Audition

How to remove a single noise underneath the speech, which is at the same frequency (or very close) to the speech and so can't be isolated, and is not visible on the spectral frequency display?background noise removal doesn't work, manual healing doesn't work.  It appears to be created somewhere in the system rather than recorded from an exernal source.  Healing that spot removes the voice.

Just went through 2 hours trying to to resolve what should have been a very minor issue (previous kb shortcuts were lost and I couldn't add new shortcuts).Adobe tech reps can barely understand English. They have absolutely no product knowledge - the basic proc for adding a shortcut was a completely alien topic for 3 different reps. I finally found the answer on YT.Adobe - tnis cannot continue. Unless you make it super simple to use your products, the onslaught of AI alternatives that are vastly more powerful and infinitely simpler is going to crush your market share. You can't abuse customers who are paying hjuyndreds of dollars a year.

Hi all,I use version 3.0 for my file editing and am unable to *refresh* my Effects Plugins.  I receive the following:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Multitrack Session Active!Unable to refresh effects list, effects currently being used in multitrack session. Please close current multitrack session and retry.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I have NO effects being used in the multitrack window, and when I close that session window, I still get the same alert. Is there any workaround? Have any of you experienced this?

I've produced/remixed a multitrack live recording in Audition in wave format. Since the performance and audio total is more than an hour, has 18 tracks, and runs in one flow, it would be handy to add track ID's like I use to do in Audition for cd's. How do I do this for wave, mp3 flac end products? Thanks for reading and answering. Best, René

Hey all, Super possible I'm being dumb but I've been trying to export my final mix out of Audition as a .wav stereo file but everytime I export it it ends up as a mono? is there a project setting I'm missing to check or somethign similar? Thanks in advance 

MacPro 2008, Mac OSX El Capitan, Audition CC 2017I have many Adobe Audition multitrack sessions, from which I need to export the individual tracks as WAV files.I have followed the instructions to use Export > Multitrack Mixdown > Entire Session and then selected both Stereo Mix and all the individual tracks in the session for export in the Mixdown Options. Everything looks as though it is working, but when I import the resulting files into any other audio program or try and preview them in the Finder they are all silent - both the complete stereo mix and all the individual tracks.The original sessions were created using different audio hardware, but changing the routing on the Mixer page allows me to use the built-in optical output of my mac to monitor the audio. I have each individual track routed to "Master" and the Master output routed to the built-in digital output. When I play the session in Audition I can hear all the tracks being played back, so I don't think it is a routi

Hello, Is there any insight as to why the quality of audio sounds much better in Audition than when it is played over a car stereo? I convert the final to Media Encoder. Thanks, Nicole

How do you fade in and fade out of multiple clips in the same track. And how can you set the amount of fade that is used? Thanks!

I have a podcast, and recently, when applying my workflow (simple normalizing, compression, etc.) to my recording (~40:00 in duration), an effect that usually takes seconds to apply takes many minutes. It gets up to about 35% within a second or two, then stalls out, and the Time Remaining begins to count up from seconds to minutes. I have uninstalled and reinstalled Audition, cleared my cache, and tried all the usual tricks.

Hi,I'm pretty new to audition and I'm currently working on an audio drama. I made quite some interviews with different people and made a multitrack session. For better overview I put the different interviews on separate tracks, but I still like to use crossfades. Usually, if the clips are on the same track this could be achieved easily by dragging a clip to other lap the other one. Is there a way to crossfade two clips that are on separate tracks?Or would you say that this is generally a bad workflow (with clips on different tracks) for editing an audio drama? How I could do better?I saw someone already asked this question in the past, but never got an answer. So I'm trying again. Thank you in advance!

I'm using Audition CC 10.0.2 but that shouldn't matter.  I've recorded a simple favorite that consists solely of Effects/Silence.  The work I'm doing is voiceovers and I just want to be able to get rid of extraneous noise in the gaps between my speech.The only way this script works at all is if I open the Action list box and change "Selection" to "Relative" for each action.  The actions are:Silence<Final Selection>"Works at all" means I can run the script without getting an error message.  But the noise is still there.  I feel like an idiot asking this, so please be gentle with me.Thanks,Tony

I am working with Audition on my MacBookPro from 2019. Since the last Audition update, I have noticed that my trackpad is not working as perfectly with Audition. For instance, the zoom function (two fingers on the trackpad) only works when I make fast and large movements with my fingers. Small, slow movements go unnoticed by Audition. Now I'm wondering if my MacBookPro has reached its technical limits. Does anyone know this problem? Best regards My Setup:MacBookPro 20192.4 GHz 8-Core Intel Core i9Radeon Pro Vega 20 4 GBIntel UHD Graphics 630 1536 MB32 GB 2400 MHz DDR4Ventura 13.4.1 (22F82)

Hello,    I recorded a few voice tracks on my laptop and want to edit them on my pc. I found the file via the cloud on my PC and when I clicked it, I get the '1of1 files reference by the Session could not be found. I then tried to copy the file over directly to my pc, but I get the same error when I try to open it up on my PC. It gives me an option to click 'link media' at the bottom but when I do, I don't know what I need to look for. It just says Host_005 in the file name.  I included a few screen shots. Any help would be greatly appreciated. Thanks! 

Hi, I having difficulties with the Audio Channel Mapping for Behringer UMC 1820. Im trying to record 8 seperate channels but its only displaying 2   [Mod note: moved to a thread of its own]

In other words say I have a one minute long Room Tone file. I just want to insert 10 seconds of it on a track of my choosing. Is there any way to do this, or do I have to insert the whole file on another track, cut, and then move?

I have about 40,000 aac files in my iTunes library. I need to convert them all to mp3 to make them playable by a digital audio player that does not support aac files. The library is about 350 total GB in size. Can Adobe Audition convert a batch that large? If not what can be done?

Hello, Please, I'm passing my old tapes of Sound Therapy to wav files, these tapes are designed to train ear to hear high frequencies, and the key of this tapes are the high frequencies.I want to keep the higuest frequencies of the recording.Is there some setting important to record that high frequencies, or it will be copied correctly without any modification, I cheked setting of hardware and Adobe Audition, and I didn't find any setting relevant to this task.Any advice.Thank you in advance 🙂

Hello, I am trying to mute one section of a vocal track, but it is still playing audio after I pan it down. In Waveform, I converted the samply type from stereo to mono with 50% / 50% for R & L mixing. In the screenshot below you can see the levels on the R headset are high when playing over the panned down section. Any guidance would be greatly appreciated!Thanks,Charlotte

Capture Noise Print hasn't worked for about a week. I've tried with mono and stereo, .mp3 and .wav files. I did a screencapture. I'm using 12.1.5.3. Need Help. Notice that the timer in the lower left corner remains at 0.00 seconds. Thanks

The Metadata ID3 window doesn't have a Tags or Key Words field to insert searchable tags (by Google), for a podcast, for example.This is a significant omission.  Is there a reason for that?  Is there another way to insert key words into a podcast?In spite of some views that key words are no longer useful, they actually are for podcasts. The podcast title doesn't always directly reflect the subject of the podcast, and people DO search for podcasts by topic. 

I record voiceover scripts for YouTube videos in Audition. And, because I need to make last-minute edits to my script when recording for smoothness frequently, I also frequently pause, edit, and move the playhead when recording. In previous versions, I have been able to click the "Move Playhead to Next" button (looks like an arrow pointing into a wall/line) and instantly start recording from my last point (the end of the waveform). But, in the most recent version, Adobe have changed it so that it starts recording my audio from the beginning, causing it to overwrite what I have already recorded/edited. It's a minor thing, but it is enraging to have to undo my accidental overwrite, click the playhead button, and then hit the left arrow key so that I can start recording. I have had this built into my muscle memory for at least a year and I hate to see it changed. Who needs this? Who needs to overwrite what they've already recorded at the beginning when fast forwarding to the end? At least

I see a vertical dotted line on one of my clips.  I don't know why it's there.  I have a photo of it.  The cursor is near this dotted line in the photo.  You can see it on Track 3.

Audition won't open audio files referenced in .asx (playlist) files, although the format is included in the Open options.Anyone know why? (I can open the audio files separately.) 

I once had a lot of presets in Adobe Audition.  Like for example when I go to the graphic equalizer filter I used to have tons of filter presets that I made.  Now they are all gone.  They were there days ago.  I don't know what happened to them.  Does anyone know how to fix this, if at all?

Hi all! I'm a voice actor and I've been using Audition for close to two decades now. Until about a month ago, I was running CS6 on a 2011 iMac that sounded incredible with my Rode AI-1 interface and MXL BCD-1 condenser microphone. I regularly used the "Podcast Voice" filter to clean up and "pop" my audio. It was my bread and butter. I've now upgraded to a 2023 Mac Mini. Still using the Rode and MXL mic. Upgraded to CC because, well I was kind of forced to. However, now when I use the podcast voice filter, the audio (especially the first sentence or two) sound muffled and aren't very dynamic. The rest of the audio eventually "pops" and sounds ok, but it also sounds very digitized at points. It's not at all clear and "punchy" like it was on my old Mac with CS6. Anyone else encounter this? Is there a remedy? Should I adjust settings? Try a different mic/interface setup? Any recommendations welcome as this is my livelihood and I can't have sub-par audio quality.&nb