Audition

I use multitrack sessions on a regular basis, and there are many instances in which I stretch the audio that I'm working with.  However, the default "stretch type" is always set to "Monophonic," as illustrated in the image below:http://prntscr.com/fwyqjr However, I almost always need this to be set to "Varispeed" instead.  Instead of having to change this value for every single audio track that I put into my multitrack session, is it possible to make varispeed the default stretch type instead of monophonic?  Is it possible to choose a default stretch type?

I start out with mp3 files and then make a session.Audition asks me to move the files I am using intothe inside sessions folder, but the files changeby themselves into much larger wav or aiff.Why do I want that and can I keep them as mp3?2017.1.1 build 10.1.1.11Thanks anyone

I'm relatively new to audition, audio editing, and thus I'm at what currently appears to be an impossible task by today's technology.My grandfather passed away in 2012 and within the past few years my uncle brought forth some cassette audio jam sessions of he and my grandfather playing.I am not sure if the cassette deck was tied into the amps they were using or if it was stand-alone. Nor am I certain of any settings setup during the recording. He asked me if I would be able to either make the vocals louder and/or diminish the guitars so that the vocals could be better distinguished.I've been tinkering with various settings in Audition to try and see if I can't figure it out. Watched some tutorials and tinkered some more.At various points in the audio the guitars over power the vocals significantly and I do not believe they were using a mic... I could be wrong.I was able to convert the cassette to mp3 via a converter I picked up. I have about, I think 45 minutes, of varying vocals to pl

I have a yamaha mg12xu connected to my pc. The audio is routed back to the mixer which is connected to yamaha hs5 monitors. I have been trying to use the metronome on live music recordings. My issue is that the metronome gets recorded on each of my tracks. I am not sure what I am doing wrong.

hii 'm trying a new program in trial version and i really liked some presetsi really like this presetAmplify light , the program is goldwave 6.28i have here a screenshotcan i obtain the same effect in audition cc with dynamic processing ?thanks

hijust a question are more efficient the vst or vst3 plugins?i have read about vst vs vst3 , for somebody vst3 are less stable but they have advantages (can work 64&32bit)may i know your experience with audition cc ?thanks

Hi. I can't resize my selections in spectral frequency view. Sometimes it's available and sometimes it's not. Toggling with shift z doesn't work either.  Any suggestions? Thanks!

I'm trying to use Audition to make certain measurements of audio equipment, as those of you who've seen my previous posts are aware. I know it wasn't made for that, but I've got it and I'm trying to make it work. After several hours of frustration, I've concluded that Audition's Frequency Analysis module, while in some ways very good, is a serious limitation for me. The reason comes down to its windowing capabilities. I'll demonstrate the problem a little further down. For now I'll just get to the point: Is anyone aware of a plugin that works with Audition and offers expanded FFT-windowing capabilities? I really don't need much; in an ideal world--for my current needs--I'd simply add a rectangular (Dirichlet, or no windowing at all) windowing capability to the current program. I do not need or want real-time FFT: I just want to analyze files. (The only reason I'm interested in an Audition plugin is workflow. Stand-alone programs would require a couple of extra steps: saving files, swit

I was very familiar with Cool Edit Pro and Adobe Audition 3 back in the day.  I'm finally getting back into music again but a couple things with Audition CC have thrown me off and I can't find the answer in the program preferences.1.  When deleting the beginning portion of a clip in the waveform editor, it moves the entire clip in the multitrack regardless of it being locked in time.  How can I delete the beginning of a clip without the entire clip moving?2.  When exporting a session as a Multitrack Mixdown, it also adds any blank/silent space at the end of the session.  For example, I record a 2 minute song, mix it down and its 2 minutes 30 seconds because it adds 30 seconds of silence at the end.  I want the mixdown to end after the last clip.  How do I do that?Thanks!

Hi, friends. there is a problem that I can,t solve. I use a lg all one with hdmi port. This is connected in a cable tv box.well, I record my audios with a audio technica 2500 usb. with the cable tv connected (but turned off) I get the following trackbut if I retire the cable tv from hdmi port, I get thatit puzzles me

Hey Guys, I have a play that I am mixing in audition. There is ambient music playing in the background of the scene, which I am trying to create a ducking effect for so that when the charaters speak, the music will attenuate. Well, there's really just one main character, a sock puppet, talking to himself, if it would just duck the music when he speaks, I would be happy. There is also other random ghost voices that come from the corners of the room but I'm not that worried about ducking under them, they only have a few lines. BUT I CANT GET EITHER TO WORK.I created an effect on the effects rack for the music track and moved the two white dots to a perfectly flat -25 limit at the top of the chart. Then I clicked the side chain button indicating there will be a mono input. Then I set the mono track of the speaking character to have a send track (volume up to +0) and aimed it at the processing effect on the music track. I notice absolutely no difference. None at all. Also, I've now noticed

I use a simple live noise reduction in adobe audition for use with programs such as Skype, and OBS. I take in audio from my Blue Yeti Mic (Stereo) and output it into a Virtual Audio Cable Line 1 (Stereo.)Recently, when I've left this setup going, after about 10-15 minutes of use, the quality of my voice has begun to degrade. It will begin to sound slightly distorted and the pitch lowers slightly. (This happens regardless of whether or not the Noise Removal effect is enabled.)The kicker is, if I switch my output off of Line 1 to anything else, and then back to Line 1, the problem fixes itself for a little bit again.

Hello - how does one download quadrophonic 192/24 dts hd audio files from a blue ray disc into a file that is compatible for import into AA?        Thank you                      Gary

So let me rephrase what the title is asking; when I import two sounds, for example, some piano tunes and some electronic music, they sound similar but they sound weird when you put them right next to each other, is there a way i can make two tracks sound similar in a certain time frame within those tracks. (im sorry, but im trying to explain this the best i can) so say the clip goes from 0:00 (s: ms) to 20:00, and I combined the tracks at the point 10:00, and it sounds weird with the sudden change in the sound, so i would like to make it sound smoother. Im not sure if this is a good explanation but please help me if you understand otherwise, let me know which part is confusing you so i can explain my issue further. THANK YOU FOR YOUR HELP!

I recorded the guitar part of a song and then unclicked the 'R' on that track.  Clicked the 'R' for the vocal track and hit record.  But nothing plays.  If I just click play, it plays the guitar part.  But, not if I'm recording.  Any ideas?  I'm using Windows 10.

Hii know audition cc work in 32bit float ,but may i ask increasing the sample rate from 44100 to an higher value does it improve audio rastauration ?i mean will this give to audition more data to elaborate better the audio?thanks

I need to measure impulse response for some electronics. Problem 1 is coming up with the impulse stimulus file--that's all I need right now. A proper digital impulse, should have a single bit--right?--with silence before and after. Sounds simple, but I can't figure it out. I can easily delete all but one sample, but then there's no silence. If I use the "silence" feature, Audition appears to do some sort of convolution--anyway, things get rounded off and I end up with many more non-zero samples than I want. An alternative would be access to .wave files with the properties I want--a single bit, silence before and after, at several sampling frequencies. Once I've got the file, making the measurement should be easy. Can anyone help with either of these approaches? Thanks.Jim

I use Batch Process often because I work off an external hard drive and need all my session files to be in designated project folders. Occasionally I get this message -  “Batch process cannot continue because one or more selected files have a location or filename which is too long. Try again after adjusting your export settings”. I have looked around but find nothing obvious that would allow me to change said export settings. Something it telling me that it's a Window issue, but any tips or clarification would be most appreciated.Joey DiFazio

I am just looking for an A to Z list of steps while editing my podcast. I've been at it for almost a year and I still don't know exactly what I should do initially. For example (I have done normalizing, dessers, match loudness, etc.) I still don't know what I should do first, second, and last. I would greatly appreciate a straight forward example to work off of.just to give an idea of my set up I have a small room that has acoustic foam on the wall, we use condenser mics, and an H6 ZOOM. 

How do I view the data-under-cursor amplitude levels in samples rather than dB? I have a two channel wav file with one channel audio and a second channel synchronous non-audio data. I chose to the vertical axis to view the waveforms in samples not dB.

Hi there, I want to grab the spectral frequency display of my audio clip as a visualization aid for an installation, is there a function for this or some other way to pull this off Audition?Any advice will help, thanks!

Was just curious how I go about doing this.  Can't seem to figure this out.Went and used the default "podcast" template.  Can't seem to get the "Interview" to record the sound coming through my headset or the the sound coming from discord.From tutorials I've seen I went and made sure I had "Stereo Mix" enabled in my computer settings, but from there can't figure out what to do next.Any help would be appreciated.  Possibly pointing me at a up to date tutorial as most I've been finding are from Audition 3 it seems.

Intermittently, the "Save" function in Audition fails for me. I'll choose "Save," and when I attempt to close the project, I'll get the pop up window asking if I want to save. If I choose "yes" or "yes to all," the window closes like it worked, but then pops up again as soon as I try to close the project again. The cycle repeats until I either save the project under a whole new name (which quickly gets confusing for file management), or close it without saving.If I close the project anyway, I'll find that my most recent work hasn't been saved -- sometimes minutes of work, but on two occasions early on, multiple days' worth of work. It's incredibly frustrating. On those occasions, I've checked both my own Adobe Audition folder on my hard drive, as well as the backup folder in Creative Cloud, and found only older versions of the un-saved projects. (Right now, I'm trying to save a project I just finished revising at 11 a.m. today, and the latest version I can find in either folder is from

Bonjour, Hey y`all,I've placed various test markers on my PP sequence and they won't show up in AA when I export said sequence using Edit > Edit in Audobe Audition > Sequence (see screenshots). I've tried different types of markers (Comment markers, then Chapter markers) as well as placing markers on the clips instead of on in the sequence. Niet.I've done 20 min. worth of Googling & researching on this to no avail. Any tips or workarounds would be greatly appreciated.Cheers,JFPremiere Pro CC 2017 Build 11.1.2(22)Audition CC 2017 Build 10.1.1.11Windows 7

Well, here we are five years on and Mix Paste still doesn't work in the latest release the same way it did in Adobe Audition 3.0.I record an hour-long radio program in segments.  Each segment is a WAV file.  The final product is 58 minutes long and it is a WAV file called BUSINESS.WAV.  To create BUSINESS.WAV, I record, say, six minutes of segment #1, SELECT ALL, COPY, switch to BUSINESS.WAV, highlight the last few seconds of BUSINESS.WAV, and MIX PASTE segment #1 into BUSINESS.WAV.  Under 3.0 this works perfectly.  Under the latest release, the material being pasted is truncated at the point where the BUSINESS.WAV ends.  Under 3.0 this truncation does not occur.  The MIX PASTE occurs and is extended, as necessary to ensure all the material ends up in BUSINESS.WAV.Cheers!