Audition

Hi everyone, I´m encountering an issue I haven´t had before. Every clip I edit and work on in the Waveform tab sounds more muted and less bright in the Multitrack tab.The Multitrack presets are set to Default, and I use the same settings I usually use. I even reset Audition´s settings to their default by pressing shift when opening.I´m also experiencing the same problems with older projects that I´m opening now.The only explanation I can think of is that Windows recently updated automatically. Maybe that changed something, IDK.The following link contains two audio files. One contains a voice-over recording directly from Waveform (mono), and the other is the same voice-over exported from Multitrack (stereo), so you can see and hear the difference. There´s also a screen capture of a test session, so you can maybe spot something I´m not seeing.https://drive.google.com/drive/folders/1vwne_tTVPtwpXAzU4HtXaG8yGCokg3YF?usp=sharing The problem is driving me mad and making using Audition i

Hi everyone. After I exported my multitrack audio, it doesn't play. I've tried exporting with wav and with mp3 however nothing seems to work. What could be the problem and how do I solve it?

I have downloaded several Microsioft voices to my computer. When I am in Adobe Audition and using Effects>Generate>Speech it only allows me to change the Language and Gender selections. The Voice is greyed out and only shows Zira for the female voice and David for the male voice. How can I select different voices? The voice is circled in red in the jpeg below. 

I'm recording in Audition 2023. Mono in multitrack.OS = Big SurMy recordings won't play back inside audition. I can see the waveform in audition and playback the .wav by clicking on the file in my finder. But that's it.Settings are Input: External interface (behringer u-phoria umc202) and Output: internal speakers (System pref for sound match the settings in Audition).I've tried restarting - didn't help. I'm a VO artist with an audition due tomorrow. Help please!

Hello, I've been using audition on my work computer for 5-6 years now, and as of yesterday started expericing an issue i've never encountered before. Whenever I go to record anything in Audition, as soon as I hit record the recording immediatley stops and starts. I originally thought it was a lag, but it's not a lag because almost no audio is recorded. You hit record, less than a second of audio is recorded, it stops, then after a few seconds it starts again, records less than a second of audio, and stop again. This just continues happening. I can't record anything because of it. My IT team is pretty stumped at this point. My first thought was maybe there isn't enough storage space on my laptop? I've deleted files and programs, but to no luck.  Any help would be appreciated. Thanks!

Have tried several avenues and none successfully.       Just would like to move/duplicate my keyboard shortcuts from office computer to my new laptop at home...  thanks  

Bonjour a tous, J'ai installe Adobe Audition 1.5. Je controle adistance via une adresse IP un autre ordinateur ou est installe l'application adobe via adresse ip. Je souhaite avoir le son d'un recepteur SDR vers adobe pour avoir le signal en temps frequence. Pour ce faire,  - j'ai installe un cable virtuel VB-Virtual cable audio, ce est bien installe mais je ne le vois pas dans l'onglet sound "playback et recording" de l'ordinateur que je controle a distance. C'est le premier probleme. - Quand je lance un enregistrement sur Adobe, j'ai ce message " A device ID has been used that is out of range for your system", c'est le deuxieme probleme. J'entends bien le son de mon recepteur SDR ou le casque est connecte sur l'ordinateur principal (pas celui a distance) Je ne c'est si les deux problemes sont lies ...  Merci de m'aiguiller, CdltBen

I wonder about the field down to the right in Edit View: "Detect Dropped Samples".I experience dropped samples while recording in Edit View, however they are never reported by Audition in this field.If i get dropped samples between the Audio interface (ASIO) and Audition, how do I detect them?Mats

Hello, first time poster using 24.4.1.3.  I have 2 audio tracks from an interview.  When one person speaks, the other listens, and vice versa.  The listener's microphone picks up audio from the speaker.  I'm not worried about that. Is there a way to mute audio below a certain dB threshold without highlighting every single instance within a clip?  For example, please look at the sections of the clip I've placed in a yellow box in the attached photo.  Let's say I wanted all of those sections in the yellow boxes to be muted without having to highlight and mute every instance.  Is this possible?    I'm thinking of something like a "reverse hard limiter..."  Instead of pulling all audio over a certain dB threshold back to a prescribed dB, the question I'm asking is more about finding a way to mute all audio under a certain dB threshold. Will this destroy audio I don't want to destroy by muting little pauses between w

I record audio narration for YouTube videos, and over the last few years I've developed a standard sound setup to make all the videos sound the same, including the steps of my editing process. The order of processes is;1. Capture Noise Print2. Noise Reduction, 50%3. Normalize4. Dynamics Processor, Vocal Limiter5. Single Band Compressor, 4:1 Ratio6. Hard Limiter, -12DB After that I cut the audio in Premiere. But over the last couple months I've noticed that step 3, Normalize, isn't doing anything to the audio anymore. Steps 1 and 2 would clean the audio up, normalize would raise the volume, and then steps 3-6 would lower it in a clean way. But this process has been thrown into chaos since Normalize stopped doing what it normally did, and just raising base DB while recording, or just raising the DB in post doesn't work the same. But here's the weird thing. When I highlight the entire waveform, Normalize does nothing. But when I highlight a smaller portion of it (just a minute o

There seem to be some kind of presets in Audition that try to "correct" audio automatically, and in doing so create distortions. I would love some help so that I can turn these off, or at least know how to work with them. I am including two very short clips of audio. One is exported from Audition. During the silence, as the subject searches for words, Audition creates this effect as it tries to adjust for a bird in the background. The other clip is exported from Premiere. It sounds much more like the original recording in its original state. I would greatly appreciate help with this issue. It is causing me huge problems. Many thanks, Doug

I 've just updated the Blackmagic Desktop Video ( and Audio) driver to V14, which also required a firmware update for my Ultra Studio 4K. I now find that in Audition when there are inpulsive sounds they are followed by what sound like tap dancing. This is using the ASIO driver with the default settings: The exports are fine, just the monitoring. Using the MME driver with the same hardware is fine. Using the same ASIO driver and settings in Premiere is also fine.   Not sure if this is a Adobe or BM problem.   Windows 11 i9-9900k 64 GB ram RTX 2070 Super

cuando quiero grabar, la grabacion se inicia de forma intermitente; la linea de tiempo no avanza de forma continua. he progado con varios microfonos y pasa siempre lo mismo, al cavo de un rato a veces empieza a funcionar, ya he probado activando y desactivando los dispositivos, pero de igual forma el sonido deja de registrarse cuando inicio la grabacion. 

Adobe audition and Sanoma 14.2.1 - I can only record the left channel. The right channel is inoperative as it it not receiving the feed from my Focusrite 2i2. This works ok in Logic Pro and Audacity but not Audition

Has been working fine for two years.Recorded fine this morning in Waveform.Went to edit. Could only hear audio out of left headphone.Read a few dozen things here to look at, settings wise. Confirmed everything was set up right with Audition Settings.Restarted Audition. No luck.Restarted computer. Finally could hear through both channels. Could edit but my personalized Keyboard Shortcuts no longer work. And now I can't record.Read a few more suggestions in this community. Confirmed Mac Microphone via Privacy and Security settings was solid. Sound Preferences? Check. Reset my Audition settings. Still can't record.Updated MacOS. No luck. Still can't record. Any help is appreciated. Set-up:MacBook Pro.MacOS Monterey 12.7.5AT2020 mic thru Focusrite Scarlette 2i2

I just installed my Focusrite Scarlett Solo 2i2 and am trying to record just voice tracks, it is only recording the left channel.  I have looked in the forum at several different areas with similar questions and tried several different options, but nothing is changing the recording.  Any suggestions would be much appreciated.  

All of a sudden Audition is insisting both my output devices (Macbook speakers and headphones) can only accomodate a sampling rate of 16K.  None of the other programs I use (Ableton Live for example) are doing this. The Macbook Pro and the other programs recognize that my output devices have both 41K and 48K sampling.  Any idea how to fix this? I am using version 22.6.0.66 on a Macbook Pro MacOS Monterey 12.6.9

Hi, I’m new to adobde audition and recorded some silence in my recording space to check my noise floor. However, its showing an extremely quiet noise floor which I know is not right. I have a Rode NT1 mic and the gain is selected to do voice over peaking between -6 to -3. When I previously tested my noise floor with a different DAW its around -55db to -60db.  Is there some way I can get a more accurate picture of my noise floor with Adobe? Perhaps my settings aren't correct? TIA  

I don't know if this is a bug or intended behaviour, but I have loaded a wav file with a narrator voice onto track 1, and after going through it with the Razor tool to remove bad takes, notes etc, I have a large number of cuts in the track. I have also put a few markers on the clip itself to correspond to specific things in the file that I want to keep track of (i.e. select the clip and press M). Now when I right click and select Merge Clips, these markers disappear. I want to merge clips because that makes it easier to move and place in the rest of the timeline, I don't want to have to select dozens of clips and move them around every time, but I also need those markers as a reference for when a sound effect needs to play under the narration, etc.Is there a way to preserve markers when merging clips?

Is it possible to add sightlines to the Waveform Editor panel as this gentleman has done here (see attached image; go here for the full video), or has that feature been removed from later editions of Audition?

I have the weirdest problem, and it's happened on three separate computers, once every few weeks.  I edit a podcast: 5 dialogue tracks through a dialogue bus, two SFX tracks, and two music tracks. Each epsiode is about an hour long. Sometimes when I reopen a file, I'll notice that some clips are missing their waveform (sometimes just half their waveform). On checking the clip in the waveform editor, the original file is still in it's place, and I can view it in the waveform editor, but the clip will be essentially cut in half. The second half of the clip is missing entirely, so when the clip in the multitrack editor tries to reference it, there's nothing there. If I open the referenced audio file in File Explorer and compare it to my backup, the filesize is much smaller. And if I open it in an external media player, only half of the content is there. Somehow, Audition is completely deleting entire sections of my recorded audio.  Of course I can then just re-cop

For the past few years I've grinned and dealt with it, but Audition can be so difficult to use while chasing video within a multitrack session. I use mulitple Macs, PCs, high end and low end systems at our broadcast network, and this is happens no matter where I edit, all using the latest official builds of audition. Whenever I edit in multirack and have a video present, the following symptoms occur- incredible delay while switching between waveform and multitrack views- incredible delays while trying to spot in fx onto the timeline- sluggishness while trying to trium clips on the timeline.  i've tried adjusting the playback resolution and turing off spot video frame while adjusting audio clip, but honestly -these tasks aren't eaiting up my computer's memory at all, i shouldn't have to lower the resolution of the movie-I actually need to use the spot video frame feature!-it doens't improve the sluggishness much. the only solution is to:Remove the video from the sess

Hi when i try to record on Adobe Audition but the sound (wave) is completely flat. Do you know how to fix this. I went on my IMac to fix the input as well as applications. I think the issue is on Adobe Audition, but i don't know where....Thank you ! 

Hello, I have the problem with Adobe Audition crashes / shuts down, when I edit and playback a recent done recording in Edit mode (wav 24 bit 96kHz stereo). This happens so often that it is impossible to use Audition on this specific computer. It is possible to recover the crashed file, somtimes with added glitches at the end. Audition 24.4.1.3The computer is a HP Elite SFF 800 G9 Intel i5, 12500, with Windows 11 pro 23H2 22631.3593. I had the same problem with another computer, but it was solved by reinstalling Audition. I have tried reinstalling the crashing version, but with no luck.Kind regardsMats