Bug Reports

Photoshop 2023, the "export as" window has a "suffix" function. In the past it would add the suffix, and create a new file name with that suffix.  Now it asks if I want to save over the original file, as if it has the same name. The whole point of adding a suffix (for me) is to create different jpeg versions from one photoshop file, which now I can't do from this window.Why has this changed? It worked in previous versions...    

Hello! As the title stated: whenever I'm using File>Automate>PDF Presentation, every path in that PDF is deformed. I assume it is a bug, cos it's not an issue, when I'm saving single files as PDF (File>Save as>PDF). It's not a PDF preview issue either - that PDF presetation got pinted and the distortion is very visible on paper. I'm using the newest Photoshop (ver 23.3.1), Windows 10. In the example above both texts are text converted to shape. First one is from PDF saved as single PDF and second is from the same file, but saved as PDF presentation. When I leave text as text it's not deformed.

Zooming in and out in full screen mode gone a bit mad, see attached video, does the same thing with either ctrl - and + or the mouse scroll wheel, Photoshop version 23.5 on Windows 10

Hello everybody.   I was playing with some gradient outer glow and noticed that the "vivid light" seems to misbehave for some range of colors. The specific range depends on the colors of both the source layer and the layer below. But I'm not sure if that is intentional. I think it is a bug because this only happens when the fill opacity (for normal layers), or opacity (for layer effects) is set to 100%. If I change that value to 99% or less, then the blend mode seems to work as expected. If I'm not mistaken, the "vivid light" blend mode should use "color burn" to blend the color components if the source value is less than 1/2, or "color dodge" otherwise. So it seems as if the bad colors happen where the "color dodge" should be applied. At least when I change the opacity to 99% it seems that those areas look more like if the "color dodge" blend mode were applied. Also if one changes to "hard mix" which is like an extreme version of "vivid light" it can be seen that those regio

Hi there, this is my first message here. I've experienced an issue since many versions of Ps and I was hoping someone fix it but at the end I realized it's better to search where to tell someone to fix... and I finally came here. This bug is still there since Photoshop CS or so until today. I'm using Windows 10 x64 and now Ps 24.0.1 Steps to see it: Open an RGB image Go to the Information tool Place a color sample anywhere into the image with the color picker sample tool (shortcut I and then shift+clic) (sorry I'm using the spanish version of photoshop, so no sure the english name of it) Select Lab color in the drop-down list in the color dropper icon just beside the R,G and B values in the Info tool:   BTW: In this very same drop-down list I bet 0-32768 is a small mistake, it should be 0-32767.   Do a color conversion from the actual color space to another one in RGB. Go to History panel and go a step back. you'll see it automatically changes back to RGB instead of keepi

  Issue: As of Photoshop 23.5, the actions panel does not display recorded information properly. Instead '<unknown>' can be seen. This is present when utilizing the Geographic Imager plugin georeferencer tool, and the Adobe Photoshop SDK Import Gradient plugin. Photoshop version: 24.1.0 20221206.r.166 be4691b x64 OS and version: Windows 11 64-bit Steps to Reproduce: (Must have 'GradientImport' plugin installed) 1. Open Actions panel (Window > Actions) 2. Create new Action and begin recording 3. Click File>Import>GradientImport 4. Accept default settings and click Import 5. Click Done on the GradientImport dialog 5. Stop recording the action 6. Expand the Action 'Import' in the actions panel Expected result: Photoshop actions panel should display 'Using AdobeSDK GradientImport Multi-import: import info list import info Rows:256 pixels Columns: 256 pixels Mode: rgb colour' Actual result: Photoshop actions panel displays 'Using AdobeSDK GradientImport Multi-

Mac Studio M1 MAX, macOS 13, Photoshop 24.0 M1 Edition: By default, the Save Copy window is cluttered and cannot be saved. Intel Edition: Save copy window is normal, but the Save As window is messed up.   In the preferences, change to the traditional save as window and everything goes back to normal.

photoshop 2023 dopo l'aggiornamento non funziona, ho MacOS monterey, M1 pro. il programma va in crash all'apertura

Healing brush does not work on SolidColor layer mask after Revert command.   How to reproduce. Create a new document, create a SolidColor layer with a mask. Switch to the layer mask (alt+click). Draw something with a black pencil on the mask (like lines and dots). Select the healing brush and check that it works for the mask (remove some dots). Save the document. Do any action to appear in history. Execute the Revert command.   After this command, the healing brush on the mask of this layer will not work. If the file is saved and opened in a new way, then it is on this layer, on its mask, that the healing brush will not work.   Tested on photoshop CS6 and CC2020 (Windows)

Salve quando cerco di scaricare un modello gratuito da adobe stock mi dà questo errore... qualcuno sa come risolverlo? Ho provato a disconnettermi dall'account e riconnettermi, riavviare il mac ma non ha funzionato...  

  test pc is window10. Photoshop version 23.4 GPU comp off / on , Multithread of / off , Native canvas on /of I reset it, but the result is the same. It doesn't matter if it just looks like that and it doesn't affect the actual output. But that's how it's reflected in the actual output. So I can't proceed with the work right now. That bug occurs randomly when zooming in and out. Even if i use clone stamp, patch tools, or healing brushes, bugs occur randomly. Emergency patch is required.

Photoshop 2022  (photoshop version 23.5) on windows 10 21H2 with single monitor 1920 x 1200, going to Full Screen Mode and back to Standard Screen Mode causes the bottom of the photoshop interface to be off screen. Then one must go to the Restore/Maiximize button to fit the interface back on screen.   I have reset the preferences, but didn't make any difference.   As far as i can tell, this is only on the windows version of photoshop 23.5   Standard Screen Mode       After cycling through Full Screen Modes and back to Standard Screen Mode      

System details:   Surface Studio 2 i7 32 g of ram GTX 1070 Windows 11 22H2   Since updating to version 23.5, I've noticed a couple things. There seems to habe been some kind of change to how brush input is being rendered. On the plus side, it appears to have slightly reduced latency, but there is also some kind of bug causing a flickering to happen as the tiles are drawn in. Its really strange, the flickering while drawing is accompanied by it sometimes taking a step "back" in its history, only for that step to reappear as I continue to draw. I tried disabling multithread compositing to see if that was causing the issue, but it didn't make a change. Also, the same flickering behavior is there whether drawing with the pen or the mouse, so it seems to be about rendering rather than the input method.   Just to be sure, I reinstalled 23.42 and the issue was gone. Then, I reinstalled 23.5 and it was back.    Hoping this is solved in a patch soon, because I really li

Hallo Photoshop 2022 User   Bei der Verwendung von Myriad Variable Concept in Adobe Photoshop 2022 (Cloud) unter Windows 10 lassen sich keine Umlaute setzen. Photoshop springt bei Markierung des Ä, Ü, Ö und ß auf Myriad Pro um. Problem tritt nicht in Illustrator oder InDesign auf.

While you're at it, please consider fixing other long-standing issues with View>Flip Horizontal, like the way that brushes set to Pen Tilt don't function correctly when the view is flipped (they can't tell that the view is flipped and when used are angled as if the view isn't flipped, despite the fact that the brush cursor visually tilts correctly.)

Easy one to explain- take a look at the text outside of my artboards. It looks like a wet paracetamol dissolving on the background.

When I invoke the edit guides dialog box, it shows the position of the selected guides in pixels even if I have guide, grid, rulers units set to inches in Preferences. How can I get the dialog box to default to the units I have specified in Preferences? Photoshop 23.4.2 Mac OS Monterey 12.6 (Apple Silicon)

image/adjustments/match color in 16 it is broken in recent versions of Photoshop (Mac OS). It works in 2022 versions. It turns the layer completely black or white

I've tried looking online for solutions but nothing has helped. After clicking on "Filter Gallery" the error states,    "The end of data was reached while reading from a container."   I just finished restarting my computer, reinstalling photoshop, and even updated my iMac. The error appears in every file I open   Here are my specs,   iMac (Retina 5K, 27-inch, 2019) 3 GHz 6-Core Intel Core i5 8 GB 2667 MHz DDR4 Radeon Pro 570X 4 GB

Photoshop CC 2015 on MacBook Pro I'm having a few shapes on stage. Shapes are duplicates of Rounded Rectangle with the same size and properties. 1. I add Drop Shadow effect to one of the shapes. 2. I make Copy Layer Style action over it. 3. I Paste Layer Style to the rest of the shapes. The result: drop shadow effect is pasted to all layer, but with wrong parameters (shadow is with larger distance and blur: https://www.dropbox.com/s/gdw5a3mei73...) I tried it multiple times over various layers, both single layer and multiple layers, shapes, text, bitmaps — the result is the same, effects are copies and pasted with wrong parameters.

Hi, I am experincing quite a few crashes with PS 24.0.1 on my M1 Imac. It crashes at random times sometomes when editing and sometimes when i am about to save an image or just quit the App. I have just received a crash report when i had saved an image. All system software etc is up to date and i have tried all of the info supplied by Adobe eg. reset preferences etc but still get the crashes. I have checked the GPU compatability and its says all is compatible. Before i try to instal another version i thought i would ask the question here as im not sure if it's hardware or software related.  I do have Topaz Labs plug ins installed but have had the crashes without using them. Eg when just saving an image or exiting PS Each time i have had a crash it has been submitted to Adobe & Apple via the dialogue boxes which appear after the craash. My Imac is on OS Ventura 13.0.1  16GB RAM   Any help or advice would be welcome

I'm annoyed that Photoshop keeps closing when I am working. Is there a way to get this fix?

There was a similar discussion about a Macbook M1 Air, with a workaround / solution. The solution involved using "Presets" in "System Prefs > Displays". I don't see a way to make that applicable to the Mac M1 Mini. I have confirmed that the M1 Mini will display a 30 bit (10-bit per channel) image in many applications. Indeed, it will display a 10 bit grayscale gradient in 30 bit mode correctly in Photoshop 2020. However, nothing I have thought of and/or tried has been able to make the 30 bit option available in Photoshop 2021 or 2022.

Hi, since the last update 4 days ago. When clicking Photoshop->Setting the menu is blank. I need to change my settings. Anyone else have the same problem? I have done all the usual rebooting, checking for updates ect. MacOS, MacBook Pro, 16GB memory ect...   Many thanks in advance.    

I open HEIC file from iPhone 13 Pro, the image was taken in portrait mode. Photoshop v23.2.2 under Windows 10 does NOT display the depth map that is embedded in the file under channels. This apparently works in Photoshop on macos. the file I am using is OK because I can access the depth map under 'masking' in Lightroom using the same file.  Can anyone help with this issue? (I can recover the depth map using 3rd party software)   Another issue, but related, I cannot open the HEIC file from Bridge into camera raw as the option for HEIC does not appear under Camera Raw file handling settings.