Audition

Hello to all audio experts.I have a few question and I'm really looking for some constructive advices.We had a conference where we have recorded all the presentations with ExtremeCap 910 (http://www.avermedia.com/education/product/all/extremecap_910). We where capturing video with ExtremeCap 910 and for audio we where capturing it separately trough audio jack connected to the ExtremeCap 910. But we had some technical issues and at the end we had to record all the audio with ExtremeCap 910 recorder which was a few meters away from the speakers. Those the audio we have right now is very bad.Here is the link to the audio. I have extracted it with VLC from the source: Dropbox - recorded_audio.mp3 Now my questions are:is1. Which effects/techics in Audition CC should I use to try to improve the audio so people will be able to actually understand what the speakers are saying? I tried with (normalize, vocal enhancer and a few others) but with not great results. Audio is a little better but not

The "Action" menu on the items in my Inbox doesn't do anything, so it won't perform any actions. I have no need at all to save the contents of my Inbox, nor do I have the time to spend maintaining yet another collection of online forum messages and notifications I didn't ask for.Please... How do I clean out my Inbox?

I recently bought a Focusrite Scarlett 2i2 (2nd gen) and when I connected it to my PC, Windows attempted to install the driver but failed so I downloaded the latest driver from the Focusrite website, v4.15.0.172. I can select the 2i2 as the default recording device but when I attempt to select it in Audition I received the following message: " The audio input is not activated. Recording audio is not possible. Please check you input configuration."I've checked everything and can't see what's wrong.Windows is fully upto date.Can anyone help?[Moved from non-technical Forum Lounge to specific Program forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

I just installed CS6 and when I try to record I get "the sample rate of the audio input and output devices do not match. Audio cannot be recorded until this is corrected".The problem I am having is that one of the devices is 'greyed out' so I can not change it to match the other device. And the other device doesn't offer the sample rate of the device that is greyed out. So what can I do. One is 44,100hz and the other is 48,000hz.I am using Steinberg for recording interface. Below you can see it is grayed out at 44100hz.Now if I go to my playback, it shows only one option, i.e 48000hz option.

I know lots of people here are very excited about Project Voco demonstrated on stage last fall. However, in searching for interesting news about the project, I came across what appears to be a scam site at vocobeta dot com. Two questions: One, this is a scam, right? Some parts look legit, but the copy and the icon design are a little off. Two, if it's real, should I expect to get into a beta group if I sign up, or is this just collecting emails?

I have no idea what the issue is here:I have both restarted my computer AND uninstalled/reinstalled the programme several times.I can still use effects using the drop down list.Screenshots below.Any suggestions?

In the spirit of extending my skills into podcasting, I foolishly tweaked a few settings. Yes, I am definitely dim when it comes to understanding the audio world. Honestly, I thought I untweaked everything. But no. And now I cannot hear my adobe audition files through my headphones and neither can I record through my mic. I can do both on Studio 1 so nothing is broken. I would be eternally grateful for any directions-for-dimwits to restore the settings to how they should be.

We had a meeting at our company with a delegation, the discussion was live interpreted to 4 different languages now,  the meeting was recorded for archival purposes,  but after the meeting was finished and while I was checking the quality of the recording I realized that sometimes the interrupters were talking while they kept their mics on and because of that their voices were picked up on other language channels which it shouldn't be the case, Now how to fully remove those individual voices from those channels without effecting the audio quality of the rest of the channel as there are still people taking while the interpreter voice can be heard in the background.

I recently changed from Audacity to Audition for Voiceover recordings.However ever since using the system I have on occasion found that I get a garbled sound (almost like being underwater) and clicks. There is no particular pattern to this (not at the front and end of tracks)Au Support cleared my machines CACHE and the problem has not been resolved. I am using the mac above and record through a Rode NT1A mic (with a shock), through a Focusrite Scarlett 2i4 into Audition. I record single track mono at 48k with a 32 bit float and have tried changing the Buffer speed which make no difference.  I purchased Audition to assist with ACX audiobook production but at the moment I am struggling due to the above.The equipment is around 10 months old and is kept in a recording booth so I don't see any issues with damage - it just seems to be an issue with Adobe.Any ideas would be most greatly appreciated. 

Hi,SummarySomewhat a newbie, I am transferring some important old archived cassette recordings from family members to a digital format.I am transferring the recordings from my old but good condition 16bit tape deck, into a 96khz .wav file in AA on my PC. I trust will allow me to work on them whilst maximising the chances of keeping the original quality as good as possible - right through to the final CD.ProblemOne one such recording there are some noticeable clicks and a few that are truly huge! I have provided a picture below to illustrate this, and you can see the thin vertical lines between the narration clips.It sounds to my ear like the big clicks possibly might be scratches/clicks on a record, accompanied with minor ones that possibly are LP dust clicks. As there is some piano music playing in the background, it might be that this is the case, and the narration has been done against a low level music backing on an LP - but I cannot be sure.There is no way I can get the relatives

I realize that there isn't a user interface to allow me to change the background of the frequency analysis window like can be done for in the waveform background but is there a setting in a file such as the ApplicationSettings.xml file that can be manually edited.  I see multiple fields of type "ColorRGBA" that look promising, but nothing in the Frequency analysis section of the file.  If not this file, any other one that might have the background color setting for the frequency analysis?  I like to use a graphic produced by cropping down a screen print and prefer a white background for my graphs.  

Hello,I have this new computer for at least two weeks. I also had Windows 10 updates last night. When I tried to load Audition CC this morning, it's didn't load the screen at all (Plus I had to go to work). On Task Manager it says that it's not responding. How do I fix this problem and have Audition load normally?

Recently, while recording new audio in multitrack, the waveform has been bright red while recording, as is the rectangle around it. The audio is recorded properly; this isn't even necessarily a problem, as Audition is functioning exactly as it was before. The track will revert to the default color once it's finished recording and you wouldn't know that there had been anything different at all; however, I'm at a loss as to what it is that Audition is trying to tell me here because I can't seem to find any documentation. What does this mean?

Sirs:My computer is Win 7 64bit Adobe CS6. Using  mono mic thru M-Audio Pro-USB. How can I record to both channels at the same time? Otherwise I must copy and paste which very time consuming.Thanks,David

Ik gebruik al heel lang diverse Adobe producten (Ps, Ai, Dw en Audition) onder Windows 10.Sinds kort kan ik Adobe Audition niet meer opstarten. Althans, ik zie wel processen starten, maar die beëindigen direct weer zonder verder enige activiteit op het scherm.Ik heb gede-installeerd en weer opnieuw geïnstalleerd, maar dat heeft niet geholpen.De andere Adobe producten blijven werken als normaal.Iemand een idee?Corné

I'm running into a couple of problems:1. (This one has happened to me many many times): I go co close Audition. It asks me if I want to save all unsaved changes. I click yes or yes to all, but no matter what I click, even if I click no, the program will not close. the only way I can get out is to cancel it through task manager, and of course I've lost a lot of work, though I never know exactly how much.2. I save my file, as I do often. Then it starts trying to export the work to ... I don't know where, but that's inevitably followed by the message "The file is in use by another application and cannot be overwritten."Both of these problems often recur even after I reboot the whole system.Any insights would be greatly appreciated.Thank you

HiWhenever I reopen an Audition project it loads up fine with all my plugins, but without the preset name; instead it says "Custom". The preset is there, but not its name. It's driving me nuts!To clarify: I insert a plugin, I select a preset, I save the project. I close Audition.                I reopen Audition, reopen the project, go to the plugin: I can hear the preset, but the name isn't there, only"Custom"!

I have connected an ADAT interface to my RME Babyface, and while I can see (and hear) the inputs to the ADAT interface just fine, I cannot for the life of me understand how I am supposed to be able to record the eight inputs in Audition.When I check the Audio Channel Mapping settings, all I can see as a default input for Audition is "Default Stereo Input".I know I can record several tracks when I enter Multitrack mode, but I want to be able to record eight channels (or even the eight ADAT input channels mixed down to stereo input into Audition) in Waveform mode.Is this possible?I just launched Audacity, and immediately found out how I can record, say, ten channels into it. Input from ADAT interface is registering just fine.Can anyone help me set up multitrack input into Audition?

Hello, we have encountered an urgent problem with Audition and are hoping someone can advise us on a solution. We recently did an update of Adobe Audition CC but now when we import the OMF files Audition it is no longer able to manage them. If we use the non updated version instead we have no problems. The OMF files we use are generated by Protools 11.3.1. We were wondering if anyone else had had this same issue and what is the solution to this.Thanks for any advice.

Hallo zusammen,ich habe folgendes Problem bei Audition 3.0.Wenn ich eine Session (Track) mit ca. 8h aufnehme, abspeichere und wieder öffne, sind nur ca. 2h27min vorhanden. Wenn ich diesen Track außerhalb von Audition abspiele, läuft er volle 8h. Kann uns jemand helfen ? Wir sind eine Schule und müssen aus diesem Track einige Dinge herausschneiden. Vielen Dank

I'm working on project where I take a sample of a musical instrument tone, adjust for pitch and amplitude, then clip a representative sample that can be played seamlessly at the correct pitch.  When I look at the FFT graph of the original and the FFT of the looped replay of the sample I see that  the single cycle looped has extra peaks not in the original sample. The original sample has peaks at the proper frequencies for the sample. It goes down to -80db.  The first peak should be about 440hz but I'm seeing additional peaks at 146hz and 292hz.  146hz is 1/3 of the fundamental and 292hz is 2x 146.  Since both show up before the desired fundamental of 440hz they may be a problem.  I only want the 440hz and its harmonics. The single cycle graph goes down to -160db. .I did a quick test to see if I can figure out the extra peaks.  The graph shown below actually has 3 cycles of the wave so that the pitch came in correctly when played at 44100.  I did

Hello,I have this audio coming straight from a camera video interview.It was filmed with the T5 built in mic but there was horrid wind outside. What can I do to remove this?http://peterfriedlander.tv/windsample.mp3

Hi,I insert few recordings into multitrack, saved it and gave colleague to cut it.Received a multitrack file that on the beginning looks good but further the timeline there is more "delay".Finally, after 40-60 minutes on the timeline cuts are located in the middle of the sentence instead of the end of sentence. Everything looks ok on colleague computer.

I understand Windows 10 now includes no option to record streaming audio from a radio station. I would like to record a radio show I stream and was hoping there is a way do record streaming audio through Audition? This is for my own personal use only.Previously I could record streaming audio through Screen Recorder Pro but when they wanted $129 to renew for the year, I decided not to renew and since I have Creative Cloud I was hoping I can record streaming audio through Audition.Any advice out there?

Changed from DP and Logic to Audition last year.  I do VO, so just editing my own voice usually.When I have a sound that I'd like to lower the volume on, like a slight whistle on an 'S' sound... or a remnant on the back side of a fricative like a 'T' or 'K' that I'd like to fade hard... the volume reduction seems selective, as parts of the waveform in the selected area pop back up to where they were - ignoring the command I just gave it.Same type of thing happens when I do the fades... it often doesn't want to fade the area right at the start or end of the fade, and leaves a bump of audio right when it should be just about at zero.When I made those kind of waveform adjustments on my old platforms, it just kind of did what I wanted... this not so much.Am I missing some setting.  Any help greatly appreciated, because this little thing is costing me a bunch of time.Thanks