Audition

The "Error with file" alert did go away with version 23.6.1, but now I am getting this... I've looked for these alert(s) and cannot find them.  Other programs (such as Protools) save ALL the assetts in the appropriate folders (audio, fades, session, video) then CLOSES.  Closing Audition can be an ordeal - all the dialog boxes, "Audition is getting ready to quit,"  and pop-ups like the one above do not instill confidence. By asking if I want to replace every source file (one at a time) with the edited version from my session there is a high risk of erasing or replacing something that should not be changed.  So... 1) What does this warning mean and where can I find the alert state it's referring to?2) Other than when exporting, is there a preference or default for always saving every associated file within the session folder while leaving the source files alone?   Thanks for any advise you can provide! 

Yikes!  Build 24 seems like a big step back in performance.  I updated today and then rebooted.  Now Audition can no longer playback my multitracks without stalling and jittering, like it can't keep up.I'm not sure what I can do other than see if I can reinstall the prior version somehow.

i have this problem for a long time, every time I try recordig stuff in adobe audition, At first it’s all fine, but then every thing becomes fuzzy and distorted, but then it passes away, and then comes back, note it Does not affect the recording, it’s clear without distort, but When this wave comes Every this is distorted even the playback or in recording. I am frustrated how do I fix this ? Oh and I am using Audition ccwith aisov4

Working on songs with saved presets for mixing but now I can't click presets on the effect rack without seeing this warning "audition has encountered an error invalid menu". Tried about everything to fix the problem but im sure someone might have found a answer for this. Hopefully so. This has became a new thing recently so hopefully this could be fix and could save others who may go through this as well.

I am trying to do a mixdown of two tracks - music files and voice on Audobe Audition  6. 2023 .  I have a desktop MAC and have just upgraded to Sonoma (since my last mixdowns which all worked fine).  Now after 40% completion I am getting the error message 000000B.  Any idea what to do, why this is happening.  is there a problem with Adobe 6 2023 and Sonoma? 

Hi Team,I have a need to apply different effects (dynamics, eq, pan etc) to a multi song live band recording. The band has 4 lead vocals/harmonies, twin electric guitars and a pair of keyboardists. Depending on which singer, guitar or keys is taking the lead, I need to pan, compress, reverb and eq each song differently but cannot work out how to apply a separate mix to each track without having to create a separate project for each song. I have found that applying changes in the mix window affects the whole timeline. I will also be dealing a multi cam live video recording which will be edited and synced with the separate multitrack audio recording. In Premiere Pro I can split the video clip and apply different colour grading and audio effects within that clip. This does not affect the clips either side. Is there a way to split a multitrack recording into separate songs and apply different effects to each song within a single timeline/project?. I hope I make sense and look forward to le

This happens only when I’m using playback inside the parametric or graphic equalizer. For a few minutes it works fine, then there is a blip-like sound and the playback goes silent. Waveform disappears from inside the EQ, but the waveform remains in the main viewing window and the playhead still moves. The audio plays fine elsewhere, including in Audacity. This doesn't effect the audio for anything else on my computrer. If I leave everything alone for 20 minutes or so, then try Audition again, it works…until I try to EQ again. Hardware input/output settings are correct.I installed a newer version of Audition but the same thing occurs. Any ideas?? 

Hello, good evening, I have a question. I use Adobe Audition to make audio posts for content for social networks. Lately, I ran into a problem. When exporting the final mix, it does not have the same gain level as in the program. And it's even exported with errors like phase shifts, audio cuts, etc. The weird thing is that this happens when I use plugins like goyo, etc. Try exporting, then mixing with in program plugins and audition the file without any problems. But when checking on the exported product, the audio has errors. It gets out of sync, looses volume, and etc. What can I do?

Hi. I'm trying to export some book chapters as MP3s. However, the publisher needs these MP3s to be 192 kbps or higher.  When I try to export the mix at the right rate I get this error message: 'The selected options cannot be used as the resulting format is not compatible with the session format.' I'm at a loss. Is there something I need to do with my audition session to be able to export it at the right kbps? 

I  have a syncing problem - audio and wave file are not matching up. The precision of what I'm seeing and what I'm hearing is off by a very tiny margin. But enought to mess with my editing accuracy. If I place my cursor tightly in front of the word "Our" for instance, the word gets cut a bit rather that giving me a clean sound at the beginning of that word. This is a new problem after using AA for many many years. I have rebooted the computer, I have used AA 1.5 as an alternative, rebooting the software, and finding no change. I have tried to edit several different files, with the same result. Any help would certainly be appreciated. Thanks very much!

I created a new session today using a template that I have used many times before. When I go to export the mixdown, it starts exporting, and then the time remaining just keeps jumping up and it never exports. I tried a fresh session with no effects. I updated Audition. Tried exporting as .wav instead of .mp3. Opened an old session that I have exported in the past. Same thing happens every time. Anyone else experiencing this issue? I'm on an M1 mac running Sonoma 14.0. Macos update is new and that's the only thing I can think of that has changed.

This is latest version of Audtion. WAVEFORM starts then audio starts about 1/2 second later. Driving me crazy. Any enlightenment would be greatly appreciated. - Mike

I recently updated my system software to MacOS 14 Sonoma. Prior to updating I was running Adobe Audition 23.6.1.3 without any problems. I had set up a number of tweaks to Audition and then saved a backup of the 23.0 folder (as instructed elsewhere) for backup purposes.  When I found out that all of my tweaks were gone, I tried to go into my backup 23.0 folder and reinsert those updates but I could not figure out how to use the application.xml file I found there. I have also heard elsewhere that there are a range of other files that should be used.Any help on fixing all of this would be greatly appreciated.

I'm listening to my recording in multitrack mode. The recording was done in stereo. Periodically, the audio will sound like it's mostly coming from one side or the other, or it will sound suddenly a bit louder. If I back up the playhead a few seconds and listen again, sometimes it still sounds weird and sometimes it goes back to normal. If it still sounds weird, I can just go back a few seconds again and try it a couple times and eventually it sounds normal. It doesn't happen consistently in the same place, it's just sort of random throughout. I thought this was just an issue in the editor, but after exporting just now I find that the mp3 it outputs has the same issue.As additional information, I have 32GB of RAM and a AMD Ryzen 5 3600 6-Core Processor. When I look at task manager, I'm not seeing an excessive use of RAM or CPU by Audition or anything else, but it still seems like the program is having trouble rendering.

Why is there no ACX plugin yet on Audition? ACX is THE standard for audiobooks and most other audio software including Audacity and Pro Tools include a plug-in to rapidly check mp3 files before uploading to ACX or you can go to ACX lab and have it checked free. Having it ON your editing platform is faster and more convenient.

Why does Audition default to saving as a .wav? I save as .mp3 for all my work and it's annoying that I have to select .mp3 every time

Adobe Audition is excellent, but one annoyance makes my job much longer. I'm a voiceover artist who does a lot of eLearning recording and the clients like the files to be split by file name - sometimes meaning I've got hundreds of files in the 'files' area of Audition.Please add the functionality to use the cursor keys to move through this list of files, updating the waveform view when the file is highlighted. At present, I have to double-click each file and as you can imagine going through a list of 100+ audio files by double-clicking each one is bloody annoying and time-consuming. Why do I need to go through each one? Well, I opened another thread for that.  Please add this functionality to save my sanity.

I'm very new to adobe. I'm using audition to edit audio from a video clip. I have figured out how to use the lasso tool to select a part of the audio I want to fix, then I used auto heal. However the auto heal is not staying on the clip. If I save the audio, it's just the original audio when I play it back. I can't figure out how to make the auto healed selection stay as part of the final product. I've watched videos where people use the auto heal tool and I'm not doing anything different as far as I can tell. My selection will also disappear if I click outside of the shape I lasso-ed, even though I already applied auto heal to it.

Hi, I've been recording podcasts for over a decade and when I started it was simple to edit as I used a Roland field recorder where the only talent speaking was me, and doing so on loction where background noise was desirable. Now I record a podcast with my partner in a 'studio' (background noise not desirable), which we video as well. Audio is recorded via two lavs on two Tascam DR10L units. I sync these two channels to the camera's audio, and then go through the painstaking task of manually ducking each track. This means cutting track one when track two is speaking, and vice versa. It works well but an hour-long podcast takes literally hours to edit this way. I've not done any auto-ducking on speech before and I am not sure if there is a feature in Premiere Pro or Audition that could assist me. Bear in mind the mics are picking each others' voices up, so I'm not sure an auto tool could differentiate between the talents, but before I go any further, is there a feature w

When I select the scrolldown menu to select "add sidechain," the option is no longer there. It used to be there, but now you can only add a bus. Did I do something wrong?  

I can't for the life of me figure this out. I've tried Googling, and I've read the documentation but can't find out how to do this. In Audition, when you click the Back or 'Move Playhead to Previous' button, it jumps back but stops at every single cut along the way. Is there a button to jump the playhead to the start of a session? In Ableton Live, you do this by double clicking the STOP button. 

For some reason, the toggle to make low and high shelves to make the curve softer/more prominent in the Audition Parametric EQ isn't working. Clicking in the curve button doesn't do anything, and it's stuck in the curve form from the last preset loaded.Is it a known issue or something wrong with my installation? It's been working fine until some days ago that I tried it. I have a couple of third party EQs but I'm really used to and really like the Audition stock one. Thanks!