Bug Reports

Zooming past 50% causes severe glitches (colored blocks/lines, see error1.png vs error2.png). Started ~10 weeks ago after update. Affects multiple similar files. Older versions work fine.

I am constantly plagued with this error message during normal working practices within Photoshop.“Could not complete the command because of a program error (2a135c.901).”During normal operation I’ll select any tool and it will randomly stop working - prompting the message above.  Or I’ll run an action and it will fail and prompt the same message..On a Save, Restart - Photoshop is back to normal operation - tools, brushes work correctly, actions play, until the message randomly appears again and the loop continues. save , restart …The pop-up “Learn how to fix” is irrelevant. It’s not a fix!I’ve tried all the other recommended fixes below to no avail. Please advise? Resetting Photoshop preferencesDisable GPU AccelerationGo to Preferences → Performance.Uncheck Use Graphics Processor.Restart PhotoshopClear Adobe CacheNavigate to ~/Library/Caches/Adobe and delete cache files.Restart PhotoshopMac Studio M2 Ultra, 64 GB - macOS Terrible-Tahoe 26.5.1 - Photoshop 27.8.0Wacom Tablet Intuos Pro (

I'm using Photoshop with a Wacom pen display (Cintiq Pro).When Photoshop is configured to use Wintab, pen strokes may show noticeable jitter at low canvas zoom levels (for example, 12.5%), especially when drawing slowly.Symptoms:Most visible when drawing smooth diagonal or curved lines Appears similar to low-resolution screen coordinate input Stroke position accuracy is reduced More noticeable at lower zoom levelsThe pen tablet seems to be behaving as if its tracking accuracy has dropped to the level of the screen resolution. In terms of actual hardware performance, the accuracy should be the same as Windows Ink.System:Wacom Cintiq Pro, and dual-monitor setup (total 3 monitors)wintab enabledPhotoshop :from older to recent version all

I'm using Photoshop with a Wacom Cintiq Pro and have noticed a UI issue when Windows Ink is enabled.Many Photoshop sliders become difficult to adjust with the pen.When using wintab , these are not happen.Observed behavior:Small pen movements are ignoredThe slider does not respond immediatelyMovement only begins after a certain drag threshold(about 10px) is exceededThe slider feels "sticky" or "magnetized" to its current valueabout 10 value magnetized move.Affected example:Warpadjustment panel sliderbrush size/hardness sliderNot affected example:opacity dialogliquify Because of this, making small precise adjustments with the pen becomes difficult.System:Wacom Cintiq Pro, and dual-monitor setup (total 3 monitors)Windows Ink enabledPhotoshop :from older to recent version allTo rule out tablet driver settings, Windows pen press-and-hold / double-click assistance features are disabled, and Wacom double-click distance is set to Off (0).

Adobe Photoshop Version: 27.6.0 20260422.r.11 4804c18  x64 (final, Release)System: Mac OS 15.7.3In this version the scrolling speed in the layer panel has drastically increased so its not usable anymore to scroll with the mouse scrollwheel.With a standard generic mouse using scroll wheel and moving it one step scrolls more or less 10 layers.With such a big steps in scrolling using the scrollwheel becomes not possible. User is resorted to use the side scrollbar which results in a drastically more time spent doing this function that is done 1k times each day.I have checked and nothing else on my system has increased speed so its local to Photoshop.Can some validate if they have the same issue as me? 

Phothoshop 27.8 (same error previously with 27.7). I'm trying to install the "Remove Tool advanced components" add-on through Adobe Creative Cloud (to use the new local remove tool), but the installation keeps failing with an "Installation Error" message (see attached screenshot), with error 127.Same bug if I try to install it inside photoshop.What I've already tried: Restarting Photoshop Restarting my PC multiple times Installing it from both Creative Cloud Desktop and directly inside Photoshop Retrying several times over the last 24 hours Unistall creative cloud with repair tool Delete adobetemp Increse permissions to adobetemp folder I'm using: Windows 11 Latest version of Photoshop (27.8) RTX 4090 Photoshop settings with image elaboration faster and performance with “use graphic processor” Has anyone found a fix for this, or knows what could be causing it?

Hello Adobe team,I am reporting an issue with Photoshop 27.7 on Windows 11 where the new Remove Tool on-device generative AI model cannot be enabled on an NVIDIA GeForce RTX 5080.The “Device” option remains greyed out, even though all documented requirements appear to be met.SYSTEM SUMMARYPhotoshop version: Adobe Photoshop 2026 / 27.7Operating system: Windows 11GPU: NVIDIA GeForce RTX 5080VRAM: approximately 16 GBDirectX: DirectX 12 / DirectX 12.2 availableNVIDIA driver: current and newer than Adobe’s stated minimum requirementPhotoshop GPU acceleration: enabledPhotoshop GPU status: GPU is detected and allowedAvailable disk space: sufficientThe GPU is usable for normal Photoshop GPU acceleration.The important detail is that Photoshop appears to detect and use the RTX 5080 for general GPU acceleration, but in the system information / GPU identification path the card is shown as:NVIDIA GeForce RTX 5080 UNKNOWNThis strongly suggests that the issue is not general GPU acceleration, but the

Bonjour,Quand j'utilise l'Outil Correcteur Localisé en cliquant avec ma souris sur une zone de la photo à l’écran, une multitude de lignes partent dans tous les sens. Donc cet outil ne fonctionne plus depuis plusieurs jours. Est-ce un bug ?

Photoshop closes without warning during editing of large Hasselblad TIFF/PSB files. Crashes frequently occur while using Magnetic Lasso. Event Viewer identified Nik Collection 8 Palette.8li as the faulting module in at least one crash. Issue persists after Photoshop preference resets and NVIDIA driver updates. Loss of recent editing work occurs. Photoshop 27.7.0 frequently crashes without warning during normal professional editing work. The application abruptly closes and recent work is lost.My workflow involves large Hasselblad TIFF and PSB files. Crashes frequently occur while using the Magnetic Lasso tool for detailed selections, although the crash is not always immediately reproducible.System:Windows 11 Pro 24H2 Intel i9-14900KF 192 GB RAM NVIDIA RTX 4070 SUPER Wacom Intuos Pro tablet Photoshop 27.7.0Troubleshooting already performed:Reset Photoshop preferences multiple times Updated NVIDIA drivers Updated Photoshop to latest version Verified GPU compatibility No obvious hardware i

Issue summary: Since Photoshop 2025 (exact version unknown, but after 25.12.4) direction-based brush strokes, when set in the brush settings (Shape Dynamics - Angle Jitter - Direction), are not working properly. The very first 'pixel' of nearly every stroke is angled about 90 degrees perpendicular, before correcting itself immediately as the stroke continues. This breaks a previously working workflow. The problem is only mitigated by using external stabilisation (I’m using Lazy Nezumi Pro with light smoothing), which suggests the issue is related to how initial pen input samples are handled at stroke start. I also ideally need to have 1% smoothing enabled in Photoshop, or the bug can lightly reoccur occasionally. Using older Photoshop versions avoids the issue, but this is not a viable long-term solution due to other compatibility and stability concerns. I have used these brushes for years with no issues until recently.Product and version: 25.12.4. (laptop) the bug does not occur in th

The latest version of Photoshop 27.7 seems to be missing the reflection removal option in the Edits I reverted to 27.6 and it's there in the Edits menu.. Am I missing something.? 

Version 27.7.0 / WIndowsI oftentimes add many guides (by exact percentage) to my documents.So I use the New guide pop-up.It was always a quick and streamlined process as the number field was preselected, I just had to write in it and hit Enter. Now I have to manually click in (or Tab into) the number field to be able to write my numbers.This is clearly a regression because of the new pop-up. So I consider it a bug.I think the Canvas Size dialog box already had the same problem, so you could consider it a feature request there and in every other pop-up too: Always the first input field should be the active one, not the OK button which makes not much sense.That could be pushed by hitting Enter no matter what part of the pop-up is active.Thanks for looking into it!

Photoshop 27.7.0 releasemacOS 15.7.7 Wacom Intuos Pro PTH-660Wacom Driver Version 6.4.13-4 Smudge Tool has a problem when using the Wacom pen and a soft brush with dynamics.select the Smudge tool Select a default brush with softness and shape dynamics settings (size, transfer, etc.). Hold the cursor still or move it very slowly; the Smudge brush position jitters constantly by a few pixels, making precise control impossible.Hard 0 % softness brush and a brush without any size or transfer dynamics, or using a mouse, works as expected. I have attached a video clip of the problem. Please see the link below:https://www.adobe.com/files/libraries/urn:aaid:sc:EU:60f57959-98f9-4985-ab48-b9d5812bf98f

Al momento de abrir la aplicación en Photoshop en la parte de Destacados existe un error ortográfico, debería decir lo mejor  

When I open Photoshop (Version 27.7) , the Adjustments panel disappears from my workspace’s docked panels. Also, when I try to open the panel from Window > Adjustments, nothing happens. The panel does not open, and no check mark appears next to Adjustments in the Window menu to indicate that it is active. The Adjustments panel reappears when I reset the Essentials Workspace, but the Adjustment Panel disappears again after I close and reopen Photoshop. Currently, the only way to restore the Adjustments panel is to reset the Essentials Workspace each and every time I launch Photoshop. This is not a great workaround because it requires re-customization of my workspace every time I open Photoshop. Could someone please help me resolve this issue? 

Adobe Photoshop Version: 27.4.0 2Operating System: Windows 10 64-bit When I go to Image → Canvas Size, the default is always pixels. I want it to be inches. Note: I have checked in preferences, units and measures, and the default is inches. Also when I go to image → Image size, the default is in fact inches, which is what I expect.  Is the default unit for image → canvas size now different? Is there a different place to set it?  thanks

The Generative expand function in my desktop Photoshop software doesn't work. My latest attempt at using it simple involved trying to generate new image either side of an existing horse image. I was following a tutorial provided in Photoshop called ‘Expand images with Generative AI’ (see attached image). When I try to use the Gen expand function, it seems to start processing but then an error message appears (attached). It used to work fine but it has not worked for over 6 months. This is the first time I have reported it. I believe it started malfunctioning after a routine Photoshop update.I am part of a business subscription plan so I believe I have the most up to date version of the software (version 27.7.0). I am using a MS Windows operating system Dell machine. Full details can be sent on request.

Dear Adobe Team, I am extremely frustrated with a critical change in Photoshop 2025 that severely impacts my workflow. In previous versions, when I set the interpolation method to “Nearest Neighbor”, Photoshop would retain this setting even after restarting. However, in the 2025 update, the software no longer remembers my chosen interpolation method, forcing me to manually reset it every single time I use the Transform (Edit → Transform) function. I am a fashion print graphic designer working for several well-known luxury fashion brands, and I rely on Photoshop for high-precision work on a daily basis. This unnecessary change is highly disruptive and drastically slows down my workflow. As a professional, I cannot afford to waste time adjusting the same setting repeatedly throughout the day. There is absolutely no reason why Photoshop should reset this option upon every restart. I demand that Adobe restores the ability to permanently save the chosen interpolation method for transformati

Photoshop 26.9 (just updated), macOS Sequoia 15.5, Intel MacBook Pro.   1. Drag with text tool to create large text box 2. Type a few characters, so most of the text box is empty 3. Select Type->Convert to Dynamic Text 4. Try to click and move the bottom transform handles   Expected: able to click and drag to resize bounding box Actual: cannot grab handle and text box is deselected   5. Change to Move Tool 6. Double-click text box to select and switch to Text Tool 7. Try to click and drag transform handles.   Expected: able to click and drag to resize bounding box Actual: cannot grab handle, text box is deselected, tool reverts to Move Tool

Using Image calculations in Photoshop 27.4.0 does not allow me to select second open identical image except for the colour space as a source, one is set to RGB the other (a copy) is set to CMYK in version 27.3.1 this works I've reset my preferences , restarted photoshop and disabled graphics card option still does not work… 

The recent 27.5 release got updated Canvas Size modal, and it has several bugs that affect my workflow, which requires gradual pixel-perfect changes of canvas size in various directions (my units are pixels most of the time).I use relative changes to canvas size, so ‘Relative to current dimension’ checkbox is ON for me most of the time, and in this case the bugs I get are:Canvas Size modal opens with default values of width and height set to 1 pixel. Should be 0. The width and height inputs do not accept 0 value — it gets reset to 1, meaning if I want to change canvas size in one direction, anyways I’ll get 1 pixel added to the other. It’s not possible to set negative values now, which used to work before, and at times it’s more convenient and precise way to ‘crop’ canvas, rather than using the Crop tool. The values step now is 0,01 pixel, which is meaningless in most scenarios. It used to be 1 pixel, and it should be, as it allowed to use keyboard up and down arrows for quick pixel pe

Summary: When using PS 27.7.0 the sky replacement feature is unusable as the sky will not be loaded and visible as a preview in your file while you make settings adjustments for it.   (temp fix utilized: downgrading to 27.5.0 regains sky feature usage confirmed)Description:  In 27.7.0 the sky won’t preview in file to see how settings adjust new sky fit.  If you just randomly choose settings and hit done/ok, it will then load the sky into your file.  But I was not able to see what settings were resulting in sky fit to image until after it’s loaded.  Then all you are left with is adjusting the two mask layers that are not as helpful as the sky replacement settings initially are.A coworker still only had 27.5.0 installed and their sky replacement preview still worked.  So I downgraded to 27.5.0 and now mine works again from that version.  I did not attempt 27.6.0 version.  Before downgrading PS version, I attempted to rule out graphic driver by updating Nvidia graphic drivers but did not

Since updating to 27.5 yesterday I’m encountering a bug where when I switch between channels of a Curves adjustment layer the active point is deselected. This breaks flow and slows down the process of getting the color right, which for me typically involves bouncing back and forth between 2 or all 3 color channels (working in RGB) and making one or two point adjustments with the arrow keys.  To reproduce:Make a new Curves layer Add a point somewhere in the middle of each of the R, G, and B channels.  Press Opt + 3, 4, or 5 to switch between the channels.  Prior behavior: you would still have selected and active the same, nth point on the curve. So, if you were on the Red channel and had tweaked a point in the middle, then switched to Blue which you hadn’t touched yet, you’d have the 255,255 point active since it was the second point on the curve. Once all three channels had a point though, switching between them would keep the midpoint selected for tweaking with the arrow keys. Current

The current version of Photoshop continues to have issues. Especially in versions after 26.0, the Remove Tool often triggers crash reports after being used a few times and operates very slowly.(Please don’t mention the Faster or More Stable options, as they are not fundamental solutions to the problem.)     This is how the Remove Tool performs in version 25.12.While 25.12 isn’t the most stable version, its speed isn’t too bad. (As I’ve mentioned in other threads, there’s also this bug: in versions 25.12/26.2, it seems that the first stroke is always processed by the CPU, which makes it slow, while the GPU seems to take over from the second stroke onward.)       And this is how the Remove Tool performs in version 26.2. You’ll definitely notice the difference in speed—it’s extremely slow. During the time you wait for it to process, the results are either the same as in 25.12, fail to remove the object properly, or trigger a crash report, making it a very unstab