Camera Raw

I'm following the new method for setting defaults, checking "Use defaults specific to camera model" in Preferences->Raw Defaults. This worked fine for an ARW file from a Sony camera. It does not for HEIC images from an Iphone X. When the HEIC image is open, Camera Raw's dialog says "No raw images open". Is it now impossible to set default behavior for converting iPhone HEIC images? It used to work.

ciao non riesco a  trovare il modo di cambiare il metodo colore in camera raw vorrei portarlo da metodo lab a rgb ma non riseco a trovare i comando per cambiarlo grazie molte 

I just purchased a Nikon D780, and can't open my raw files in Lightroom 5. I have macOS 10,15.3,I tryed downloading camera raw plug-in installer but had no luck.. can someone give me help to what to dothanks

Since with CR 12.2 my previous Adobe Default settings are now reset and gone, I had to follow the new (complicated) procedure to recreate my Adobe default, now based on a preset. OK, I was able to "fix" it, or so I thought. Part of my camera-specific Adobe Default has always included automatic upright correction.HOWEVER, now the upright correction is totally messed up. After testing it several times it seems that it won't apply a custom correction evaluating and correcting each actual open image(s) but seemingly tries to apply the same correction values that the original image, the one that was used to create the default preset, needed. So basically it messes up every image that does not happen to need the same correction as the one specific image that I used when I created the preset that now serves as my Adobe Default when opening any images.Not sure if I explained it well, but this totally messes up my workflow.In the past the correction was mostly very accurate doesn't matter what

For the most part ACR automatically identifies and applies lens profiles for my Hasselblad lenses. However the XCD 45P photos get a warning that says "unable to locate a matching lens profile." The XCD 45P is a newer lens but when I do it manually I can indeed see the matching lens profile and apply it manually. But something is preventing ACR from seeing and applying the profile auotmatically.

I'm not able to add a new brush in Camera Raw in Photoshop 2020 on a Mac Pro (garbage can) running Catalina 10.15.2. I click the NEW brush option, it shows the NEW button active, but when I go to paint, it reverts back to the 1st brush and continues adding to that instead. Every time I click the new I reverts back as soon as I paint. I have save the edits I made, close Photoshop, and then re-open it to be able to start a new brush. Needless to say, this is annoying. Creative Cloud reports software up to date. Any help with this is appreciated, thanksHardware3.7 GHz Quad Xeon E512 GB 1866 DDR3AMD FirePro D300 2 GB

ACR 12.2 on the MAC OS x 15.3 When I mouse over all the tools in ACR it sometimes shows descriptions of the tools in black lettering and sometimes in white lettering. The Black lettering shows up when I double click (in Bridge 10.3.138) to open a file. The white lettering shows up (in Bridge 10.3.138) when I use key commands to open a file. Very weird. How do I get the program to be consistent?

Ever since the new Photoshop came out, at times, the Camera Raw straightening functions seem to go "wonky" for a lack of a better term..... I have a 11-24 Canon lense that is ultra-wide for shooting interiors, when I am finished, I always use the Camera Raw filters to straighten my images.  It is just acting strange.  Doesn't perform as well as it has in the past.  Any suggestions?   

I have been using Photoshop and Camera Raw for a month or so now. However Camera Raw seems to have picked up an issue. Evderytime a raw image is opened for edits, the image does not show up properly in the viewing area. The image is completely messed up. Need help!

I have recently started to use Adobe RAW and find that the labels along the top of the frame are yellow in colour and not visable. I use an Apple 27" with Catalina and Photoshop CC 2020. Can anyone suggest a fix? Thanks

I just upgraded to PS 2020 and Camera Raw was automatically upgraded. Now there is no way to make the settings sticky. I have to reload my preset for EVERY photo.

Recently bought Canon M6 MkII. My old version of Photoshop will not read the .CR3 files. Downloaded latest version of PNG converter. When I select folder with Raw files in it no files appear and there is message "no items match your search" Thought maybe file format was to new so tried pointing to folder that I had older .CR2 files in but, got same message. Why is the converter not recognizing my files are there some settings that need to be changed somewhere?  One more thing, I tried to uninstall the program and then reinstall but, when I try to uninstall the program does not show in list of programs that can be removed. 

When I pull it up , all the text and information is missing. When I go to RAW preferences, that dialogue box shows the same. I'm using Photoshop 21.1 with updated Bridge/RAW as well. I'm also using Mac with Catalina 10.15.3. I checked the box in preferences to use the graphics card - didn't help.  

I just updated all of my Adode apps and can no longer open CR2 images directly from the server. This was a problem when I first updated from 2019 to 2020. It took a few months before this issue was fixed and everything was was finally working fairly well until I just updated again... why is the problem back again? I don't understand why Adobe crashes their fixes. It doubles my work and I'm sure I'm not the only one with this problem. If anyone has any suggestions I would appreciate the help... I don't want to wait another 2 months for the fix. 

Today (Mar 2) I updated PSE 15 and Camera Raw.  I still cannot open RW2 files from a Panasonic Lumix DC-ZS80.  That camera is on the list of supported cameras and indicates that only 11.2.1 is needed. 

Hallo ihr lieben, ich habe folgendes Problem,  Wenn ich in Photoshop etwas bearbeite dann ist alles flüssig, aber aber in camera Raw stockt alles woran kann das liegen bzw was kann ich tun? PCAMD Ryzen 7 2700X Right-Core Processor 3.70 Ghz16 GB RAMGeforce GTX 1050 ti  

Hi all. I have a library of images that were originally 16 bit scans from B&W negatives done on a Nikon Coolscan 4000. I adjusted all the images, and thought for archive puposes that I would save images as tif files. As time went on, DNG sounded like a better way to archive, so I converted all those tif files to DNG. The problem I am encountering it seems that the only two programs that "read" the initial adjustments, crop, etc. is PS and Bridge. If I view in a program like Apple's Photo app, the images show up, but they are in their uncorrected/cropped state and look awful. Apples own Preview app doesn't open DNG. So my question is what app other than PS or Bridge support opening these types of files with their corrections. I'm thinkin' when I'm dead or something, who will be able to access the corrected images, and what if they don't have/use PS or Bridge???? BTW- this only happens with the iamges that were scans from B&W negatives >Tif>DNG. The raw

Good afternoon! I can not open photos from a mirrorless camera with the extension cr3, what should I do? Tell me?

Adobe's latest version of Camera Raw (12.2.0.386) .. It's absolutely insane to have to return to Bridge and open the Camera Raw Settings to set up the Defaults.. We used to be able to do that right in CR.  What happened to "Save as new Camera Raw Defaults" ?  Please put the option back !!!

I've just bought the Sony A7R IV and uncompressed raw files are huge (approx 120mb) and converting them to DNG using adobe's DNG converter decreases the file size to around 60mb, which is interestingly similar to Sony's compressed raw file size. Now my brain tells me that if you convert a 120mb file to a 60mb file some data is lost somewhere, or does DNG act as some kind of lossless compression?  So the question is, am I losing any image quality, colour or anything else by converting to DNG?

This what i get when merging 3 vertical images in Lightroom  shot with D850 and a Schneider TS 28mm lens. It  used to work fine, but now no longer. It works fine in Photoshop. My other 2 Nikon TS lens 24mm and 19mm work fine on both platforms. Am baffled. Help please.

HiI have having problem with converting CR3 files and hope someone could help.I use Photoshop Elements 12, Lightroom 6 and Photoshop CS5.1I also just downloaded from Adobe website the latest ACR and DNG 11.0 software.But they still don't work on CR3 files.I assume it's not backward compatible to older photoshop software???I also tried to use the DNG 11.0 to open CR3 files, but it doesn't recognise the format.  Does anyone know the reason?Does anyone know the latest Photoshop Element 2019 will work with CR3 files?Thanks for any info.

Camera Raw in Photoshop all have been updated on my end and still getting this bug. when opening a few items and then adjusting the values you get (a value between -100 and +100 is required. previous value inserted. ) which when entering a value +10 or anything you get a pop up which you would then click ok and then the pop up comes up again and again and again. sometimes it stops and other times you have to force quit the program . ANY sollutions to this ????? 

How to tell which version of camera raw I have? The only Google search I found answering this question refers to is 2 years old and seems to no longer apply. There is no File, Edit etc. menu on the new version of Camera Raw with (Photoshop/Bridge CS6). I do use Adobe Application Manager to do my updates telling me if a new version exists or not, nevertheless I would like to know.

After installing ACR 12.2, when searching images in Bridge, I thought something had happened to my monitors; the images looked like crap. Then I realized the "update" deleted my default settings. There is no longer the option to Save Default Settings. How do I get them back? Thanks,Tom