Audition

Brand new laptop (MSI Pulse 15 B13VGK), Windows 11, Fully Updated Adobe Creative Suite for Enterprise Scarlett 2i2 4th Gen connected via USB ND-1 Microphone connected to Scarlett via XLR Audio Hardward mapped to L/R to channel 1 Mono Input AND Output go through Scarlett   My old laptop was having trouble and freezing mid recording, so I bought this MSI to last me for the next half decade or so. The sound comes through perfectly from mic to headphones, but audition will ONLY record if the laptop has been freshly restarted and will ONLY work for ONE file. I'm in the middle of recording an late relative's letters and it's becoming tedious to restart (not to mention the startup sequence puts the processor through its paces enough that the fan goes into high mode).    Thoughts?

I'm facing this issue "the file is in use by another application and cannot be overwritten"It happen when i save the video in audition through premiere pro.

Hi Guys,   I'm so sorry, but I don't know how to find my previous threads.  I did finally find a couple of my old ones, but not all - even when I click on my username.  The one I just put up a few minutes ago - I cannot find it.  I totally understand, best to keep my related questions in one thread, but again, I have the most awful time finding them.  As for my post I just put up, I guess everything is back to normal, the dynamite stick is gone, and so is the vertical blue line.  Again again, thank you for your help.

I am trying to create a voice over for commercial use on Mac OS. It appears Apple does not allow their voices to be used for commercial use. Where can I purchase additional voices? 

Recently, I attempted to extract certain information from an 'audition' project file, and the majority of the process was smooth. However, I encountered difficulties when trying to retrieve the volume envelope data for an audio block. Below is a segment of the volume envelope data for this audio block:  <parameter index="0" name="volume" parameterValue="0.444500863552093505859375"> <parameterKeyframes enableSplines="false" readOnly="false"> <parameterKeyframe sampleOffset="877161" select="false" type="linear" value="0"/> <parameterKeyframe sampleOffset="934794" select="false" type="linear" value="0.477580726146697998046875"/> <parameterKeyframe sampleOffset="955558" select="false" type="linear" value="0.558142960071563720703125"/> <parameterKeyframe sampleOffset="974984" select="false" type="linear" value="0.64999997615814208984375"/> <parameterKeyframe sampleOffset="1052584" select="false" type="linear" value="0.68

Multitrack  clips are no longer manually adjustable - mouse cursor no longer visible in clip.      I'm using Audition v 24.4.1.3 and after the latest update a couple of weeks ago i have no cursor inside an audio clip in multitrack editor .  I can't adjust the volume envelope any longer.     Have i inadvertently turned it off somewhere?  Of is there an option somewhere to turn it on now?    It's an essential tool for one of my main jobs every week -  massaging about a hundred elements into a professional sounding radio show.   I've tried the auto ducking features but it's not precise enough for what I want to do  - and it makes too many incorrect assumpions.   Takes me about 3 times as long to get a much less professional result. I have attached two screenshots from a multitrack editor window and you can see the yellow volume line is there, but i can't move it, bend it,  or touch it wth a mous

So here's my dilemma, maybe someone has an answer or solution for this.I recently downloaded the demo for sugar bytes effectrix, I tried it out and liked it so I decided to buy the full version from their website. I applied the effects to some tracks in Audition and I can hear the effect on the timeline during playback but when I export the mixdown and play the final mix in my car, I do not hear the effects. Does anyone know why or have a solution for this? Thanks.

אשמח לדעת כיצד ניתן 'לשחק' עם טונים של קובץ מוקלט.

I just moved over to a new laptop and encountered an issue where my recordings are all cutting off at 4khz. I'm using the exact same mic as I was on my old system (Samson Q2U). I've checked all the settings across both computers for bit rate, frequency, etc for both the system settings and those in Audition and can find no discrepancies; both laptops are using the exact same version of Audition. Both are using up-to-date versions of Windows, although the new system is using the Home version as opposed to Enterprise on the old one. I'm completely stumped and would love some help.

How do I solve the error, "Destination full or does not exist when saving to mp3 from WAV. 

Hey Adobe Support Community, I have one audio file with 20 different tracks, which I opened an empty stereo session for. I separated the different sections into tracks 1-20, but there is no option that I can find that allows me to export those tracks as separate mp3 or aac files. Maybe I am just missing something in plain sight, but if you could help me with this issue, that would be great! NOTE: I want to export the files as mp3, highest quality possible.

I need Adobe Audition for my iPhone. In Apple App store there is one app named as Audition using same Au logo but seems not belonging to Adobe. Can anyone clarify is that officially from Adobe ???

Hey,   I'm running into an issue. I have a music audio that I'm working with in my 5.1 mix. It plays fine in waveform but once I bring it into the multitrack session, it clicks and pops in certain areas, which are also noticeable on the exports. I'm not sure why this is happening. Is there a way to fix this?

Urgent help needed pleaseOut of a sudden and for no apparent reason, my audio mic input is very low- it is blocked at -16 dB even when I shout into the mic- it doesn't go any higher into the red. It is also showing me other strange errors like MME error, no option for IN clock etc, which go away during my troubleshooting.  It does record but very faintly , up to -16 dB only.I have a desktop PC on Windows 10 Pro 64 bits.I have:restarted Audition twicerestarted my PCran Windows sound troubleshooting - it shows "no jack information available" for my mic (Yeti Blue Pro) which is unable to fix (?) - I've been having similar issues in the past with the same error message - which was always resolved after restarting Audition and reconnecting my mic.  Not this time.tried a different mic (also Yeti)changed the mic cableNOTHING helps.Audion has recently updated itself, and this issue appeared after the update. 1. It's not the hardware issue2. It's not Windows issue  as i

Hello,  I've been working with Audition for years and a few months ago I noticed that the DeNoise effect has stopped working in the newest version of Audition 2024 (v 24.4.1). Since then, I've had to downgrade to Audition 2023 where the DeNoise effect does work, and I'm able to finish my projects for work. I'm reaching out to see if anyone else is running into this problem, or if there's something that I need to do to fix this problem. I haven't tested any other effects in (v 24.4.1) since the DeNoise effect is the bread & butter in my effects chain.  Let me know if anyone else has encountered this as well, or if there's a solution that I'm missing.  Thanks,  Basic info from Guidelines: - Adobe Audition 2024 (v 24.4.1)- MacBook Pro 2023 - Apple M2 Max- macOS Sonoma Version 14.5 

Interesting problem. I'm using audition for voiceover work using a focus rite scarlet solo and a Shure SM7db.  I've used it successfully for many years. However now all of a sudden, when I attempt to record in waveform view, the input is distorted - sounds like a robot voice. When recording in multitrack the recording is fine, no distortion. Additionally, when I record straight to QuickTime it sounds fine as well. Does anybody have any insight that might be helpful? Thanks in advance.

How come Audition doesn't show up in Creative Cloud on my Windows side when I open Creative Cloud? Using a M2 Max MacBook Pro running Parallels 19. I would use the Mac side but there's a certain third party plugin that only works in Window's Audition. Thanks

I use this all the time and have never had a problem. Today, between editing two files (Mono Audio WAVs) without any changes to Audition, it suddenly stopped working. If you check out the screenshot, you'll see the Amp Stats are up to date (i.e. no warning triangle) after running Match Loudness.  Check the Max Peak at -3.1, then look at the stats: -3.81. Can anyone tell me why? ThxSYSTEM:MAC OS VENTURAAUDITION: 24.2.0.83  

I am trying to use Adobe Audition CC 2017 to record an audio podcast with my friends on Discord, but I cant figure out how to capture their audio. Any ideas?

Help! I have several of these audio clips where a loud crow is calling in the background and I've tried everything to get rid of it: noise reduction (capturing a noise print), sound remover (learning the sound model), and trying to delete the bird call altogether. I'm wondering if it's too close in pitch to the speaker's voice for complete removal. I've attached the files for your listening pleasure. The first one is WITHOUT any editing, the second is the best I could get it to sound.

Hey Guys n Gals, i was trying to figure out, how can I determine where my file stops? like I export my clip n save it. I play it back on my phone or music player on my pc n it adds an extra 20-30 seconds after the clip stops playing. Any help would be appreciated,  thanks 

I used Audition to record audio and edit on my old windows 10 laptop but when I upgraded to my new much better laptop I am experiencing so many issues with audition especally when recording with any divices but esspecially with my usb microphone, I'm at my wits end I've searched for every driver I could update and reinstalled Audition multiple times and even reintalled windows but nothing has solved my issue.

Why have my thumbnail icons switched? The colored one used to be for wav files, the B&W for PKF files. I updated 10 days ago:   

Folks,As the title states, this version takes this much time to complete this step of the initialization process every time I start Audition.  It works fine after initialization completes.  Version 11 has no issues.  I find Version 12 unusable until this issue is resolved.  I have tried resetting to the defaults, but no luck.  i am using a mid 2015 Macbook Pro with Mojave (10.14.4) at the moment.  Below is a clip of the log file.  Please help.Ticks = 2492      <4519183808> <AuLog.Startup> <5> Initializing AuUITicks = 83236      <4519183808> <AuLog.Startup> <5> Setting up temp directoriesTicks = 83268      <4519183808> <AuLog.Startup> <5> AuUI initialization sequence complete.Thanks,Blaine