Audition

This is a gratuitous post, maybe. But, it is rare that I encounter something new that is of fundamental importance. I just learned that you can edit the spectral display with a mouse... Holy cheese! I'm stunned. Incredible.

Hi, When importing OMFs or AAFs into Audition, they are brought in as dual mono. I would like to work with these files in stereo, whilst keeping any existing keyframed data from the OMF. This is possible in Pro Tools, as the dual mono clips can be dragged into a stereo track with the keyframes still present in the new stereo track. In Pro Tools you can then make adjustments to the stereo track without having to adjust both the Left then the Right separately. This is important as I would like to receive OMFs from the video editor and build upon the keyframes they have already made (and not start from scratch). As I understand it, I have 3 options but none of these are satisfactory. 1. Pan the two mono files left and right on the track sidebar, and group the clips - yet this means if i wanted to adjust the keyframes, I would have to alter them on the left and then the right which is tedious and time consuming. 2. Pan the two mono files left and right on the track sidebar, and then send t

hello,i want to record the Reason Software in Adobe Audition but i dont understand why there is some latency while recording.when i dont record in audition, theres not latency in Reason.why it doesnt record live?can you explain me ?thank you very much

after updating adobe audition 2017 to 2018 noticed feed back when  we play back music while recording is on in multi track mode. In waveform mode we can play the music while recording is on. in 2017 also we do not hear any feed back. how to correct this fault.palliyagurusri lanka broadcasting corporation.sri lanka

Hi,I was given a video that was shot with a cellphone. I could understand what's being said but the audio seems to have that "underwater" sound to it.  It's much like when you call a radio station and your radio is turned up high that there's feedback or like an echo.  Is there a way to remove it using Audition CS6 or any Adobe Product? Highly appreciate any ideas.  Thank you!Regards,Jo-Ann

I thankfully have them all saved to my hard drive but I thought the point of having the cloud was so I wouldn't lose my files.  So when Creative Cloud did it's automatic update ALL the files that I had saved to there were gone!  I did not actively delete them nor was I given a warning of their deletion.  Is there any chance that these files are retrievable, and how likely is this to happen again?

I recently updated to audition 2018. When I use the icon to start it says configuration error please uninstall and reinstall. When I start it from the Adobe menu in the desktop app it works fine. I am running High Sierra on a mid 2015 macbook pro with a core i7 and 16 gigs of ram. HD is pure ssd.

Hallo, ich bekomme einen Echo bei jeder Aufnahme. Die Lautsprecher sind während der Aufnahme abgeschaltet.Welche Einstellungen sollte ich vornehmen  ?Vielen Dank im Voraus --> Audition CC 2018

Does anyone get this problem?

I made several shorts of a classic aircraft making low level passes, it was so low and loud the soundtrack clipped (looking at the envelope)I don't mind that, as even clipped 4 x Merlin's sound amazing, what I do want to improve is the two viewers in front of me yay woo ing over the Merlins.Canon EOS 5D MKII and Rode stereo video mic worked really well. I'm an absolute beginner with Prem Pro but getting to grips with it.Does anyone know of a method of cutting out the speech from a sound track, effectively erasing that part, I am sure this is possible but don't know how.Nothing against the cheering but I really think the engines should be clear of comment, Happy that then end of the clip spectators clap but would like to take out the spurious cheers.Any suggestions?

How do I add Cart Chunk data to wave files using CS5.5. Need for radio automation (Rivendell). Have Metadata RIFF but nothing fills the Cart Title needed for Cart Chunk. Thanks!

I use a Mackie Big Knob Studio monitor controller to switch between headphones and monitors on a 2013 Mac Pro.The Mackie BKS controller is a USB plug and play device. It just works... or did.I updated to High Sierra (unwittingly) and discovered that my current setup no longer works. The Mackie USB still shows up in the Output/Input list in System Preferences/Sound/ but, selecting it does nothing. No sound comes out. I do get sound if I use the default system sound.I realize this isn't exactly an Adobe Audition problem... but, I was hoping someone in the Audio Engineering world has either run in to a similar problem, or is willing to help me out.Mackie's forum is non-existent—but I don't believe they caused the problem. I posted on Apple's forum, the agency responsible for the problem, but haven't heard anything back.I really prefer the Adobe Forum community, so I'm hoping someone else here might have some insights on this.

Since the update to CC2018, every time I normalise an audio clip in PP (to say -12db), prior to editing the multitrack in Audition, on opening Audition I get a warning to say I'm trying to use a clip set to more than +15db and that Audition needs to mess with it to take it down to +15db.Once it's then open it plays absolutely as normal.I'm sure I'm just being dumb somewhere, but can anyone explain this, or is it a bug?The audio in question is recorded on my Sennheiser radio mics, with the sensitivity set to -30db. I then have to normalise the clips up so that they are audible without putting my amp volume up to 11.Computer is MacPro 5,1 6core 3.33GHz, 48GB RAM, GTX680 Mac GPU, OSX 10.13.1 (High Sierra), Adobe CC fully updated to latest versions. My Mac is very solid and High Sierra is working very well for me.Thanks for any suggestions.Dominic

I use a Focusrite Scareltt 2i2 Second Gen to connect to my MacBook Pro.  Before I updated, I could record in multitrack with no delay in my monitoring.  Now it's unusable.  When I change the buffer settings it gets better but not much.  Is there some option I am missing here?

So, I searched all over online for answers and then for forums, and this is the only forum that appears to be active that may be able to help me out. It's related to Cool Edit Pro 2.0.I've been using CEP since 2003 (yeah I know, time to upgrade. I have, but I always go back). I've never run into this problem before.I got a new PC recently, and had my guitarist come over this weekend to get some tracks recorded. The session plays perfectly fine, but when I hit record, it'll record, but wont play any of the other pre-existing tracks. Nothing is muted or solo'd. It literally doesn't even show music playing down in the monitor level section. But when I'm just playing the music, it's fine..At first, I thought maybe it was a Windows 10 problem, but then I remembered I recently recorded my singer on my laptop, which also has Windows 10. So I don't know what the issue is.Any thoughts?

I’ve been searching for an answer to this problem and can’t seem to locate a solution. I do a lot of podcast editing in CS5.5. When editing a Multitrack audio, the file often times switches to Waveform when I left-click the mouse. This has occurred when adding a splice, and, when I attempt to click and drag an audio clip. Sometimes, it takes several attempt to perform this task in a Multitrack screen, without it bouncing to Waveform. Any idea what causes this and how to make it stop doing that?

I am missing the FFT filter window - i frequently used it, but now it does not pop up anymore when I click to get it.The border (I'm on Windows) does highlight, or even blink, to indicate something else opened / moved focus to another window. Nothing happens.I can still open other windows such as the Stretch And Pitch effect window...What can I do to get it back?

What is the best way to import RED Camera footage into Audition?  I only want to work with the audio and I am not an experienced editor!  I'd like to skip Premiere and just work with the audio from the Red footage in Audition. Any help is greatly appreciated!

Hi guys,I have a major problem with my recorded audio file. I uploaded my MacBook last week and my recordings on audition was lost when I opened the program. I tried to find them, and eventually did, but I can't open them. What's the problem? It looks like this:

To all the german Speakers!hey Leute, bin nicht so gut in rechtlichem Englisch. Ich hab mir gerade das Adobe Audition Portal angesehn, da sind gute Soundeffekte dabei, kann ich die für alle Produktionen verwenden?Gibt es auch normale Talkover?lg und danke für die Hilfe!FLO

He venido grabando en el Audition, pero hoy me encontré con un rótulo que indica lo siguiente: Las velocidades de muestreo del diseño de entrada y salida de audio no coinciden. Aunque he venido grabando desde hace mucho y sé usar el programa, aunque reconozco que solamente lo básico que he necesitado, (grabar voz, editar y musicalizar), pero no entiendo de computación y por más que he tratado no he podido encontrar solución a esto.¿Me podrían indicar que debo hacer por favor?

Hello everyone,I have set up a favorite a couple of months back. Amplify   --->   -o.3dBWhen reactivating Audition to work on another project, I tried using this favorite again on some .ogg voice over files with 48 kHz sample rate, mono.This is when the error message "The favorite cannot be applied to this file" pops up.A screenshot can be found here:https://drive.google.com/open?id=1JJBztpXf0UJYYEYAHF1AMqSUNTZnqJuvI wasn't able to find anything about this error online so far.Any help/comments appreciated.Cheers,Philipp

Hi, Im not sure how to ask this.  I am looking to stop a song midway though its playing and holding the last note for a couple of seconds while I add an echo and or delay.  I hear a lot of songs that end this way, but I want to try to shorten the song yet get the same echoy ending.  Anybody understand this.

So I'm in the middle of converting hundreds of WAV's to M4A's for a project I'm working on, and after updating to CC 2018, now it's broken - I'm now getting :"An error occurred when saving the file to disk.  The destination may be full or no longer available" with a red exclamation symbol next to the file(s) concerned.The disk is a NAS (I've also tried local) and now, as others have found, I can't roll back to CC 2017 - I have installed CS6 which works, but now looking for another solution quick smart - Adobe, get this fixed !

This is a very bizarre issue, but it's happened to me twice on two separate recordings and is a bit of a problem. I record a podcast directly through Audition via a USB recording interface. I've noticed that at a seemingly random point towards the end of the recording, the recorded content seems to have been sped up. It lasts for a few seconds and then returns back to the normal speed. It's like a 2x fast forward was applied during the recording and is now baked into the recording itself. My recordings feature two separate tracks for two voice inputs. The speed up occurs on both tracks.I've had this happen on two separate recordings - totally separate project files. Furthermore, these two recordings were actually done on two completely different USB interfaces as well, so I'm certain it's not the interfaces (neither of which have the option to do anything like what I'm hearing). I'm not sure if this is related either, but occasionally if Audition loses program focus, the recording will