Audition

My apologies for asking such a stupid question, but I am new to Audition and have never seen such a cumbersome interface in my life.  I have used Logic, Audacity, and ProTools and things like setting In and Out points, and trimming to a selected region is all extremely intuitive and straightforward.  But for the life of me, I cannot figure out how to do any of that in Audition. If I select a region of a track, the "Trim to Selection" is grayed out.  The closest thing I can find to In and Out markers are "cues", but I have no way of knowing whether that is the same thing. I have watched and read some of the introductory tutorials and even searched for "Trim to Selection" in the search bar, but I have yet to find anywhere that describes how to do this most basic editing function. I feel like an Olympic runner who is asking someone to help him tie his shoes by asking such a dumb question, but if anyone can help, it would be much appreciated. 

I felt like adobe enhance speech just ridiculous , can make a bad audio turns to good... i wondered how i can make my own quality match like enhance speech from adobe using adobe premiere pro or audition, so let me know guys if you have some advice or settings, just drop in the comments, Thanks

Every time I open Audition 2025, the panels in my workspace resize. I have to then reset them to the appropriate size I work with each time I open the program. Then when I close and re-open the program, I have to repeat the process all over. Audition Version: 25.0.0.47Platform/OS: Windows 11 Pro 64-bit

I'm been using Audition to open Premiere projects to be able to view the exact timecode my cursor is on. This method has been working perfectly, however recently I've been having an issue with the right channel being muted on a stereo track, and no way to click it back. This only happens in the waveform view, multitrack view plays stereo fine.Adobe Audition 25.0.0.47Macbook Pro, M1 Pro, Sequoia 15.3 Update: this issue is happening in the most recent beta version of Audition as well.

I have a long list of single words separated by silence that I want to auto-split into sound files.It appears that at some point, Audition could do this, using Auto-Cue, but that the functionality might have been removed as far back as 2012 and has never returned: https://forums.adobe.com/thread/1109366Am I wrong? Is it there but I'm not seeing it? Or do I really need to jettison Audition in favour of the free Audacity?https://manual.audacityteam.org/man/splitting_a_recording_into_separate_tracks.html Cheers,Minty

 Hi, I hoping someone can suggest a way to use Audition to salvage the audio on a few recordings I made of a solo music performance this weekend.  Somehow, the audio for each of the five short videos I recorded ended up with the narration from the Audible audio book I'm currently listening to embedded on top of the music and vocals.     Is there any way that I can use any of the noise reduction/restoration effects, or any other Audition tools, to isolate and remove the audio book track?    Obviously, I can access the audio book narration itself (from Stephen King's '11/22/63...') to create any noise prints or samples needed.   Thanks in advance for any advice ! These are sort of irreplacible tracks. 

I have a problem you guys may or may not be able to help with.I bought a 2024 Mustang that had the B&O sound system in it and while it sounded okay it did not sound as good as the aftermarket system I had in my Lincoln LS.As a result, I had the system replaced with new amps and speakers and went top of the line. I am a 66 year old Doctor so it isn’t necessary for me to say how much the upgrade cost but it was all Focal Speakers and top of the line amplifiers. Here is the problem.I bought the Mustang before I sold the LS and there was no comparison between the LS system and the Mustang Factory B&O system.Before I sold my LS I put one of the Service people at the Dealership into each car playing the same song and asked why the LS sounded so much better than the Mustang B&O system. He told me Ford deliberately had the Mustang stereo roll off the Bass because they didn’t want to be replacing speakers under warranty constantly with people blowing them out playing Rap M

Hello, thank you in advance for reading this. I am new to using Adobe Audition for recording voiceover. I recorded two sessions using the waveform editor and they sound great. My third session I recorded in the multitrack editor as I wanted to test the function of listening to playback while recording (although I didn't end up using it), and as far as I can remember the audio sounded equally great as my other recordings when I played it back. Now as I'm sitting down to edit the files, the recording sounds quiet, hollow, and tinny -- of a different quality than the other audios that I recorded. The only thing that I did differently was record in multitrack as opposed to waveform so I imagine that is the source of the problem. Everything else was the same (studio recording setup, microphone, mic technique, etc.). (It's not just a playback issue either, as I've exported the audio in wav and mp3, and when played in other software the sound is equally poor. I have raw files f

I am trying to figure out how I can change the media & disk cache settings for all users on Mac to the same folder where they can all access the same session template. The problem I am facing is that the media & disk cache settings for each users are defaulting to their individual adobe document instead of a share network adobe folder. How do I change the media & disk cache settings for all Mac users to default to a shared folder instead of their individual documents?

Hello, Sorry if this is a repost, but I couldn't find ANYTHING. I cannot get Audition to simply record my audio- not even from built-in input. I've made sure my sample rate is the same throughout, I made sure everything is connected, and I made sure the computer itself recognized the audio. Any idea on why I can't even get the meter input signal to show anything? Thanks, Nick

Hello there.I was wondering if someone could help me.I am recording an audiobook and i was editing after recording a 30 min chapter. at around the 6 min mark the audio completely changes and sounds electronic and corupted, like theres a second buzzy voice under the main one as well as a bunch of clicks and this persists for the rest of the recording. I have no idea why this is happening, the recording is fine before the 6 min mark and nothing was changed in the hardware or software settings.I also definately did not move any plugs and the issue is still there when I export it into a wav file.Many thanks.

All of sudden I cannot zoom in or out on the either the multitrack or waveform timelines.  This is wtih the on screen buttons, keyboard and mouse wheel.  I can't fathom what's wrong here.

Mon ordinateur n'est pas compatible avec les nouvelles versions d'Adobe Audition. Existe-t-il une solution ?

I am able to remove any other audio file but I am unable to remove this one. The blank space is present while listening to it so I cant ignore it. 

Is it possible to remove a louder voice from a video. I have audio from a crowd but I someone is yelling and drowning out the conversation. Can I remove the louder yell? Or is this just not possible?

For my job I record the audio off of a youtube video into adobe. I usually do this by using the stereo audio input and then recording while playing the video. However, for some reason the audio input stereo is no longer an option. Do you know why it would have dissapeared and how to get it back?

 I am not sure what happened, but adode now has three different segments on it now and with it being like that I am unable to edit things. It does not allow me to view specific parts of the recording. It only lets me listen from the very beginning of the recording. It also will not let me make any changes. I have uploaded a screenshot of what it looks like. I have tried everything that I know to do but can't seem to fix it.  It also is no longer  giving me the option of stereo for the input. Which is what I use to record audio that is playing from my computer from a video. I have been working on trying to fix it since yesterday and cannot figure anything out. Please let me know if you have any suggestions.

 I generally edit with Audition windowed on my external monitor and not on my laptop screen. Didn't have any trouble when I last used it, but now if I am editing on my external monitor, I am unable to drag and drop files from the files window into batch process or match loudness.If I move the Audition window back to my laptop screen, I can drag and drop with no issue. I tried it on other monitors and it also didn't work. I am able to drag and drop other files into other programs windowed on the external monitor. I can drag and drop files from Explorer and into the Files window while it's on the ext monitor.Can you help?   This is for Audition v25.0.0.47Processor AMD Ryzen 9 5900HX with Radeon Graphics 3.30 GHzInstalled RAM 32.0 GB (31.9 GB usable)Edition Windows 11 ProVersion 24H2Installed on ‎12/‎17/‎2024OS build 26100.3037Experience Windows Feature Experience Pack 1000.26100.48.0

I see in Adobe Audition i can import .m4r files... How can I export in .m4r? Under the Format in Export, File,  the Apple Audio Toolkit lists it as a exportable format, but doesn't show the preset to do it. Help! (Adobe Audition CC 2017)