Bridge

I am using Bridge Version 10.1.1.166, which I believe is the latest version, on a Windows 10 PC. When I have finished editing my RAW files I can convert them to JPEG from Bridge in two ways (maybe there are more than two ways but I am not familiar with any others.)Method 1: I select my images in Bridge, go to Tools>Photoshop>Image Processor and choose to save as JPEG with options set as required.Method 2: I think this may be relatively new, well it is to me! Use the Export Panel in Bridge I drag my images onto a previously created preset which is set up to export as JPEG with options set as in Method 1. There is no option here to convert the colour profile to sRGB IEC61966-2.1 but that seems to happen by default using this method. I like this method as it does not involve opening Photoshop. Both methods work fine but I see one difference which is that Method 1 produces JPEG files with the file extension "jpg" whereas Method 2 produces JPEG files with the file extension

While many applications use caching for speed of operation it does add a limit to the manageable size. Bridge 2020 version does not handle the notification of running out of cache resources too well. As cache use is accumulative, the size of the batches are proportionally reduced with each run until Bridge gets bogging down or even freezes. It would be nice if Bridge could indicate when it is time to clean out the cache before reaching this stage. Once Bridge becomes unresponsive I must resort to the kill application function on my system. When Bridge is restated the cache is empty. Unfortunately that often means reselecting a new batch and sometimes even building a new search index. To ensure I don't lose any file keyword metadata in the process I usually create a collection from the selection to fall back on after killing Bridge and starting it up again. I really need more computer resources to cover the batch volumes I am working with... but that's another story.

how do i get Bridge to work with no internet 

After upgrading to OS 12.3.1, the latest version of Bridge cannot see subdirectories on external drives. The files are all there and can be opened by Photoshop / ACR. I was using Bridge immediately before the installation and immediately afterwards it could not see the subdirectories. Bridge has all the pernissions necessary to access the drive. Any thoughts?

When I try to load multiple NEF (RAW) files as PS layers from Bridge i.e. Tools/Photoshop/Load Files as Photoshop Layers I get the following: "Instal the latest version of Photoshop to continue" I have the latest version installed !

CS6 Bridge.  The default in viewing my thumbnail photos is Generate Quick Thumbnail.  I want to change the default to Generate High Quality Thumbnail. If I right click on Generate Quick Thumbnail. it will change to Generate High Quality Thumbnail for tje thumbnail Any suggestions?

Hello, Ihave Premiere, photshop, Bridge an Encore CS6 paid license which I perfect for my use.Suddely I do not have previe thunbnails from my Canon MXF videos in Bridge CS 6 anymore on My OS Windows 10 pro 64 bit Laptop.. I looked for a solution on Adobe, but the only thing Abdobe wants you to do is take a cloud subscription.However I want to keep using my CS for which a paid a lot of money.Also all CS6 update page are gone, you canont find any download software / updates for CS6 on adobe. Why???? Can anyone help me to get the MXF tumbnail previews working in CS 6. On my other PC which is runing on OS Windows 7 Pro 64 bit, the MXF previe do work in Bridge CS 6

When I use Adobe Bridge's "Export Custom" panel to export Illustrator (.AI) files I get this error: unsupported file formats. Does anyone know what has changed from about three versions to now?In Bridge version v10.0.0.124 it worked smoothly with .psd and .ai. But after this version it only works with Photoshop files(.psd). 

Hi,I'd like to rename new photos on the harddisk.I prefer the serial number (01, 02, 03...) and then the date the picture was taken eg 2017-05-12.So I need a form like yyyy-mm-dd, but in Bridge I  only can chose yyyymmdd.I also can't rename the files with Lightroom,because when importing them I only add them to the catalogue and don't copy themSo what can I do?Thanks.Kind RegardsRonald

Using latest release as of today. Edit/Find will not find files by Star Rating or File Name. The drop down for file types does not work. No drop down appears when trying to search for a file type. Trying the suggested fixes did not work. Reinstalling does not work. Running Windows 10. Bridge often crashes 

currently use Adobe Bridge 2019how can I still install the older version Adobe Bridge 2020, I currently still have the Mac Os High Sierra 10.13.6 on my MacBookAir 2011.Unable to upgrade the MBA !!!

Hello Adobe Community! I am attempting to assist a person who is troubleshooting an issue he is experiencing using Adobe Bridge. I have searched the community posts and did not find a solve for this. Using CC Adobe Bridge on a iMac connecting to a Windows server via smb:// where the RAW camera files are stored. He selects the folder and the RAW files display in the filmstrip on the bottom of the Bridge window where they are listed smaller number to larger from left to right. He will then select the image from there to Preview it. If it is one he wants to keep, ha makes no changes. If it is one he wants to trash, he marks it with a single star. Then when he has completed the evaluation of the photos in this folder he will select the single star photos so they all show in Preview and trash them from there. The issue he experiencing is that while he is going through this evaluation process in Bridge, duplicate files will start showing up in the filmstrip. It appears to be c

I have the latest Mac operating system installed and Bridge 2022 latest version does not open.

I have run into a problem which I can't explain.  I haven't changed anything I am aware of but suddenly I cannot Batch Rename in Bridge unless I save a copy to another folder elsewhere.  This wouldn't be an issue, but then I have to add this new folder with the rename to Bridge, and the old files on my SD card remain unnamed -- just adding a lot of extra work on my end that I have never had to do.  Please see screenshot below to see what my Batch Rename window looks like (Windows 10), Adobe CC.  I have uninstalled, deleted all preferences etc as well as cleared my cache. 

I am updating keywords on files stored on a gate Exeter always hard drive. I have everything backed up on another EHD. Recently I realized that that Copies of same files were not being updated and my keywords stopped traveling. I exported and imported my keyword hierarchical list. I updated to Bridge 9.2. But nothing is working. eould Appreciate any help.

I have just Updated tp Bridge 2020. when trying to batch rename I am unable in Destination Folder section to select, Rename in same folder. The only option availabe is Copy to other folder.I have tried to find help on Google searches but nothing is specific for not being able to select the Rename is same folder button. Except that it should be availabe.I did look into folder permissions to make sure I could read and write to the folder and those permissions are OK.I did close Bridge 2020 and opened Bridhe CC and the Rename in same folder works OK.So the problem is in 2020. I have also Reset the Bridge Preferences. The problem still exist.Help will be appreciated. Thank You.

I want hide only file name but not other infrmation. If I want look only picure I can of course check "thumbnails only". But now be only picture.But I need see labels, rating or other info I choice in Preferences->thumbnails->Details. Can you help me?

I am currently using this script I found elsewhere on Adobe forums. However, doing this function only will stack everything with the raw files on top. I am using a 5D MKIII now and Bridge CS4 can't generate the CR2 previews, so I need JPEGs to see what a file is for general editing. How do I get this stack script to put the JPEGS on top instead of the raw files?(script originally posted by Paul Riggot in another forum)#target bridge      if( BridgeTalk.appName == "bridge" ) {  AutoStack = MenuElement.create("command", "Auto Stack", "at the beginning of submenu/Stack", "zx1");}AutoStack.onSelect = function () {    stackEm();   }function stackEm(){app.document.sorts = [{ name:"name",type:"string", reverse:false}]; var jpgs = Folder(app.document.presentationPath).getFiles ("*.jpg");app.document.deselectAll();for(var a in jpgs){var Name = decodeURI(jpgs.name).replace(/\.[^\.]+$/, '');var stacks = Folder(app.document.presentationPath).getFiles(Na

Hello,  I'm supposed to install Adobe Bridge but the installation requires internet and this option is not possible in our organization. Is there any offline package that i can download and install ?Thank's in advance.Best regards !

Do you have to pay extra to download bridge?

The value string is missing in my run file for Adobe Bridge. What do I need to modify it to say?

Just wanted to have a small rant about a feature of the Bridge workflow export options which just caused me to waste £300.When I want to print larger than my actual image size my fine art printer recommends changing physical dimensions without resampling. They use a file with lower res but larger dimensions.So I had this layered PSD file which was 112cm x 84cm at about 218dpi and I wanted to upload it to my printers as a flat TIFF. SO I had this workflow set up to export files from Bridge to a print ready file saving them as TIFFS. What I failed to realise is that Bridge is changing the resolution to 300dpi thus lowereimg physical dimensions without me asking it to and without telling me.SO I upload this file whch I have diligently named with the dimensions included so I know which one to upload - 112x84. I upload to my printer and a few days later they send me a beautifully printed and mounted image which is 81x61 cm! When I check the file I sent - lo and behold - its now 300dpi and s

Installed Bridge but just will not start (64bit Windows 10) shows error "The operation could not be completed. Access is denied"Completely removed all Adobe products after running AdobeCreativeCloudCleanerTool.exe  with no improvement. Total reinstall after cleaning Program Files folders and common files but still exactly the same - has anyone any good clues on this ??Thanks 

Cannot get Photo Downloader to see me CFExpress Card with Bridge 2020, 2021, and 2022.  Adobe has not resolved.  Works fine if loaded through LR.

In an attempt to increase the font size, I went into the Preferences and increased the user interface scaling to 200%. It's so huge I can't process photos. So I went back into Preferences and user interface scaling is stuck on 200% and I can't change it back to Auto or 100%. I've tried Ctrl+Alt+Shift, clearing the cache, and disabling the startup scripts but nothing works. How do I get the scaling to change and how can I change the font to something I can actually read whether I'm using my laptop screen or laptop connected to a larger monitor?