Audition

Hello, I would like to ask your help in regards of receiving a contact emai address where I can send a business collaboration proposal with Adobe for Adobe Audition.

Hope I have a simple question, I have a Multitrack Session with 7 tracks, I want to cut (CMD K) a single track, Track 3, and when I select that track in the session and do CMD K it cuts ALL the tracks at that time. What the heck? How can I just cut that single track? I can't figure this one basic step out. Help!

I made this mixtrack a while ago using synths I recorded directly in a synth app on my ipad. Whenever I cut the track, there is a clicking sound at the beginning of each new clip, for example in the photo, there is a clip around 1:31, 1:34, and 1:41. I made this almost a year ago, so rerecording is not an option. I am an amateur when it comes to sound editing, so I don't have an idea of why this is happening. Help? Thanks in advance!

Hi! When I'm editing af project I often have little clips I use often in the same project. It could be a part with clean sound or similar. Can I somehow put these clips in a clipboard or the like, so I can always just drag the clips from there instead of having to find a place in the project where the clip has been used, and then having to manually mark, copy and paste the clip to a new place? Best,Morten

I just bought an ASUS Tuf Gaming laptop and when I connect my mics to it, I get about 30 frames of recording & none of the sound seems to even being from the mic. I've tried it without mics, just the laptop mic. Same problem. 30 frames of audio and then nothing. Tested multiple cables, the connection setup is fine and I downloaded Audacity to test and that worked just fine. Only Audition thinks that it should record 30 seconds from the beyond instead of my VO. Anyone run into this problem?  Oh, it's 32 gigs of ram, a terabyte of storage & a ryzen 7 7735. Any suggestions what else to try? Oh, I've already uninstalled and reinstalled Audition. Attached is a little snippet of the hot action.

I'm not sure if this is the right place to ask, but I'm trying to figure out how to make an audio clip sound like it was recorded in the same environment as another. In the audio file attached, the first line of dialogue ("Susan, can you please stop talking?") was recorded on a more professional microphone.The second line ("I think my ears are gonna bleed.") was through a built-in computer mic in a small bedroom.I'm trying to make the first line of dialogue sound like it was recorded with the same equipment and environment as the second. I've been using various reverb and EQ effects in Audition to make the clips consistent with each other, but I can't get it right. I think I need more experience with reverb and EQ in general.Does anyone have advice on which effects to use or what would help make them sound more consistent? Any help would be appreciated!

Dear friends and developers:  I do heavy-duty multitrack audio mixing. My company is forcing a switch from Vegas to Audition after 15 years with the former program.  I'm looking for 3 functions that would make workflows much easier for everyone, even those who are native to Audition: 1. Currently, zooming in and out on audio requires Ctrl + Scroll Wheel. Why can't it just be the scroll wheel? Why the need to hold down Ctrl? On Vegas, you simply use the wheel to zoom in and out. Which I constantly do. Hoaving to hold down Ctrl AND use the wheel totally unneccesary. Please advise2. When in the "Timeline" tool, you can move around audio clips by right clicking/holding down the mouse. Why can't we do the more intuitive left click/hold? If that's possible to change, please point me to how I can make that switch. 3. In Vegas, I can "ripple" (move an audio clip) and either every clip to the right of that clip in a given track, or every clip to the right of that clip in a p

I created a mutlitrack podcast and uploaded two separate audio files with a host interview track and a guest interview track.  Each sounds great but when I listen to them as multitack I hear a horrible echo.  HELP

I'm currently working on a multi-channel project in Adobe Audition that involves intricate angle panning. However, I've encountered a challenge when trying to rearrange audio files, as the pan settings are attached to the timeline rather than the audio. This makes it difficult to move clips around without disrupting the panning. Is there a way to lock the angle pan to an audio file or any other workaround that would allow for easier clip rearrangement without affecting the pan settings?

Hello, is there any way to change these dropped down menus match the dark mode theme? Also, the application menu bar (the white bar at the top) does not change along with system theme. Is this intentional by design? Thanks in advance for the help.

noise reduction process not wokring on a 1 hour long file I made the noise print, selected the whole file (or nothing), run the process, then i see the effects takes place at the beginning and gradually fades out to around 40 seconds.  more and more of the process degrades over time resulting in no effect after a few seconds. The targetted noise frequences gradually reapear. There are some more topics that mention this problem, but i the bug is not fixed yethttps://community.adobe.com/t5/audition-discussions/audition-cc-noise-capture-noise-reduction-not-applied-to-entire-track/td-p/10066504  

I'm desperate. In Audacity I can easily highlight a section of audio, hit the delete key, and it just takes out the highlighted part like it was never there, leaving the track as one track. In Audition I do the same thing and it takes out the highlighted audio and leaves me two pieces of audio with a gap in the middle. And while I'm here, I have two voices on a stereo track, left and right. I want to be able to edit those independently. There doesn't seem to be a way to do that in Audition. If there is I'd love to know how.  Thanks!

So, my mix DOESN'T have any hiss, but when I export WITH ALL MY EFFECTS ON it adds a pretty distinct constant white noise throughout the song on the mp3 or wav.  My question is... does this sound like an adobe glitch or maybe my processor can't handle all the effects so it's creating noise?   Any help would be appreciated, Thanks!

Hi everyone! I want to record a podcast interview with someone in another location who does not have a studio. I've read some tutorials but don't think I'm getting the gyst of it. I already have 2 podcasts, but only recording my voice. Could someone provide some details on how to do it while achieving the best sound quality? Thanks!

Hello!I'm using the Zoom LiveTrak L-8 with Audition on a new MacBook Pro. The driver is fully installed and the device class is CoreAudio (only option). When opened the mics read just fine under Default Stereo Input. However, I select Mono and tell Audition which channel input to record on each track individually and for some reason, every track does not want to read. I've gotten this to work before and can't figure out what's happening. What setting changed in Audition (or the mixer if you happen to know) that I need to set back to?Thanks for all your help Adobe Community!

When recording an audio file, all my playback is in mono. My Audio Channel Mapping notes my (L) output as mono and I don't know how to change this. A screenshot is attached. How do I get my playback in stereo? I've recorded for years and this all a sudden change is so frustrating! 

Hello, i've been editing an audio file and I was randomly told by the program that I needed to save and restart due to playback issues. I had no other choice so I saved and restarted it. Now after opening it again my file has wave lengths but the spectral frequency display shows me nothing as well as the timer will run but the levels will not register. 

Hi, I'm working an old project in Audition CS6 with some complex routing that allows me to render either 2.0 or 5.1 output and I'm seeing a weird signal anomaly that I can't explain. I'm hoping someone here can shed some light. Basically, I built all tracks in the session to OUTPUT (or Send) to a 5.1 buss chain to the ultimate MASTER 5.1 track. To build the 2.0 Mix, I used Sends on each track to a 2.0 signal chain to ultimately, again, the 5.1 MASTER track. (when I bounce the 2.0 mix, I get a 5.1 file with information only in the L/R channels, which I then downcovert to a true Stereo 2-channel file, adding back in the 8.15 dB lost in the conversion from 5.1 to 2.0). Here's my issue: I have a mono clip on a mono track that is OUTPUT to a 5.1 buss chain (which is muted). I have a Send on that same mono track to a stereo track that is ultimately routed to the MASTER 5.1 track. I have that Send panned 100% Left. When I play the clip, the meters from the track, all the busses, and the

Can I use the Adobe Podcast free version for commercial purposes like creating courses on Udemy etc?

É possivel tratar o audio do primeiro video e deixar a qualidade do discurso do locutor o mais proximo possivel a qualidade audio do segundo video? A ideia é sobressair a fala acima dos ruidos externos, da melhor maneira possivel. Muito obrigado!