Bridge

These are changes that would put the polish on what I think will ultimately be a very good version of Bridge. 1. With a complex Workflow, it is useful to reset it quite often, once it has strayed from it's default state. It would be great to have a shortcut key to do the reset. 2. The Tabs are not as visible (GUI style) as they could be and do not need the word 'Content' taking up space and obscuring the folder names. 3. The navigating areas of the top of the window (tabs, columns, works spaces, etc.) don't natively look like something to click on. The Application Bar, Folder Navigation Bar, Workspaces Bar, and Tabs, Look like the Columns and File Content.What happened to designers using column header clors, and 3D effects etc.? Does everything have to be FLAT? 4. If all the photo files have identical filter properties (nothing to differentiate) the Filter panel is empty, as it has been for a few versions now. I prefer the older versions that would at least show you

Since down loading Bridge 2023 today, it does not open with one click from the dock on my Mac, previous versions always did. Ps always does even now with 2023.Its anoying, so can a quick tweak sort it please.

The new content tabs may seem a good idea, but not at the expense of opening a new window (or instance of Bridge). In my workflow, it is critical that I can run between 3 and 6 instances of Bridge across two monitors. This is to quickly and efficiently compare different folder (Illustrator, PNG & PSD) sets across different cloud services (OneDrive & Dropbox) for version control in a massive multi-volume publishing environment. I've tried undocking tabs and carefully arranging them across two monitors and then saving the workspace, but it's horrible with just three - to get six arranged and usable, I probably need another two monitors. Before Bridge 13, it just worked perfectly; now it's a horrible mess 😞

Issue in Bridge CC when doing a batch rename renames the files but they have no file extension after.Ex. 12345.jpg  becomes 12345  (unknown file type)Another rename step must be done to add the appropriate extension afterwards. Otherwise they don't know which program to open with.Has anyone encountered this? Solution?I don't want to enter a "new extension" field each time because I rename different file types each time, and it should just work like it used to changing the prefix.

Hello people,when double-click on a photo on Bridge, it automatically opens lightroom,before the image was already selected on Lightoom, so I clicked on import button and that'it.Now it just launch the import window on Lightroom but the image is not selected anymore, so i have to find it out.Do you have the same problem?I have updated both software alreadyThank you for your help 

The solution posted of Launch Photoshop, Quit Bridge, then Relaunch Bridge does not work.  I am trying to copy developement settings in Bridge.  

Should be renamed Bugg hell 2013.So angry with all buggs and fails to this upgrade. 

When Bridge 2023 is exited, with (x) or via the menu, it can't be run again.It is still running in the background and cannot be restarted until that process is terminated via Task Manager.Also it seems that the workflow (screen layout) last used is not reopened as it normally would be - the settings are not saved.This behavior occured after I removed Bridge and Photoshop from my pc to make a fresh installation - (due to an error in Photoshop). I have not experienced this behavior with Bridge before.Running under Win 11 on a Lenovo Laptop-6TFDNSO9, installed 8 GB RAM, total virtual memory 22.8 GB.

Hi all, I just updated to the latest version of Bridge (13.0.0.562) it is very slow and laggy. Is there a known issue and if so is there a solution?My system spec and a screen shot of Task Manager whilest Bridge is running and displaying 11000 thumbnails is attached, this was never a problem with the previous version. The CPU usage spans fro 25% to 75% without any input from me.Also, why do I see multiples of apps such as helper running simultaneously?Thanks, Dave.An update, I just reinstalled V 12.0.3.270 and it's off like a racehorse, clearly the issue is with the new version.Regards.

Hello everybody,with Win 11 I would like to add to the context menu the item "Open with Adobe Bridge" for all supported files, without having to go to the "open with" menu, but from the first window that appears, is it possible?Also I would like to add the item "send to mail recipient" always from the first menu, with win 11 I have to click on "show other options", then on "send to" and then select "mail recipient", it is quite inconvenient. Both are 2 options that I use very often.Can anyone help me?

HiI am sure someone has asked this question before but I cannot find it.How do I reset to the default layout in Bridge? Thanks /Paul 

Bridge will recognize my 5 tb drive hooked to my pc with a cable but will not read any files or folders. I can import them into Photoshop with other programs, so the drive and cable seem good. Help!

Quando tento puxar um preset de texto no Bridge para o After está aparecendo esta mensagem. Alguém tem alguma ideia do que está acontecendo?[Macbook Air M1 com MacOS Ventura] 

When scrolling through large sections of folders, it feels and looks like you are scrolling the opposite direction.  When scrolling down, it moves the lower folder one space higher than the previous which creates a weird animation effect that makes it look like it's scrolling the wrong way!  In previous versions, this was alleviated by switching from Grid to Thumbnail view.  But for some reason this new release makes it happen on both.  Am I the only one seeing this? It's driving me crazy. 

I noticed a few weeks ago my Drop down arrows disappeared inside bridge. I did some digging on this site, you tube and so on and have no found the answer. I did a factory reset on my bridge.  This didn't solve the problem. I find it hard to work within my folders without the drop down arrow. What is the answer to reseting this. I see some have them some don't. Usually a folder inside a folder would create an arrow. I could click on the arrow and see what was in the folder. Another arrow would tell me there was a folder and there is items inside the folder. No arrows usually tells me there is no items in the folder. I have no idea what happen.    

Yesterday I reported the flawed preview system in Bridge - today I find another preculiarity.  When backing up a folder to my portable hard drive by dropping and dragging, Bridge deletes the folder from my PC.  Ok it's on the hard drive but to keep it in both places I have to use the "copy to" command.  But this isn't consistent - sometimes Bridge deletes the source folder and sometimes it doesn't.  I really think Bridge 2023 needs to revert to 2022 while all these silly little issues are sorted.

I'm new to Bridge and I have no clue about it, since this is the first time I use it.Therefore I'd appreciate a detailed instruction - thank you! 😄  I have a big folder with many sub-folders which contain photos. The folders containing the photos are named after the date when the photos were taken, in this format: YYMMDD (e.g. 221026) Now I want to replace the (wrong) date metadata of the photos with the date from the folder name, using some automation/script.  How would I do that?Thanks a lot in advance!

So this is the latest documentation I can find. You'll note that you have this API listed three different ways: copyTextToClipBoard CopyTextToClipboard CopyTextToClipBoard But none of them work! All throw an error "not a function".   Please advise.  

Modifica in Camera Raw non attivata - la modifica in Camera Raw richiede che un prodotto originale disponga di una licenza attiva.Perché????Ho già provato a chiudere e riavvavviare Photoshope Bridge

Hi,since years I'm on CC and start Camera Raw from Bridge. Since today it does not work. Instead I get."Bridge displays the Camera Raw editing is not enabled" And no, this is not working: https://helpx.adobe.com/bridge/kb/camera-raw-editing-not-enabled.html All Apps and MacOs up to date, all things google brought up testet. Hope for helpJohannes

I've been using Adobe Camera Raw since it's begining, and I've been using Mac OSX since the beginning. We use to have the options of never seeing the xmp files as they were automatically hidden if you choose that in preferences. Sometime in the past 6 months the xmp files are showing up and giving me headaches.  I want them. I need them. But i do not want to see them... ever. I do see that if you want them hidden, then one option is to change your raw to dng, but i don't want to do that. I want to edit my .nef in ACR.   First question:  Why have we lost the choice of hiding them?Second question: Why does anyone need to see them in their file directories anyway?Third question:  Is there anyway to hide a specicific file type like .xmp on OSX?

Is anyone else having this issue? I have just had the latest InDesign 2020 and the latest Bridge 2020 installed at work. I run Windows 10. I could previously use Bridge to place images into my InDesign docs using the right-click context menu but now this feature does not work. Nothing happens. Drag and drop does work but this is not ideal. I have reset my File Type Associations in Bridge but this doesn't seem to help. Bridge places files into Illustrator or Photoshop ok, but not InDesign. Any ideas? Thanks.

UPDATED COUPLE OF DAYS AGO..... WHAT A MESS..... WHO DID THIS UPDATE?? LOL!! MUST NEVER HAVE USED IT!! OR GIFT FOR HALLOWEEN? COME ON GUYS!! REVIEW YOIUR COPY AMND GET BACK TO US WHEN YOU'VE UNDERSTOOD TJAT AN UPDATE IS SUPPSED TO MAKE OUR LIVES BETTER1!!!CHEERS

I want to be able to use the up-and-down page keys to scroll through adobe bridge. I can scroll using the mouse but not by pushing the upper down key.

Hey everyone! Our team uses bridge to communicate which images are selects and comps between art directors and retouching through the label function (ie red is a select, yellow is a comp). All images are exported in both Hi Res PSD (for the retouchers to use) and Low Res JPEG (for the ADs who struggle to load the PSDs). They have the exact same filename - it's just the fily type that's different. Often, it's only the JPEGs that get selected and not the PSDs, which slows down our process of finding the selects.  Is there a workflow or script that could be used with Bridge to copy labels from a JPEG to the PSD with the corresponding file name? If so, how would we go about creating this? Thanks!