Bridge

To change the file names, I have some adjustments, like:Adding a sequence number before the name file with two digits.Adding a sequence number before the name file with three digits.Eliminating the original numbers at the begining and replacing with my customized numbering.Eliminating all numbers that has nothing to do with the file name, unlessit is a song that says “12 inch”.Eliminating all digits, except the “3” and the “4” if they are at the end, for mp3 and mp4 files.So,  all these adjustments and more were saved like customized adjustments for file names. In Bridge 2022 I have to set up again all this. Is there a way, for the future, I can save these settings in the creative cloud (like the brushes in PSD or the keyboard shortcuts in Premiere for example). “Import Preferences from your older version”??? Something like that? Orientations, please. 

I recently just bought a new Macbook pro with the M1 pro chip and downloaded bridge to access my one drive folder, but its not opening. I previously had a windows device which was able to open the cloud one drive folder on bridge. I am not sure if this is a glitch or just the M1 pro chip isn't compatible with Bridge 12.0, which is wierd because when I was downloading bridge it said it was compatible. Can someone please let me know whats up? Because bridge is an important app for me as a designer. Thank youVishek  

I've installed Bridge 12.0.1.246, and wanted to use it as link to an older PSCS6 (13.0.1) - this version of bridge tells me that my CS6/ACR is not licensed. I can continue to use Bridge 5.0.2.4 perfectly well... thanks

SOmetimes when applying Assigned Keywords to multiple files, almast all metadata in the selected files gets nuked (Caption, Location, Copyright etc.) and only a few keywords assigned remains. This happens sporadically. Doing a purge doens reveal/redisplay the lost metadata, they truly are gone. It happens in Bridge 2021 and 2022, running Mojave and Catalina (various versions). I've tried to reset pref's as well, no change. Kind of unsettling that metadata just gets nuked like this, the only solution so far is to not use Bridge, but Photo Mechanic instead. Any solutions or suggestions here in community-land? All the bestMichael

Literally just started today.  This is part of my workflow and this is a tremendous pain.  There are no available updates so spare me that abdication of responsibility. Anything under the Tools > Photoshop dropdown menu from bridge does nothing.  Photoshop doesn't react.  I can run Image Processor from within photoshop, and it does indeed run fine.

Batch rename is the Adobe Bridge tool I use with every image I have.  I've just added it to a laptop for use on a vacation trip, and the renaming tool is severely crippled.  Only categories of text appear.  The many useful other naming categories—date, time, number, etc.—will not appear.  What has Adobe done to cripple its wonderful, highly usefukl program? 

EN > I have a 2020 Mac Book Pro with Apple M1 processor, Monterey 12.0.1 operating system and 16 Gb of RAM, and I can no longer use Adobe Bridge because it is so slow that it is impossible to use. The generation of the photo previews takes tens of minutes... Bridge is updated to version 12.0.0.234. With the M1 processor I have had enormous difficulties with all Adobe software (especially Photoshop) for sudden errors and crashes, and they often freeze as if they have no memory... Working with the Adobe world has become hell. In the FAQ I have not found anything that can help me solve at least the most serious problems that prevent me from using Bridge. Anyone how to help me?IT > Ho un Mac Book Pro del 2020 con processore Apple M1, sistema operativo Monterey 12.0.1 e 16 Gb di RAM, e non riesco più ad utilizzare Adobe Bridge perché è talmente lento da rendere impossibile l'utilizzo. La generazione delle anteprime di foto normalissime richiede decine di minuti... Bridge è aggior

 Bonjour,Je viens d'installer Bridge sur mon nouveau macbook Pro puce M1 et Bridge est d'une lenteur inimaginable en 2022.Les photos mettent 5 voir 10 minutes pour charger les vignettes,il faut 40 secondes juste pour attribuer une étoile sur une vignette,...Je ne comprends pas?Pouvez vous m'aider?Cdt.

Can someone please explain to me how to remove keywords from within Bridge. The Manual says:   "To delete a keyword, select the keyword by clicking its name, and then click the Delete Keyword button at the bottom of the panel or choose Delete from the panel menu." When I do that, about 15 to 20 seconds later the keyword reappears. In fact, in most cases if I've deselected the keyword (cleared the box), a few seconds later the box becomes rechecked again on its own. I can't turn it off. I have repeated this process now literally 100's of times and the results are the same. So far the only way I've been able to actually delete a keyword is to select all the files in a folder and click on the box to the left of the keyword. Typically the keyword is at a "-" state (only some files have that keyword applied) so clicking it applies it to all files. I then have to wait quite a few seconds to close to a minute or so while the metadata finishes writing. Then I need to click

Hi Adobe. Usely then I rename files in adobe bridge, I am able to select the hole name and click left arrow key to move to the start of the text field and right arrow key to move to the end.But in the 2022 version this has stopped working and when using the arrow keys it will always just move med to the right side of the dot. This is acturlly a big annoyance for me, because if i have to change or remove the first few words in a bunch of files, then i now have to switch between my keyboard and mouse every time i select a new file.  I can't see any logical reason for this change, so i am hoping that it is just a bug, that you will consider fixing in the near future. Thanks 🙂 

Thumbnails and previews do not display correctly on M1 Mac. Thumnails and preview window when scaled down exhibit, jagged diagonal edges, strange image areas that are zoomed at diffrent levels. Incorrect display of layers. Full screen previews display correctly.  There does not seem to be a combination of preffrence settings and or quality settings that fixes this issue leading me to belive this is issue with the graphics engine. "use software rendering" smooths the previews out. But does not fix the display issues.  

Intento previsualizar RAW en Bridge y por alguna razón las imágenes se vuelven blancas con lineas de colores o la misma toma se "rompe", se desfasan los colores y no se puede utilizar en ninguna otra app (ni photoshop, lightroom, bridge e incluso capture one) 

Thumbnails of newly created jpegs are over saturated and distorted e.g. a 1x1 cropped jpeg is shown in portrait format with side edges cropped off.  I have set preferences for software rendering and have then cleared the cache for the folder containg the distorted image.  When the thumbnail is regenerated it apears creectly for 1 second before being distorted again.  All images created before this update are OK.  I am using Bridge stand alone and ACR and photoshop are not licenced.

I've been having an issue only for the last two months opening NEF raw files in lightroom and bridge. Through trial an error I find that I can import the NEF files into Lightroom Classic but only if I DON'T try to open the folder in Bridge first. If I try to open the files in bridge first (which I usually do to sort my images into subfolders to make them easier to organize) then lightroom doesn't recognize the files.  Anyone having this problem? I'm running Version 9.2 on Bridge & Lightroom and have the latest Camera RAW, I can't upgrade any further because my computer isn't compatible to upgrade my OS past High Sierra 10.13.6. Please help! The only temporary fix I have atm requires me converting everything to DNG and that takes hours.

I'm new to Bridge and do not have a server for tracking file revisions or branches. Imagine that you have a photo from some years ago and now you've created four wildly different variations within a couple of different apps, but all use the original as the primary basis. Maybe one has been turned into minialist vectors, another painted over the original photo, etc. How would you use Bridge to link these 5 files together so that they don't get separated, or at the least are permanently associated and easy to pull up together in Bridge?

Help please. I've been working in my new version of Bridge, but suddenly, the tabs/panels on the left-hand side have changed, and I can no longer access the view that shows me the labels & ratings-  i.e. how many files are red, yellow, green etc. This is the only way I can edit my files as I neede to filter them by label, but this is now impossible. I've wasted hours searching all over Bridge but have no idea why this view has vanished nor how to get it back. Please see screenshot - I have a bunch of useless tabs in that panel - metadata, workflow, collections,  export - but nothing showing me the labels. I have ticked 'labels' in View, so surely they should be visible? They were there earlier today, so I don't understand what's happened to them. I would be grateful for any advice as to how to get them back, and also how to make Bridge more stable so it always keeps the same workspace properties all the time! Thanks

Hi All,  I shot some stills with my Sony A7SIII and didnt realsie it was set to use Slog-2 in the picture profile settings (as this is what I use for shooting video).  Now when I bring the .ARW files into bridge it appears to briefly show a flat log image and then 'corrects' this with a very heavy crushing of the brightness. This is how the previews of the files remain within bridge and it is applied to any file you scroll to onscreen.  I know the log information is there in the files (as I can brielfy see it before the 'correction' is applied) but how do I deal with these files to get them correctly showing in Bridge to make assessments and then take the into Photoshop? This is a mystery and I cant find much info about shooting stills with Slog so I hope someone can help. For ages, the general opion was that Picture profiles did not affect shooting RAW stills on Sony cameras ... but it is now proven that it does indeed affect the gamma and I think Br

When I use no keywords in the filter, to select the photographs that do not have any, and I want to insert more keywords for the same image, it happens that after inserting the first one the image disappears and I am not able to insert other keywords. Is there any way to fix this? 

Please help me. I want to search into my whole hard disk ONLY the B&W photos scattered into hundreds of folders and subfolders. Don't know anything about metadata, but they are scans from old analogue pictures. Bridge can find only 5 B&W pictures but I know they are thousand! maybe those 5 are declared B&N into the file info, but I need the software to recognize the "absence of color" more than the file properites. please help!

I cannot merge photographs from Bridge or from Photoshop v 23.2.2. I urgently need to remedy this.MacOS Big SurThe following error code displays:I get the attached image

Hallo zusammen,im Zuverlässigkeitsverlauf Windows 10 erhalte ich ständig die Nachricht Adobe Bridge funktioniert nicht mehr, obwohl ich keine Probleme bei Anwendungen in Adobe Bridge feststellen kann, alles läuft reibungslos! Mich macht die Meldung aber nervös und ich wüsste gerne, was die Nachricht zu bedeuten hat.Ich sende mal ein Screenshot mit.Über eine Antwort würde ich mich freue 

Until recently when I ran a keyword search I would receive all pictures from all folders in my remote hard drive that had the keyword attached . Now the search is only occuring in a folder that I highlite an not looking at all folders within the hard drive .   [Moderator moved to Bridge.]    

I am trying to convert raw to jpeg in Bridge and it keeps saying to "update photoshop". I am completely up to date

I would like to set up sp=ome Custom Workflows in Bridge but am getting an error.As soon as i click on the Workflow workspace at the top of the screen, I get an error box showing "The operation could not be completed. The system cannot find the path specified"I have tried reseting the Bridge properties and uninstalling / reinstalling, but still have the same issue.Any thoughts?Dave R

I want to delete and reinstall bridge because it is very slow, but I want to keep my collections, is that possible ?