Camera Raw

good afternoon When I open the camera raw in the rough, it jams and does not allow to use Photoshop. Does anyone know what is going on?

Having trouble with Camera Raw 9.12.0.784  using Windows 7 - 64Just today I am trying to edit and tweak 1800 Canon .cr2 files and when I select more than one file in ACR and choose "Sync Settings" as I always do, ACR doesn't change the settings of the other files selected. This also happens if I save an adjustment preset then choose more than one file to Apply preset to. IF I choose one file at a time it will usually change that file using Apply preset, but no matter how many files chosen Sync settings will not work.This happens when going to ACR through Bridge as well as through Photoshop.I have uninstalled and then re-installed Photoshop and Bridge through CC. Once reinstalled, I was able to sync 8 files but then immediately sync quite working again.

I am really having a hard time trying to understand ACR the DNG Converter and LR. I'm also undecided on two camera models, the Canon 6Ti and the Canon 7Ti.I have some questions below in hope that someone can help me decide on things or point me in the right direction.1) Is there a major improvement in PS-ACR 9.1.1 compared to PS-ACR 6.7.1?(I would think only someone who has used both versions can answer this.) 2) Is there any reason to have LR 6.14 if you have Photoshop CS5 or Photoshop CS6?(From what I have read, LR and PS-ACM are the same thing and only makes sense to have one or the other.)3) Do some people still convert there original raw files to DNG even if their versions of PS-ACM or LR are compatible with the original raw files? (I thought the DNG Converter was only for people who's cameras are not supported in their versions of PS-ACM or LR.)4) For people that do choose to convert their original raw files to DNG, is it most common to then delete the original raw files once con

I just purchased PhotoshopCC 2018 with ACR version 2017 10.10.864. On the Basic Menu under Lens Correction Tab/MANUAL; I was expecting to find the UPRIGHT buttons followed by 6 transformation sliders. My version of ACR does not have this. Am I out of date or did Adobe get rid of this menu?  Appreciate any help on this matter. Thanks

This is not just an annoyance - it is a show stopper. When trying to use "Merge to HDR Pro" from Lightroom, it aborts in Photoshop with "Camera Raw Filter is not available" after "Open anyway" was chosen in Lightroom. The same happens when "Camera Raw Filter" is chosen from the filter menu in Photoshop. Photoshop shows Camera Raw is 9.10.0.739 so that's the latest but there's obviously a bug where this is not being recognised as the latest. How do I revert to the previous version of Lightroom and Camera Raw because the use of the Camera Raw filter is part of my normal workflow many times a day.Note: This conversation was created from a reply on: Lightroom Edit in Photoshop warning message since update.

Hallo,wann immer ich RAW-Dateien als psd speichere und einige Bearbeitungsschritte durchführe ergeben sich riesige Dateien von bis zu 200MB, auch nachdem ichüberflüssige Ebenen gelöscht und auf eine einzelne Ebene reduziert habe. Nun frage ich mich schon seit längerem, ob es eine Möglichkeit gibt die Dateigröße eines psd bestehend aus einer einzigen Ebene weiter zu minimieren ohne dabei an Bildqualität zu verlieren.Die Dateien in einen komprimierten Dateityp zu exportieren steht dabei nicht zur Debatte, da dabei für mich wichtige Metadaten verloren gehen.Viele Grüße und danke im Voraus,Tim

Hi Sir,I downloaded ADOBE air, and did not find 'Adobe lens profile downloader 1 0 1'.I was told to download AIR first, then download ALPD 'Adobe lens profile downloader 1 0 1'I saw next screen with ADOBE AIR pop up every time when I click 'download Adobe lens profile downloader 1 0 1', so I can not find ALPD to download.If you know anybody knows the answer, please forward this message to them.Please email to my address also 'echang8888@yahoo.com' if you have the answer.Thanks for your help.Elliot

I bought a new laptop.  Macbook Pro (mid 2015).  It's running OS X El Capitan, v. 10.11.6.I installed Adobe PhotoShop CS5 on it, the same version I had on my old macbook pro.  However, PS on my new laptop is not reading the raw CR2 files from my 5DMarkiii.  I tried running the updates in photoshop, and it is failing.    Photoshop Camera Raw 6.7 Update  There was an error downloading this update. Please quit and try again later.Please help.  The only reason I bought a new laptop was to edit my photos on.  Thank you,- seema

Hi all, I have a Nikon D5100. Recently, since I got a new computer, I no longer have the Nikon raw converter/editor software installed. I decided to try my luck with just uploading my photos to apple's iPhoto program & editing them in Photoshops RAW editor. The photos upload fine to iPhoto, but I have not been able to get them to open in Photoshop RAW no matter what I try. I first tried dragging a photo (which says in iPhoto that it is still the raw NEF file,) directly onto the photoshop logo in my dock, but that had no response at all. I then tried opening the photo directly from Photoshop with File>Open. This opened the image in Photoshop but automatically converted the image to a JPEG for some odd reason. Finally, I tried dragging the photo from iPhoto to the desktop to see if it was a problem with iPhoto specifically, but the computer automatically converted the photo to JPEG once on the desktop. Anyone know what I can do to get it to open as its actual file is, a NEF raw fo

Hallo,habe mir eine Fuji X-T2 geleistet, aber mein camera raw öffnet die RAF-Dateien nicht. Alle update-Versuche misslangen.Meine PS-Version ist CS5 12.1.64Als Version des Raw-Converster bekomme ich trotz update auf 9-er und 10-er Version angezeigt: 6.7.0. 339Habt Ihr bitte einen link für mch um die Fuji-RAF-Dateien mit PS5 bearbeitbar zu machen?Danke und Gruß AndreasHi,i have an Fuji X-T2, but camera raw diesn`t open the RAF-files. I was looking for an update, although 9.th and 10th-Versions were updatet, Photoshop doensn`t open the Fuji-files.My PS-Version is CS5 12.1.64My version ot the Raw-Converster is still 6.7.0. 339is there any possibility to work with Fuji X-T2-RAF-files with PS5?thanksAndreas

How can I stop notification's? I do not want light room or  camera parts of my PS program!!!!!!!! They are extremely annoying popups! Email address removed by moderator

Just moved to a new system, reloaded CS 5 12.1 x32 extended with Camera Raw 6.7.0.339. I tried opening NEF images that were shot with  NIKON D750. Can someone help tell me what I need to do?

I've downloaded the replacement for CS3 and at no time did it ask me to enter my new ser#.  And when I tried to launch this new Photoshop ONCE AGAIN it wanted me to "reactivate" which it wouldn't let me do.  So what do I do now???????

I cannot make lens corrections in ACR 10.1.  This screenshot sums it up.  I do not have all of the tabs.I just installed LR and PS, too.

Hello,I have been using Bridge and Adobe Camera Raw to edit my photos for awhile now, and all of the sudden I am having a problem I have never had before. I finish editing my photos in Raw and save them to a folder on my computer. When I open them on my computer, they look fine, the edit is showing up and not the original. However, when I upload the photos to my website or to google drive, or even open them on another computer, they are showing up unedited (the original photo) rather than the edit I saved. I have been using this program and never had this problem. I did the same thing I have done every single time, and for some reason this is happening. Any suggestions?

nell' apertura della foto con Photoshop cc 2018 il camera raw non funziona la foto non si apre e la finestra rimane vuotanon si chiude di nessuna icona. ho provato a scaricare la versione 10.0 ma comunque non funziona

Hi, I don't know what I did , I was working with the "radial filter" and the cursor froze as the magnifying glass, different shortcut also stop working like the "y" checking before/after.Can anyone help me?

Photoshop CS6 will not read RAW files from my Olympus OM-D E-M1. Going through the Help files to find an appropriate file to download for CS6, the right hand side of my screen is always  covered by a text box obscuring the information I needed. Please can someone tell me where to find the file I need.ThanksRobert.

Two things I want to get out of the way first:YES I am only selecting a folder and not trying to open it.NO I did not use ViewNX.I wanted to edit NEF files, from my Nikon D5600, using Lightroom Classic CC, so when I tried importing the NEF files, I would get an error that read "Some import operations were not performed." When I googled the problem I read about converting the NEF Files into DNG files. So then I tried using the "Copy as DNG" tool in Lightroom while importing, and received the same error as before. Upon further googling and reading, I read about Adobe DNG Converter v8.8 and downloaded it from Adobe's website. But whenever tried to covert the files, I received an error that reads "The source folder does not contain any supported raw files."The following is a list of the different methods that I tried usingCopying the photos from the SD card, using a card reader, and then trying open the copies in Lightroom.Using the NEF copies on my PC, trying to using the "Copy as DNG" to

After update the workspace is not properly distributed which leads to less space to work with pictureSee example:https://shared-assets.adobe.com/link/cf46a217-c842-422c-4d77-cd8fb57c78e0Thank you for any assistance!Steps done:- Reset preferences PS LR and ACR- Disabled GPU PS and LRIssue on Mac High sierra as well as Windows 10. !

Although the help is still there, when hovering over the OPEN button with the mouse, the button does not switch to OPEN OBJECT when pressing the SHIFT key.MAC OSx High Sierra - MACBook Pro 2017Regards,Michael

So, i have been using this version of bridge/photoshop and the converter without issue.  Indeed i used it yesterday.  However i updated windows 10 today and now when i try to ope a raw file it comes up as lots of horizontal lines.  I also tried on older files which i have used succesfully before.  Help??

Hi. You can only use CC, if your MAc meets the requirements.In my case, it doesn't. I have Photoshop Cs5, a Canon 5d mark 3 and a 10.7. Mac-now the new RAW DNG converter won't work on the old mac and the old converters links don't work either.Any ideas?

I recently purchased the Tokina 11-20 for Nikon mount.  When using it with Adobe Camera Raw I cannot get the lens correction profile to auto load.  The error message is "Unable to locate a matching lens profile automatically".  However, as soon as I select Tokina as the lens make CR auto-recognizes the lens as the 11-20. This is with CC 2017 and CR 9.10.0.739.  I also installed the latest version of CR 10.xx.xx.xx.xx and the behavior is unchanged.  A user on Fred Miranda reported that he sees the exact same behavior with Lightroom.  Any suggestions?

Hello everyone.Is there any chance of seeing relative adjustments in ACR? There is a basic implementation of it in Lightroom CC, and would be a very welcome addition to ACR. Let me explain.For example, I have two RAW images shot with Auto exposure. I adjusted the exposure of the images in ACR to match each other (say, +0.5 and +1), but now I'd like to make both images a bit brighter by the same amount (+0.2). The only way I can do this now is adjust each image separately to maintain their current previously adjusted exposure values. It would be great if I could select two images and add a relative +0.2 amount.The same refers to most other adjustments.Thanks for any reply in advance!