Bug Reports

Hello Adobe team,I am reporting an issue with Photoshop 27.7 on Windows 11 where the new Remove Tool on-device generative AI model cannot be enabled on an NVIDIA GeForce RTX 5080.The “Device” option remains greyed out, even though all documented requirements appear to be met.SYSTEM SUMMARYPhotoshop version: Adobe Photoshop 2026 / 27.7Operating system: Windows 11GPU: NVIDIA GeForce RTX 5080VRAM: approximately 16 GBDirectX: DirectX 12 / DirectX 12.2 availableNVIDIA driver: current and newer than Adobe’s stated minimum requirementPhotoshop GPU acceleration: enabledPhotoshop GPU status: GPU is detected and allowedAvailable disk space: sufficientThe GPU is usable for normal Photoshop GPU acceleration.The important detail is that Photoshop appears to detect and use the RTX 5080 for general GPU acceleration, but in the system information / GPU identification path the card is shown as:NVIDIA GeForce RTX 5080 UNKNOWNThis strongly suggests that the issue is not general GPU acceleration, but the

Al momento de abrir la aplicación en Photoshop en la parte de Destacados existe un error ortográfico, debería decir lo mejor  

Right after the june 18 2026 Photoshop update , the colours of every .PSD that I open are WASHED OUT!!!  If, in Photoshop-preferences I disengage the “Use Graphics Processor” colours look allright again….. My set up is an iMac Pro ( 2017 ), connected to an Eizo-monitor.

When I open Photoshop (Version 27.7) , the Adjustments panel disappears from my workspace’s docked panels. Also, when I try to open the panel from Window > Adjustments, nothing happens. The panel does not open, and no check mark appears next to Adjustments in the Window menu to indicate that it is active. The Adjustments panel reappears when I reset the Essentials Workspace, but the Adjustment Panel disappears again after I close and reopen Photoshop. Currently, the only way to restore the Adjustments panel is to reset the Essentials Workspace each and every time I launch Photoshop. This is not a great workaround because it requires re-customization of my workspace every time I open Photoshop. Could someone please help me resolve this issue? 

PS 27.7.0 MacIn PS, canvas size always defaults to pixels even when user settings are set to inches. I’ve reported this in earlier versions and thought it was fixed, and at one point it was verified by Adobe staff and experts here as a valid bug. It looks like it was never fixed. This is super annoying if you’re a professional user that adjusts canvas size many times a day. I would love to see this fixed. It is a super pain all day long. 

The Generative expand function in my desktop Photoshop software doesn't work. My latest attempt at using it simple involved trying to generate new image either side of an existing horse image. I was following a tutorial provided in Photoshop called ‘Expand images with Generative AI’ (see attached image). When I try to use the Gen expand function, it seems to start processing but then an error message appears (attached). It used to work fine but it has not worked for over 6 months. This is the first time I have reported it. I believe it started malfunctioning after a routine Photoshop update.I am part of a business subscription plan so I believe I have the most up to date version of the software (version 27.7.0). I am using a MS Windows operating system Dell machine. Full details can be sent on request.

Photoshop 27.7.0 releasemacOS 15.7.7 Wacom Intuos Pro PTH-660Wacom Driver Version 6.4.13-4 Smudge Tool has a problem when using the Wacom pen and a soft brush with dynamics.select the Smudge tool Select a default brush with softness and shape dynamics settings (size, transfer, etc.). Hold the cursor still or move it very slowly; the Smudge brush position jitters constantly by a few pixels, making precise control impossible.Hard 0 % softness brush and a brush without any size or transfer dynamics, or using a mouse, works as expected. I have attached a video clip of the problem. Please see the link below:https://www.adobe.com/files/libraries/urn:aaid:sc:EU:60f57959-98f9-4985-ab48-b9d5812bf98f

Adobe Photoshop Version: 27.6.0 20260422.r.11 4804c18  x64 (final, Release)System: Mac OS 15.7.3In this version the scrolling speed in the layer panel has drastically increased so its not usable anymore to scroll with the mouse scrollwheel.With a standard generic mouse using scroll wheel and moving it one step scrolls more or less 10 layers.With such a big steps in scrolling using the scrollwheel becomes not possible. User is resorted to use the side scrollbar which results in a drastically more time spent doing this function that is done 1k times each day.I have checked and nothing else on my system has increased speed so its local to Photoshop.Can some validate if they have the same issue as me? 

Dear Adobe Team, I am extremely frustrated with a critical change in Photoshop 2025 that severely impacts my workflow. In previous versions, when I set the interpolation method to “Nearest Neighbor”, Photoshop would retain this setting even after restarting. However, in the 2025 update, the software no longer remembers my chosen interpolation method, forcing me to manually reset it every single time I use the Transform (Edit → Transform) function. I am a fashion print graphic designer working for several well-known luxury fashion brands, and I rely on Photoshop for high-precision work on a daily basis. This unnecessary change is highly disruptive and drastically slows down my workflow. As a professional, I cannot afford to waste time adjusting the same setting repeatedly throughout the day. There is absolutely no reason why Photoshop should reset this option upon every restart. I demand that Adobe restores the ability to permanently save the chosen interpolation method for transformati

Photoshop 26.9 (just updated), macOS Sequoia 15.5, Intel MacBook Pro.   1. Drag with text tool to create large text box 2. Type a few characters, so most of the text box is empty 3. Select Type->Convert to Dynamic Text 4. Try to click and move the bottom transform handles   Expected: able to click and drag to resize bounding box Actual: cannot grab handle and text box is deselected   5. Change to Move Tool 6. Double-click text box to select and switch to Text Tool 7. Try to click and drag transform handles.   Expected: able to click and drag to resize bounding box Actual: cannot grab handle, text box is deselected, tool reverts to Move Tool

Using Image calculations in Photoshop 27.4.0 does not allow me to select second open identical image except for the colour space as a source, one is set to RGB the other (a copy) is set to CMYK in version 27.3.1 this works I've reset my preferences , restarted photoshop and disabled graphics card option still does not work… 

The recent 27.5 release got updated Canvas Size modal, and it has several bugs that affect my workflow, which requires gradual pixel-perfect changes of canvas size in various directions (my units are pixels most of the time).I use relative changes to canvas size, so ‘Relative to current dimension’ checkbox is ON for me most of the time, and in this case the bugs I get are:Canvas Size modal opens with default values of width and height set to 1 pixel. Should be 0. The width and height inputs do not accept 0 value — it gets reset to 1, meaning if I want to change canvas size in one direction, anyways I’ll get 1 pixel added to the other. It’s not possible to set negative values now, which used to work before, and at times it’s more convenient and precise way to ‘crop’ canvas, rather than using the Crop tool. The values step now is 0,01 pixel, which is meaningless in most scenarios. It used to be 1 pixel, and it should be, as it allowed to use keyboard up and down arrows for quick pixel pe

Summary: When using PS 27.7.0 the sky replacement feature is unusable as the sky will not be loaded and visible as a preview in your file while you make settings adjustments for it.   (temp fix utilized: downgrading to 27.5.0 regains sky feature usage confirmed)Description:  In 27.7.0 the sky won’t preview in file to see how settings adjust new sky fit.  If you just randomly choose settings and hit done/ok, it will then load the sky into your file.  But I was not able to see what settings were resulting in sky fit to image until after it’s loaded.  Then all you are left with is adjusting the two mask layers that are not as helpful as the sky replacement settings initially are.A coworker still only had 27.5.0 installed and their sky replacement preview still worked.  So I downgraded to 27.5.0 and now mine works again from that version.  I did not attempt 27.6.0 version.  Before downgrading PS version, I attempted to rule out graphic driver by updating Nvidia graphic drivers but did not

Since updating to 27.5 yesterday I’m encountering a bug where when I switch between channels of a Curves adjustment layer the active point is deselected. This breaks flow and slows down the process of getting the color right, which for me typically involves bouncing back and forth between 2 or all 3 color channels (working in RGB) and making one or two point adjustments with the arrow keys.  To reproduce:Make a new Curves layer Add a point somewhere in the middle of each of the R, G, and B channels.  Press Opt + 3, 4, or 5 to switch between the channels.  Prior behavior: you would still have selected and active the same, nth point on the curve. So, if you were on the Red channel and had tweaked a point in the middle, then switched to Blue which you hadn’t touched yet, you’d have the 255,255 point active since it was the second point on the curve. Once all three channels had a point though, switching between them would keep the midpoint selected for tweaking with the arrow keys. Current

Issue summary: Since Photoshop 2025 (exact version unknown, but after 25.12.4) direction-based brush strokes, when set in the brush settings (Shape Dynamics - Angle Jitter - Direction), are not working properly. The very first 'pixel' of nearly every stroke is angled about 90 degrees perpendicular, before correcting itself immediately as the stroke continues. This breaks a previously working workflow. The problem is only mitigated by using external stabilisation (I’m using Lazy Nezumi Pro with light smoothing), which suggests the issue is related to how initial pen input samples are handled at stroke start. I also ideally need to have 1% smoothing enabled in Photoshop, or the bug can lightly reoccur occasionally. Using older Photoshop versions avoids the issue, but this is not a viable long-term solution due to other compatibility and stability concerns. I have used these brushes for years with no issues until recently.Product and version: 25.12.4. (laptop) the bug does not occur in th

The current version of Photoshop continues to have issues. Especially in versions after 26.0, the Remove Tool often triggers crash reports after being used a few times and operates very slowly.(Please don’t mention the Faster or More Stable options, as they are not fundamental solutions to the problem.)     This is how the Remove Tool performs in version 25.12.While 25.12 isn’t the most stable version, its speed isn’t too bad. (As I’ve mentioned in other threads, there’s also this bug: in versions 25.12/26.2, it seems that the first stroke is always processed by the CPU, which makes it slow, while the GPU seems to take over from the second stroke onward.)       And this is how the Remove Tool performs in version 26.2. You’ll definitely notice the difference in speed—it’s extremely slow. During the time you wait for it to process, the results are either the same as in 25.12, fail to remove the object properly, or trigger a crash report, making it a very unstab

See attached video. My computer info:Processor: AMD Ryzen 9 9950x3dRam 128 gbGraphics: Geforce rtx 4090Windows 10 Pro Version 22h2, os build 19045.6466

 selection and deletion of objects are done on the device or in the cloud, but the device has not been working for six months, so I use the cloud version. However, now the cloud version starts the search slider, and after a couple of seconds, it displays that no objects have been found 

The tab to click on and change the properties for an adjustment layer randomly disappears. Quitting and re-opening the app solves the issue, but it will happen again within minutes, usually when switching between different projects or different app on the computer.  On Photoshop v26.6 - Mac Mini M4 pro, 32gb ram, 1tb ssd.   Any help would be appreciated! ss

Photoshop 27.7, Modern UImacOS Tahoe 26.5.1 After you dismiss Finder’s Save panel (where you can edit the filename and location), the Save for Web dialog won’t respond to ESC or Enter key. Steps to reproduce:Open an image and ⌥⇪⌘+S to open Save for Web Press or click Enter Without actually saving the file, just press ESC or click Cancel to close the Finder SavePanel Hit Enter again. The OS-level dialog should popup again, but it won’t. Hit ESC to close Save for Web, also no response.Workaround: Press Tab once or twice to active and move the keyboard hotzone away from the image preview area. This looks like a minor issue but it’s a pain in the ***.

After the latest update, Photoshop (27.1 /win 11) started showing a very unpleasant bug.As soon as I open a PSD file, without doing anything (just by selecting a few layers), the fill content of several "fill layers" changes automatically.This happens with simple "Shape layers", rectangles.See my history state without doing anything elese but selecting a few layers in the freshly opened PSD: _v__design_0-1765202885307.png   For example, a layer that originally had a black fill suddenly has a gradient applied. In another layer with a gradient, the orientation gets flipped by 180 degrees.It may seem random, but I suspect the "shape layer fill" is automatically set according to the first selected layer in a row! In any case, it completely ruins the opened document. I can re‑set the layers, but the same thing happens again the next time I open it.   It’s extremely frustrating — basically, it makes the program unusable! I might try downgrading to a lower version to see if tha

The bounding box of the transform tool is in the wrong location and not properly scaled when used on warped text. It does snap back to correct scale and location when a corner of it is selected but reverts once the transform is deselected again.Photoshop version is 27.5Off center and wrong scale bounding box on warped text 

I would like to change the canvas size via action in Photoshop 27.4. I’ve tried to record changing canvas size but I doesn’t work correctly. The dimensions wasn’t saved. Steps to reproduce Open a document. Create a new action in the “Action” panel. The recording starts automatically Go to Image → Canvas Size… Let the units as it is. Switch the size mode from to Relative. Enter values for Width and Height Click OK to apply. Stop recording the action. In the action the appropriate parameter for Width and Height are empty. The same steps in Photoshop 27.2 working correctly. The same issue was reported for the Photoshop Beta here. P: Canvas Size relative Width/Height not recorded in Actions (values saved as blank) | Adobe DME A temporarly workaround is to deactivate “Enable Modern User Interface” option. After a restart of Photoshop it worked. 

Using the latest Photoshop 27.7 with Modern User Interface enabled, in the file dialog launched from Save for Web you cannot copy/paste text into the file name. Also when you hit the escape key to cancel the file dialog and return to Save for Web screen, hitting escape a second time does not close out of Save for Web but command-period still does. If you avoid trying to copy/paste text the escape key still works correctly. Disabling Modern User Interface returns all the expected behavior. This is on a fresh machine set up a couple weeks ago.Photoshop 27.7macOS 15.7.5