Audition

Hi Everyone!  After importing some two channelled interviews from a Zoom H5 recording device into Audition, the appears dashed lines in the clipp, seemingly erratically "cutting" the clip (see below). The interviewee begins a sentence and it is cut at these specific places, but without be ever having pressed the pause button, or any other related to the recording. From what I have been able to abduce, the "cutting" happens when I higher and lower the volume for my headphone/listening output on the Zoom device.Though, it does not appear to be this every time. During the last interview, I tried being extra careful as not to accidentially press any other button, but the issue still appeared. Is this some form of function that I have missed, or does anyone have any suggestions as to what is going on? And, can the "cutout" data be recovered in any way? Any suggestions are much appreciated, thank you in advance! Kind regards,Viktor Aronsson

HiI didn't have this problem before but it appeard in my last project. after I'm puting EQ and Compressors and ... on track every thing is fine so far. but when I select Touch or Latch or Write mode to automate the volume level, at the moment I press play, all the track plugins suddenly get reset as though I did nothing on them, all I've done will be perished. except Parametric EQ. I know it has something to do with my Control Surface, because when its off nothing's wrong but when I start to use it the nightmare happens. after this if I even turn the controller off, the bug remains there. the only way that I found to keep my project going is to turn on pre-render button. so this keeps my works on plugins.

Hello, I am an audiobook narrator and a client wants a book shortened (i.e., sped up). There are about 90 separate audio files. Their total length is about 12 hours. How can I shorten the entire audio to make the book about 10.5 hours? Any help, greatly appreciated. And I realize this is probably an easy thing to do. I'm still learning! - Chris

Hello!I am new to Adobe Audition and new at home recording. I am trying to record several tracks for an audio recording that needs to last about 35 minutes. I am in Multitrack and the timeline at the top of the DAW simply stops at 10 minutes and 54 seconds. What am I doing wrong? I hope I am explaining this well enough. Is there a time limit or something on recordings? Help??? Linda

Bonjour,je récupère des omf, mais ils ont été prémixé.Y a t'il un moyen rapide pour supprimer tous les keyframe des différentes pistes son? Merci

After opening any of my multitrack sessions, Audition freezes on "Processing 1 file," and I cannot click on anything. The app says that I have 3.5 GB of space. I have tried clearing memory and additional storage, uninstalling and reinstalling the app, and restarting my computer. I have the latest version of Audition, and it was working fine just yesterday.  Thank you for your help!

Hello, I am trying to export an audio file at 8000 Hz in 8-bit with the CCITT U-LAW codec and a WAV wrapper. From media encoder I can get all of these settings except I only have 8-bit as an option. When I do a multi-track mixdown in audtion, I can do all of these settings except for the CCITT U-LAW codec. What am I missing? I found a similar post on the forum, but they did not seem to have an issues selecting the bit depth. I would prefer to do this in media encoder to speed up the export of other formats and to strip out all metadata.  Thank You!

Hi.How many days by the deadline should my annual Audition subscription be unsealed?Thank youByeA. J. G.

Hello, I'm a beginner at using Adobe Audition and right now I'm having difficulty with some bird sounds in the background. The chirp is very sharp and loud as the it was in the same room as the person being recorded and it can overlap at times with the voice. How do I get rid of or reduce it so the sound isn't as present?

Hi All, This may sound like a dumb question, but how to select the endpoint for an audio. I have a bunch of tracks I placed in multitrack mode and I am done with editing. How do you set the end point after which the audio stops playing? Thanks in advance as I am new to Audition.

hi there, I am a student currently working on an audio piece and I was wondering what the best way to make my atmosphere sound (rain, thunder etc) sound like it's coming from outside. I know it can be done with eq's and mastering but I'm thinking if there is any other way that might be better. thanks.  

Hello,This happened twice already when I was in my multitrack session. This is after the current updates. I am putting together my podcast and the third track, which is Background music doesn't load or show up at all. I do get the first and second tracks to load just fine, but not the third one. What is going on and how do I fix this? This never happened before the latest updates.

Hi. I need to use Audition for my school and can't figure out how to record audio from Safari into my Audition file. Another forum post suggested using Soundflower, but when I went to the page to download it, the application had changed to Loopback which costs $99 after a couple hours of using it. Is there another free application that does the same thing as Soundflower/Loopback?

Hi, I'm looking for a simple quick solution to soften my recorded voice over.  The recording has been done in a studio with a Rode mic but it still sounds a little tiney - can anyone suggest any quick fixes? Thanks, Kim 

Hi,Deadline looming and Audition is not allowing an export to 5.1 format no matter which options I try, though it was working just a few days ago.  I'm on an iMac 2015, 32GB Ram, High Sierra and Audition 13 (not latest OS or Audition updates, I don't want to change in the middle of the project if possible).I have a project set up with 5 tracks and have mixed them all to 5.1.  I want to get them back to Premiere Pro but when I use the Export to Premiere option, I get 6 tracks, all in stereo, not a 5.1 track.  When I try to export with .aac (to import later into Premiere) I get a '!dat' error and a message telling me my destination may not have enough space.  It has plenty of space.  Also, the export gets to 99% and hangs for a long time (like 10 minutes) although it says 0% remaining.  The file seems complete, but opening it shows half of it not there.  Finally, the frame rate suddenly changed from 24fps to 29.97fps without my doing anything and now it

We are working with Audition 3.0 and just yesterday, after recording a track, we tried to save it and rather than the usual dialog box that showed wav file as the default, the file was listed as "L1".  And when you tried opting for another file format, wav files and mp3's were not available.  The file can save as L1 and I can open in my Audition 13 and save it as an mp3 or wav there.  So I'm not losing anyything, but this seems concerning to me.  Can anyone help? Is there some setting that they might have switched? Thanks.

I used to have a very handy favorite mapped out with a hot key; when I selected an area it would time shift it to 60% of its original length and reduce the amplification. The result was that loud intakes of breath were shorter and quieter. I found this better than removing the breath entirely in some cases.  It was lost in some migration to Audition 2020 and now I can't rebuild it. Super irritated. Thoughts? 

When I commence playback, either through the key command on the bluetooth keyboard, the onboard key on the laptop, or on the 'play' button on the app interface, I get a loud pop.  Every time. To reiterate, every time I begin playback there is always a loud pop. 

No se escucha, aunque los ficheros de audio están ahí, y no se mueve el sonido al lado de la línea del tiempo, como si se hubiera bloqueado

Hello, just moved to Audition from other software and mostly it's working well.I'm recording multitrack using a Dante card in a Yamaha LS9 board. All of that works very well using 10-12 tracks. My issue is that I'm not doing my editing and mixdown connected to the board, just use a set of headphones. So each time I go back to recording I've got to remap each track to the Dante channels. I've tryed making a templete and reload that each time I connect to the Dante card but Audition just doesn't seem to remember the mapping. What am I doing wrong? Any suggestions would be appriecated. 

So I just got a brand new computer, and I've used Premiere several times on the new machine without a problem, but diving into my first project in Audition, I'm running into a very odd problem. Every time there's a transition between two audio clips in Auditioin, there's a strange digital pop in the preview. To be clear, this pop doesn't seem to be present in the audio itself (e.g., artifact sounds bumping up against each other in the edit). It's just the same digital snap/popping noise in between every two clips. To test my gut feeling that this was something in Audition preview, I exported the audio, and sure enough: no clicks. It's almost like the Audition preview screen can't keep up with the audio it's processing, and those are "thinking clicks" or something. I've been editing the exact same kind of audio for several years now in Audition, and I never ran into this on my old computer. Any ideas for a hardware setting or maybe processing speed setting that I could tweak to imp

Hello, Really hoping someone can help!I'm using Audition 4.0. A few months ago I noticed that when I'd save my WAV file (after downloading from my recorder) the file would be corrupted when I opened it again. Luckily I still had the original on my recorder and edited it using a different program. However, I am now having this problem again to a greater degree. I open the file from my recorder (which is plugged into my iMac) and it plays fine. I then save the file to a folder on my computer. This file is then saved as a corrupted file. As in, when I play it back it repeats a section over and over, there are crazy sounds, it's jumbled. The strange thing is that one of the files (the most important one) was saved and playing correctly a month ago. I've been editing it and pulling sound bites from it. I've since deleted the original one to free up space on my recorder. And then today, when I went to open it to continue putting my piece together, it was corrupted. Furthermore, a few (not al

Hi, is there a way to repair an audio file with lag/glitch that is probably caused by internet connection issue in Adobe Audition?I joined a file so you can hear a sample of the trouble.Thank you in advance for your help.

I am trying to figure out how to fade in on multiple parts of a Waveform on a Podcast Voice Track.There are lots of times when I and my guest will say "Um" or "Ah" and quickly say the word we were supposed to, so you can't just silence the Ums and Ahs on all occasions. I need to be able to fade these in. What research have I done so far to fix the problem?1) Video - This Fade In and Out Envelope only works at the beginning and end of a Waveform. You can't have multiple Fade Ins within the Waveform: https://www.youtube.com/watch?v=N8c1cTF71vI2) Audition Forum - This answer seems to be a written version of the YouTube video above. I can't figure out if this is the correct answer because there are no screenhots or videos: https://community.adobe.com/t5/audition/fade-in-fade-out-on-selection/m-p/10373323?page=1

Is dvaaudiofilterscan still used in Audition CC (2020)? I just want to know if I still need to allow incoming network connections to it. Thanks.