Audition

I have begun using Audition in a more serious way, and have a question. Recently, I recorded my first, lengthy podcast (in which I am the only speaker), and discovered that, apparently because I hit the stop button rather than pause, Audition created 25 separate files comprising my (intended) single podcast.   I understand I can stitch them together, but I feel that will take too much time, and it is better to be recorded.  Here are my four short questions about punch and roll: (1) If I plan to record a single podcast episode of 10 or 15 minutes, and of course anticipate speaking errors that will require correction, should I start - and stay - in the punch and roll mode?  Or start with instant recording, and switch to/select punch and roll when I need to correct something?   Is there a benefit to starting and staying in punch and roll, versus switching to that mode on the fly only for individual corrections?(2) If punch and roll allows editing so

Hi guys!I´m recording audio for a course and Im having a really annoying problem. Everytime I send an audio into a multitrack it pastes randomly. I can´t get it to paste specifically where I want to. Right now, I have to go back into the track and find it wherever it is and then put it to its correct location. It´s driving me mad. Help!

I have already paid for adobe auditon and I am a student and it is telling me I have to pay for it again when I paid for it last night.

I am trying to download an older 32 bit verson of Audition on a new MAC 64 bit, it says the installer need updating, anyone know a work around to get this done   

HI. Probably a stupid question..  On my single (wav editor page) editing page, I lost the tabs for cutting/razor, the arrows and would like to get tht back on my default edit page. I also lost the multitrack tab so I can easily go back and forth from single wave edit to multi tracks  How do I get that back onto my settings? It was at the top left coner, and now its missing.

I have some recorded audio that has a reoccuring popping/knocking sound throughout. Is there any way to remove this? I have tried using the DeNoise effect as well as the Parametric Equalizer effect to no avail. MP3 file is attached. Any advice is appreciated. Thanks.

Am I missing something obvious? The amplitude control slider is not turned on in Audition.  Therefore I cannot adjust any sections for amplitude.  Help...

Hi, Community!Can anybody help me with the topic?Maybe somebody knows the difference in plugins scanning method in these two versions of AAu?Plugin is seen and works properly in AAu 2018, but no attempt from AAu 2020 seen  even to load it. ( my logs analysis)Plugin is qute legal and not included to any of blacklists.Any idea would be appreciated.Veronica

Audition has been working without any issues since I installed it 4 months ago. Recently, it has started to freeze every 5 minutes or so. This happened prior to any system or software updates. I updated the software two days ago, but that did not fix the problem. Windows rolled out an update yesterday sometime but that has not fixed it. I have uninstalled and reinstalled and that has not ifxed the problem. I have plent of disk space, i7 with 48 GB RAM. HELP!! I am in the middle of a project and am getting nowhere fast..Thank you

Is there a way to increase the size of the readouts in the Selection/View window?

First of all, I'm new to this forum but have read many replies over the years on Audition, which I have used for many years.  I have Audition CS6 (I know it is no longer supported) but have been running it successfully on a Mac Pro OS 10.13.6, which I upgraded some time ago.  No issues...but on 3/31/2020, I ran a couple of Apple Security updates and the next day, I tried to use Audition and it wouldn't even open up. I'm not a computer wizard so some of this code is a little new to me.  Any suggestions would be appreciated...thanks for your patience...The beginning of the error report is below:Process: Adobe Audition CS6 [1140]Path: /Applications/Adobe Audition CS6/Adobe Audition CS6.app/Contents/MacOS/Adobe Audition CS6Identifier: com.adobe.Audition.5.0Version: 5.0x708 (5.0)Code Type: X86 (Native)Parent Process: ??? [1]Responsible: Adobe Audition CS6 [1140]User ID: 501Date/Time: 2020-04-04 18:07:04.580 -0500OS Version: Mac OS X 10.13.6 (17G12034)Report Version: 12An

I have a vocal track that is only a little off every here and there. I plan on using Auto Pitch Correction, but the one issue is that there is a pitch modulation in the middle of the track. If I cut the track before the modulation, highlight the portion with the pitch issues, and apply APC from the rack, will it effect the whole track, or just the part of the track that is highlighted? Can I apply one instance of APC to one 1/2 and another to the other half?

I am starting to write songs with my sister but I don't have a proper software. If I were to get Audition, would I need attachments like a microphone, instruments, etc. or do I just import files from my phone? Can I import files from Voice Memos on my phone?

Working with 40 minute chunks of audio, it would SAVE the file in about 15 secondsNow it takes more than a minute just to SAVEAnd that's after I updated itWhy would it be going slower after an "Update"? 

HiI started working on a PR file by dragging in into AU, it shows all individual, sperate tracks perfectly. But when I save the file in AU by "file -- export -- export to adobe premiere pro -- with 'export each track as stem' ticked, I got an mixed down file.Is there settings i can change to make Audition save it as a file with all tracks sparated, and can be edited individually? Thanks

I use CS6. I am digitising some old vinyl and noticed after I had done a few that my record player was running a bit slow (c. 1.8%). No problem, I thought, I'll just use the time and pitch stretch process in Adobe Audition to get it back to normal. Specifically: Effects> Time & Pitch> Stretch & Pitch (process). I have set the Stretch to 98.23% and locked the pitch to the stretch, which should drop the pitch by 0.31 semitones. Unfortunately not that simple. After the stretch, I notice most of the waveform seems to be in Clipping. So I checked using the Amplitude Statistics. The average RMS amplitude before and after are very similar Before:14.16L, 14.47R After: 14.28L 14.55R. However, the number of possibly clipped samples has gone from 5L, 75R (a few more than I would like, but not worth re-recording) to 17921L, 17337R. What is happening? Why does time/pitch stretching affect amplitude at all? How can I stop it?

Has anyone being able to configure a nano kontrol 2 from Korg as a control surface on Adobe Audition?When first pluged on my usb the korg, adobe would read it, but wouldnt work anyway, so I downloaded the drivers from Korg, and now that I have intalled them, Adobe won't even see the nanokontrol, I try to look for it on the midi entrances on mackie control configuration but is not there :C Can Anybody help me with this?

Hi, I am using Adobe Audition CS6 in Windows 7 (not interested in upgrading to Windows 10 or to CC at this time) I want to use the Korg Nanokontrol2 in Adobe Audition CS6 along with the Focusrite USB interface.  I have the Focusrite USB interface up and running great, but I can't get the Nanokontrol2 to work in conjunction with it.  Can anyone provide a walkthrough?

Problem with aptitudes marker adjusteing manually 

So I started a multitrack project in Audition and I was doing a bunch of editing without any issues, and I saved and closed the project. I later reopened the project, and suddenly the playback is slowed and REALLY low-pitched. It sounds like the audio is lagging slightly behind where the playhead is on the project. I have reopened Audition several times and this issue is persisting. I have no idea what's going on. I don't know if it's an issue where somehow something has changed with the sample rate, but after looking at the .sesx file in a text editor it's definitely formated to 44100 hz and all of the audio files are also in 44100 hz. Would really like to fix this instead of starting all over.

When I use Open Append> in Audition and select consecutive clips from a CD that plays without gaps, there is audible sound hiccups where the track breaks had been. I'm a beginner so thanks for explaining it simply to this computer savvy but non-sound engineer. Is this an automatic crossfade issue? Details: I'm using Windows 10 Pro and trying to combine an accompaniment track for my choir to record with. The CD I'm pulling from has the song broken into short clips that correspond to specific measures in the sheet music. 

Hello Audition Community,My apologies if this is the wrong place (please advise where or another place?) to post but I have a bunch of questions and need assistance mastering and using audition and wondered where I might post to hire someone for a few hours of zoom support to be able to "talk" with many of the experts on this community or if you had any other suggestions.  Thanks for your insights, dakota

I am using a Audient ID14 with Auditon and I want to be able to use both channels for mono audio.  Right now I can only use the left channel for mono.  When I look at the audio channel mapping it shows the L as mono but not the right.  How can I change this?  I want to be able to use both XLR inputs and record the audio on both channels based upon which one has the phantom power applied.  Currently I can do that for the L side but the R side has really low volume.  I am trying to find the correct settings in Audition to do this as it surely has to be possible.

Hello.I have to realise a podcast interview with Audition.I record my voice with my mike, and i want to record -at the same time- the voice of my guest (in Skype, Facetime, Messenger or other). Is it possible ? And if i just want to record a sound from my computer (vidéogame, conf call...) how can i do it ? I think it's possible with Audacity, but not with Audition ?Thanks a lot for your advices

I have been notified by a friend that Mac's new OS 11 is about to drop and that some Music software may not be compatible in the 64-bit world. I am a subscription Audition user, so my Audition is current. Is my Audition subscription going to be compatible with OS 11? Please advise...Thanks!