I could copy my M4A's to CD and open them that way.... as long as during the copy process no loss of quality happens to the files. Kind of a pain to copy them all to disc and open them as track 1, track 2. etc., instead of the original name of the files.

please can you give audion for free becouse i nt have enough money right now i really need this please please i will pay later on please 

Hi, we've recently updated our audio interface from the Focusrite Scarlett to the TASCAM US-4xhr so that we can host multiple guests on our podcast at once. However when I try to select the inputs in Audio Hardware only 2 appear and not 4! Any advice would be greatly appreciated.

Hello, On Audition, is it possible to separate into two audio tracks (vocal and instrumental) a song already mixed in MP3 format? Thank you.  

I had to install windows 10 last night, A few strange things happened I was able to fix all but one.The tempo on all of the songs has slowed down I can't seem to find where to adjust the tempo, I'm using audition 2018, Really appreciate any help, thanks Rick

‌will Adobe Audition 1.5 work in Windows 10?

I use Auditio 2021 (recent Apple update), and began having difficulty editing. Software doesn't recognize my commands and launches the color wheel. If I continue editing, the system goes through all my commands. By the time I wait this out, a significant amount of time has lapsed. I'm a fast editor paid to perform this service. Rebooting does not help. Any guidance or suggestions. I use macOS Big Sur 11.5 Thanks!

A colleuague of mine is about to share a large Folder of work ( around 70 gB)  more than i have room for on my internal SSD drive. I've tried to move the location of the Folder undo the Syncing menu but when I do I get these error messages. Any help gratfully appreciated...