Bridge

I just purchased a new 2021 iMac; running Ventura 13.0. I've installed the latest version of Adobe Bridge, and the thumbnails from my desktop (folders and files) will not load, making the software essentially useless. The spinning pinwheel just goes on for literal hours. I've purged the cache, uninstalled and reinstalled, downgraded to the previous version - all to no avail. Anyone have any ideas for a possible fix?  

I'm really getting frustrated with this new release of Adobe Bridge. Tonight, I tried to assign some keywords to stock images by selecting an image and checking the keyword, which I assume is how you do it. However, as soon as I selected another image and then went back to the previous image the already assigned keyword was unchecked. What the heck? Another bug?

Latest version of Bridge will not open on windows 10.Have not found any solutions that fix the problem. I have tried uninstall and re install with no success.Please help!

Anyone familiar with this problem? My comuter is new MacBook Pro "15". Solution?

Whenever I open a file in bridge it loads all the images correctly thank quickly turn each image green and the preview green as well. I have completely reinstalled bridge and got the same problem, this happens with .jpg and .cr2, which both I have never had a problem with in the past

Not possible to search for images by file size.E.g. I enter 80 000 kb, but Bridge change the number and search for 78 kb

Bridge 2023 13.0.1.583MacOS 12.6.1PS 24.1.0 1. I have many files in different folders where I stack individual images and their "components" )tiff, NEF,jpg_ in one group per imageWhen Bridge now closes in one or more folders many groups are magically UNGROUPED by themselves All by themselves.  2. If I remove an image from a group the count no longer decrements I have to instead UNGROUP the entire group and restack / group to get the count to be correct

Todays issue was the final straw. I imported 437 photos (half raw, half jpeg) into bridge and attempted to batch rename all of them. After pressing ok, the loading dialouge box would appear, then nothing would change. No files have been renamed. After repeating that multiple times, I selected one photo and renamed it successfully.  After that success I selected all of the photos again and I attempted to batch rename them. This time after I pressed ok, it corrupted all of my raw files and renamed my jpgs to "Dec22(sequence #)". I formatted my cards after putting them on my drive and now all of my raw files are gone. This is bad... obviously. Any help would be greatly appreciated as I pay monthly for a service that doesnt work on the regular. This is just one of the many issues that I have expereience recently.  I attached a screenshot of how batch rename somehow changed all of my raw files to an unsable file. 

Hi all,If I open a group of photos in Adobe bridge and select a photo (or all photos), then right click and select "file info" the "basics" panel shows my copyright info for 2021. I have created a template for 2022 and 2023. I then have to import the 2022 template to apply the correct date to current files. Is there a way to set the 2022 template as a default, so I don't have to keep importing the correct template? I will need to then change it again in 2023. Thanks in advance.Paul

Bridge won't open some RAW files in both CR2 and CR3.  the same files do open from Finder  MAC 12.6.2.For the files that do open in Bridge, sometimes adding metadata works and sometimes I type in metadata or click one in my master list and get-- So I did meta in LightRoom which is a huge pain because the keyword list there is a lot more strung out.Then i tried to rename in Bridge and my RAW files have disappeared. This is all I can get in the Bridge window. RAW files are also gone from the Finder desktop folder. xmp are still there. Also Bridge will no longer rename in the same folder. I get SEQN instead of the seqence number. I called about this three times about 7 years ago. Still not fixed so I have to ssend the rename to another folder.  In the filters panel, all stay checked even when i uncheck all I don't want. I want File Types but they won't show. workflows don't show my saved ones except for keywords mine.I've closed and reopened Bridge. Restarted computer. Have

after updating i see the external memories but i can't open them and see the files with the photos

I am running Windows 10 with 8 GB memory on a lenovo z70.  The photos are on a samsung external HD. I have applied most or all the fixes posted on this forum without success. When I move the photos to the internal HD, I have no problem assigning keywords.

Mac Studio 2022, Mac OS Monterey 12.6.1 When I view my files in the Finder, the dates are correct.When I view some of my files in Bridge 2023, the date is changed to 1/1/1904.Please help.  Thanks

I edit my Sony RX 10 IV 20mp ARW ==> DNG images in CS6 Bridgeby pressing space bar ==> full frame, left click ==> ?100%? to check forcamera shake, focus, etc.  Left click give full frame 100% portion...(note: I use Photoshop 2022-3 $9.99/mo but old Bridge for familiarity)It takes 15-30 sec per image to finally get an unpixelated 100% image using:Thinkpad P40 Yoga Signature EditionDevice name        DESKTOP-FITKV5VProcessor             Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz   2.81 GHzInstalled RAM     16.0 GB (15.9 GB usable)System type         64-bit operating system, x64-based processorEdition   Windows 10 HomeVersion  21H2Installed on          ‎2/‎3/‎2021OS build 19044.2364Experience           Wind

I tried uninstalling and installing CC, but I am continuing to get the below error in Bridge and Photoshop.

I cannot find an answer to this anywhere on this forum.How do you search for photos contain 2 specific keywords?thank you.

While switching back and forth between Bridge and Photoshop, the mouse pointer vanishes.  This seems a random event. Anyone have a workaround or also experiancing this? I tried turnig off GPU acceleration and that did not help.  Unfortionatly I didscovered this intermitant bug after I had uninstalled Bridge 2022.  How can I get it back?

Hello dear representatives of Adobe. My name is Vitaly, I am a photographer with more than 15 years of experience, I have been using your software all my creative career. Most often I work in the Adobe Bridge program. With the purchase of a new camera, it became necessary to update the software, as new NEF files require a new version of Bridge. And then I discovered a huge failure in your software. I think the interface design is just terrible. The convenience of the interface can only be compared with a leap into the Stone Age. All the tools are located so inconveniently that it would be more convenient to take pictures with your feet instead of your hands, and look at the camera screen with your ass, than to use the new version of Bridge. You can ask me what version of the program I have or when I downloaded it and something else, but this will not save you from employees with hands growing out of the ass. I will pray to the Lord that the employees who did the interface design experi

I have had this problem for awhile and am now running CC 2017 and I just organized a lot of files by grouping them and naming them and then as soon as I come back to the folder, its all undone. It also does not stay consistent from my work computer to home. This is super time consuming and a very big issue. Please help.

Newest version: 13.0.1.583 in contnet window can not scroll using page up and down. Anyone else see this?

Cuando abro bridge 13 se ejecuta pero casi de inmediato me da el mensaje: Las instancia del dispositivo GPU se ha suspendido. Use GET DEVICE REMOVED REASON para averiguar cual es la accion adecuada.Despues de este mensaje se cierra el programaQue debo hacer para arreglarlo

Upgraded from Bridge 2022 to 2023 yesterday and I now receive this error message: The GPU device has been suspended. Use GetDeviceRemovedReason. Any help will be appreciated.

Anyone else notice that if you drag a file from one folder to another  in Bridge the folder tree reverts to a view from the Desktop?

Hi,   I am having a nightmare with Bridge since upgrading to the newest version.   The issue seems to be caused when I try to use one of my contact sheet templates on the 'Output' section and only relates to one, single, template. All other templates are fine.   When I select the template, I get the error message "Unknown error; quitting application" and the only option is to click "OK" which quits the program. Nothing else can be done. When I restart the program, the same screen appears and the error comes up again immediately.   I now have a workaround that involves deleting Bridge preference files and restarting my Mac but if I accidentally select the bad template when using the program, the issue begins again and I have to repeat the whole process, which is time-consuming and frustrating.   I am unable to delete the offending template as in order to do so, I have to select it, which causes the crash.   If anyone is having similar issues or knows of a

As soon as I use the space bar to open a single file to fill screen, the screen starts flickering. Nitrosense indicates GPU more than 70% even though I have the setting at reduced. Screen eventually starts overlapping like I'm running multiple monitors at once... I don't think I am.Have deleted and re-istalled twiceI've since rolled back to Bridge 2022 and have no issuesBecca