Audition

Hi, I have recorded a skype call for a podcast but I have made a huge mistake. The audio is recorded twice on the same track, one with latency. Which means that I have now  an audio recording of a conversation with huge amounts of echo/reverb. I tried removing it by using Adobe Auditions DeReverb. It is unable te remove it. Can anyone plesase help me? Kind regards, SangarEye

Hello.I am looking for some help.Currently in Adobe Audition 2020, I have a multitrack sessions, with 2 tracks in each multitrack that play only out of the left speaker in the multitrack, yet in both speakers in the waveform.  This is not the case for other multitrack sessions.  Over the past week I have conducted 2 interviews.  The first of these interviews recorded and had playback in Audition via both speakers; it worked perfect.  Then an interview resulted in this left only problem.  I assume I inadvertently altered a setting.   My set up for the recording is this:  Mac Book ProAdobe Audition 2020No mixerSimple stereo with 2 speakers connected to Mac from headphone jack on Mac to back of stereoZoom H5 connected to Mac via USBHeadphones connected to Zoom H5Mic 1 is mic attached to Zoom H5, on top of Zoom H5; this is guest mic pointed at speaker to pick up guest Mic 2 is mic attached to Zoom H5 via XLR; this is my mic on a boom  Guest

I'm working on several 60sec spots and the client requested that all deliverables end right at 60sec. If I cut my music precisely at 60sec in Audition, the music file ends short in Premiere Pro at 00:59:23. If I cut the music file in Audition to 1:00:10, it will end perfectly at the 1:00:00 mark in Premiere Pro.  If I create the timeline by dragging in the music file first, the music ends at 00:59:28. If I drag the music file into a timeline that was created by dragging in the mp4 first, the music ends at 00:59:23. I figure it's probably important to note that my mp4 assets are 23.976 at 48k Hz. The music files are sampled at 44.1Hz. Both Audition and Premiere Pro audio hardware settings are also 44.1k Hz. Has anyone else here experienced this issue?

I used to do a lot of video editing way back when and I really liked subclipping to help label and organize media. I also like how After Effects allows you to create compositions and nest them within other compositions.   Is there anything like that in Audition? I'm looking to do some podcast editing but I can't seem to find a good way to organize anything like subclipping. Am I not seeing something? How do people edit longform podcasts?

Using time and pitch even to speed up a piece by 1 second, the audio becomes machine like and loses the original sound. At work, it does not.  Is there a fix?

Hi guys, Trying to make more clear / increase the volume of a voice in video recording which sounds very low/drowned out when music is playing in the background. Suggestions please? Thanks in advance. 

i just installed a new cpu and motherboard/graphics card. and now im getting random crackling and popping during playback. i use to have this issue before, but only when i was in a heavy intense cpu usage mixing session. so i would normally just put my buffer rate at 2048 and i wouldnt have the problem anymore. currently its set at 2048 and im still getting the crackling and popping here n there during playback. im mixing the same session, so its not like theres more plugins being run. and i upgraded from a ryzen 5 2400g to a ryzen 7 3800x as well as an added graphics card to make the new ryzen work.im running windows 10 with this:RYZEN 7 3800XMSI X570 GAMING EDGE MOTHERBOARDNVIDIA GeFORCE GTX 1070    graphics card ALSO INCLUDED A PICTURE OF MY COMPUTER SPECS

I'm looking to get a new Windows machine. I want Adobe Audition to love it. I want to be able to run session with loads of tracks and loads of effects and not have my machine studder when I do. This is what I'm working with now. Here's what it looks like in Task Manager while I try to play back a large session which the computer cannot do smoothly without studdering the whole time: I want a real powerhouse. Any recommnedations? Not only on particular componants but not manufacturers, too. Who should I go to build me a sweet machine that will work effortlessly and reliably for years to come?

I own Adobe Audition 5. It's always worked perfectly the few times per year I needed it but now I can no longer open the software. It appears I'm forced to buy the latest CS version. I own a late 2018 Mac Book Pro and run the latest OS.  It's expensive based on how little I will use it. What are my options? Thank you,Richard

I tried to record myself recently and for some reason, the audio just came out messed up, like REALLY messed up, it was glitchy and distorted, it never happened to me before. I'm using an AT4040 condenser microphone and a Focusrite 2i2 audio interface,does anyone know how to solve this problem?

HelloI have several hundred lectures from 1970-1990 all recorded on cassette tape. I am converting  these assets to digital. On most I am able to clean them up using any and all of these: normalize; noise reduction by 70%, reduce by 7db; parametric equalizer, hard limiter, multi-band compressor. The lecture talk  presented here I am unable to make any useful noise reduction. Though I judiciously apply noise reductions the audio is less than listenable.  Sometimes I start with normalize then noise reduction. Then again I may start with noise reduction than normalize – and a few other attempts using other tools. I am unable to achieve a good sound. Please give this audio a listen to and let me know how I may be able to reclaim Don’s conversation. It is an important talk from 1981. Let me know if there is a working fix.Sincerely and with Gratitude

I know you can apply a fade curve to the beginning or end of an audio track but what if I want to smooth from voice over speaking to silence between sentences mid track? Any tool for that?

I've recently started reading lists of student names for (virtual) graduation ceremonies. I have to leave about 2 seconds of silence between each name, and while I'm pretty good at doing this when things are flowing smoothly, there are a number of times when I have to pause longer to read over a tricky name or listen to an audio file of the name or do some research, meaning that the silences can range from just over 1 second (occasionally I get going a bit too fast) to 30 seconds or more.So my question is this: is there a way to get Audition to automatically find (relative) silences of anywhere from 1-60 seconds in a track and automatically replace them with silences of 2 seconds? It would save me a lot of time if I didn't have to do it manually.Thanks,Brian

I stupidly cut up my audio (Audition) and reordered it before editing the volume. Is there any way for me to edit the whole original piece (I need to up the volume and remove background hissing) without having to do the same for each individual cut? Thanks.

Bonjour, prévoyez-vous d'autres apparences pour ADOBE AUDITION ? car je vous avoue que ça manque un peu de diversité, tout est un peu similaire et à la longue ça fatigue vite, on est plusieur ici en studio a être de cet avis.   merci pour votre retour   [email address removed by moderator]  

I have this strange problem that does not allow me to correctly view the program, with no other software I have this problem, would you know how to fix it?   

Audition (and audio, in general) newb here.  I'm making a short film that consists of two actors whose dialog is applied as voiceover to a shot of an electronic instrument they're using in a lab.  The instrument is all that's shown as we hear them discuss what they're measuring.  I have very clean audio of both actors and have applied it to the video, along with sound effects for instrument fans, room ventilation, button presses, etc., but the audio is so clean it still sounds ... unrealistic is all I can say; like it was recorded in a soundbooth, as, indeed, it was.  I'm sorry if this isn't clearer; as a newb I'm unfamiliar with the terms.  If you understand my problem, is there a fix?  Some sort of filter or effect I can apply in Audition?  I've completed the Lynda.com Audition Essential Basics course, so I know my way around the program, though I'm far from an expert.  Thanks for any tips.

I have a track that I "mixed" with insertion of sounds and voices some time ago, using Audition's predecessor, Cool Edit Pro.   Since I lost the original sound/voice files, I want to extract them from the mixed track.   I have the non-mixed music track available. A couple of tutorials mentioned you can create a multi-track session, using both tracks with the original music track "inverted", mix them and that should do the trick (ie: the inverse should cancel out the music itself).   Unfortunately, that does not work.    How can I accomplish this with the above resources? 

I am on AA CC 2020 newest version.  Mac.  While recording with punch and roll in waveform editor the last sylable or part of the word prior to my punch in point is inserted upon recording.  For example if I say "Test one two three" and punch in after "three".  "ree" audio appears at the end of the sentence after my punch in point.  I've attached an so you can see what is happening.  I have uninstalled and re-installed audition with no change.  Please let me know whey this has started happening. Thanks!Tristan  

I am doing a final run through of my podcast. But I need to go through it and remove plosives. So I open a project(session?) in Audition, I import my audio file, and I begin removing the plosives with the effect to remove mic vibration. So I begin removing them and then I have to stop. So I save the project(session?) and close it. When I have time again I want to open the project and continue removing plosives from exactly where I left off. Then save and close. Then continue by opening the project and continuing where I left off, until I have finished the entire podcast.    But this is not how Audition works at all and I can't figure out the workflow to accomplish the above scenario. Is there a way to do what I'm trying to do?   [Moved to a thread of its own - Mod]

Does anyone use OneDrive? I am having real issues with syncing Adobe Audition and OneDrive - wondering if anyone uses these two together?

I am usingAudition CS6 which is  on my MacBook Pro / 13 Inch Mid-2012/ High Sierra 10.13.16.  The program stopped launching a week ago.  I can only launch Au CS6 when in Safe Mode.  Adobe Customer Support will not provide support and sent me to this forum. Crash report is below... I hope someone can help me as I make my living from using Audition.  (I do remember running an Apple Security Update a day or two before, if that helps...) Exception Type: EXC_CRASH (SIGABRT)Exception Codes: 0x0000000000000000, 0x0000000000000000Exception Note: EXC_CORPSE_NOTIFY THANK YOU in advance for your help! 

Hey,I use Adobe Audition to record an audiobook, edit my audio tracks and individual files. Now I am on the verge of completion and have come across the following problem:I have to create a kind of table of contents/ contents in which you can jump back nad forth between the chapters. This playlist must be playable by all standardized mediaplayers. I have already created a playlist with corresponding markers within Adobe Audition. Can I get this configured?I am looking forward to now useful advice.Greetings from Germany,Nadine

bonjour, Je ne parviens pas à configurer correctement les paramètres d'enregistrements, car je ne m'entends pas jouer quand j'enregistre, et cela vous pouvez le deviner, me pose pas mal de problème. avez vous la solution ?

Hello, first time posting here, thank you for reading and thanks in advance for your help! I am an audio engineer working with a video producer on a series of videos. He has been working in Premiere and is familiarizing himself with Audition, so I recently downloaded and am finding my way around Audition as well, for ease of collaboration. I do not have a subscription to Premiere. My version of Audition is also a slightly earlier release than his, as my computer OS is older and Audition will only update to 12.1.5.3 for me. So far, we have a very clunky workflow. We've found that he can open his Premiere projects in Audition on his computer, but I can't open his Premiere projects. I assume this is because of the version discrepancy, but I could be wrong. I can open his Audition session files, however, so here's what we've been doing:- He opens his Premiere project in Audition on his computer- He saves that as a new Audition session with all assets in a folder- He uploads all t