Camera Raw

Hello. I use Dell XPS i7, RAM 32, SSD, and for several recent years my GPU was Nvidia GTX 1650. Which was fine but the Denoise AI implemented recently in ACR worked very slow, 20 Mp RAW files during ~2 min and 45 Mp files during 7-8 min. I purchased RTX 4060. It was recognized well by PS and ACR, and the denoise AI initially works quite fast, processing 20 Mp files during ~8 s, and 45 Mp files during 20-30 s. But this lasts for 2-3 images only, after that the speed drops to the previous 7-8 min. Neither PS nor ACR report any errors and show full recognition and support of the GPU. Restart of PS usually help for another couple of images but sometimes it starts slow from the very beginning. Where may be a problem? I do not process many RAW files together, only one-by-one, usually with several masks. I already returned the first purchased GPU and replaced it with another one, from a different manufacturer, but the results are the same.

I have been testing the Lens Blur -Bokeh feature which I access in Camera Raw Reader. Can be very helpful to enhance images that have too deep DoF, etc. (esp APS-C, and IPhone images).But I see some bad masking errors, that often introduce an unnatural pattern around the penumbra. It would be helpful to add tools to expand or constrict the blur mask. Or perhaps correct with an add/subtract brush tool.When using a telephoto lens, there should normally be a creamy soft bokeh around the subjuct (if the background has sufficient distance) When adding bokeh in post, this typically requires careful masking. It would be helpful to see enhanced mask correction tools in a future iteration.I typically use the Field Blur feature in post as it is not a permanent (destructive) alteration. But the Camera Raw option is usfeul, and would be excllent with masking improvment.Some enhancements would also benefit the main masking feature in RAW reader. Its fairly robust as is. But the add/subtract could b

Since updating the jxl files i've made re no longer readable by any program and appear to be several mb larger. I've tried downgrading photoshop and bridge but the issue persists so assume it is from camera rawAnother computer with camera raw 16.3 is ok, but I can't find how to rever to 16.3 from 16.4, only to much earlier versions that do not support jxl as an export format.

Hello! I have had a problem with Camera raw for about 2 weeks. How I work with masks and remove noise. I get a message that there is low memory, etc. 😞 Strange, because the computer is new. Less than a year old. I have never had any problems. Intel 13700kf processor, gigabyte nvidia rtx4070 card, 32 GB RAM. Windows 11 home computer. All programs updated, new driver in card and nothing helps 😞 Today I tried to repair programs with the Creative Cloud uninstaller. It didn't help either. I have no idea. I'm not an IT specialist. Can I uninstall all the programs and Creative Cloud and reinstall them on the same computer? Once I download Creative Cloud, I will log in and I will download my plan? Is there an email address for contact with Adobe in case of technical problems? I apologize in advance for any errors. I am writing via Google Translator. Thank you in advance for any help and tips

hello adobe community,my Camera Raw works very slowly and has delayed responses.It takes 2-4 seconds to display the next photo. Working with Camera raw is unbearable. I have the latest version but I can't work comfortably. I am very disappointed with Adobe because it is not possible to work comfortably with it.I have windows 11, my computer has very good parameters, but even so, adobe packages such as Bridge and Camera Raw are disastrously slow and lagging. What should I do to make Bridge and Camera Raw work perfectly? PC build:Operating system: Win 11 proProcessor: Intel i9-10920X 3,5GHzGraphics card: Invidia 3070 8gbRAM: 128 GBMemory: M2 disk

I mistakenly recorded some photos with the camera set for 16:9 instead of 3:2.  I know that the file itself is 3:2 since Apple Preview shows this and the "Get Info" command indicates that the ARW RAW file is 7952 x 5304 pixels.  Photoshop RAW displays the image as 16:9 with the top and bottom cropped.  I can't find a command that will allow RAW to show the whole image.  Is there such a command or a workaround?  

Hi,    I'm developing a software which can convert raw files to dng format with dng_sdk not use DNG_Convert,but i can't find interface documents about dng_sdk or tutorials about dng_sdk. Has anyone used dng_sdk to convert raw to dng? 

Camera Raw Camera Profiles are missing in version 16.4. (Mac OS Sonoma 14.5) This is an old problem that has recurred in the latest update. The old solution of removing then replacing items from the /~User/Library/Application Support/Adobe/CameraRaw folder does not work.

Buenos dias. Supongo que no seré el único que se ha encontrado con este problema.Ni Lightroom ni CameraRaw de Adobe, pueden leer los archivos ORF (RAW) generados al tomar fotos en alta resolución con una cámara OM-1 Mark II de OM Systems.He comunicado este problema también a OM System para ver si se puede encontrar una solución lo antes posible.Con cordialidad.Josep Torres

I updated to photoshop 25.9.1 on my macbook Pro M1 and I don't have generative ai with the remove tool.Anyone got an idea why?  Thanks

Today I updated to Camera Raw to 16.3 on my Windows 11 PC.I noticed that, when using the masking panel, a checkbox for "Show Overlay" appears in the incorrect location and is obscuring sliders. This makes moving sliders difficult if not impossible - see screenshot.Am I alone in observing this or are others experiencing the same?

Anyone else having troubles when editing in camera raw after applying a smart filter? I have the latest version: V25. I use MacOS Sonoma on iMac 2022 M3 chip.  Whenever I apply a smart filter and then open camera raw the loading bar remains static and I have to force quite Photoshop. 

Hi all. I develop and process all my raw files in ART (Another RawTherapee), then export the files to tiff format in order to finalize the picture (healing brush tool - remove, heal, clone one).When I open such tiff files in acr, the first thing I see is that the profile there is not color, as for a raster image, but adobe color, which does not suit me.I can change the profile from adobe color to color, but if I'm processing about 300 images and I'm completely immersed in work, then I might forget to switch the profile.The problem is that if I load several images into Adobe Camera Raw, change the profile for the first image to color, copy the settings to the clipboard (ctrl+c), and then paste them for other images, selecting them, then nothing will change for such other images. Pasting settings will only work for one image, unless several are selected.As a workaround, is it better to use an editor not from Adobe (for example, in dxo photolab I don’t have this problem at all), or am I m

Hi! I have a problem with camera raw in elements 2024. My laptop is to old so my GPU is not supported (Intel HD grapics 4400). So I need to downgrade to a version who supports my GPU. I use Swedish win 10 for information, Downloaded ver 14.5 and run exe file, but it does not replace ver 16.  By some pages at Adobe this should work but it does not. How to fix this issue ?Best regards Olof.

Bonjour, Cherchant les profils de camera pour mon appareil Canon, j'ai installé Camera Raw sur mon Mac mais le fichier "cameraprofiles" censé contenir ces fameux profils est désespérement vide. Il s'agit pourtant de la dernière version.  Est-ce normal ?

Hallo zusammen,ich finde kein CR-Profil für das LAOWA 100mm f/2,8 2:1 Ultra Macro APO Canon RF. Gibt es keines oder wo gibt es Infos wann es eines geben wird ?VGHans

My experience with Adobe Support - Not good, issue since 9/18/23 FYIAn FYI post.On or about September 18, 2023, I contacted Adobe customer support regarding an issue I have been having with ACR. But before I made this 1st contact, I researched all over the internet for a similar problem hopeful for a fix. I found nothing so I proceeded to open my case with Adobe. Issue: I like to use local adjustment brushes; I do lots of round tripping between Lightroom Classic and Photoshop. It helps my workflow to be able to jump into ACR as a smart object while I am in there. I had purchased quite a few adjustment brush packs from well-respected photography asset sites. They were all for Lightroom Classic and ACR. I installed in Lightroom Classic, no problem, all my adjustment brushes where there in the masking module. I have well over 100 I think about 124 or more. I followed the instructions that came with the brushes and installed them in ACR. I go to use an adjustment brush that I just ins

Looking for "Adobe DNG" cameras supported list. I found a camera list for Camera Raw plug-ins:https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html But I need to use the stand alone DNG converter as I read at the Adobe site:"Adobe provides backwards compatibility for the latest cameras for use in older versions of Photoshop Elements through the DNG Converter" Perhaps the numbering system is one in the same?

Is there any way to move exposure, shadows, highlughts etc slider in ACR with mouse scroll wheel without moving the mouse? Say i click inside the box with value for exposure, i'd like to be able to increment and decrement value with mouse scroll wheel without actually moving mouse.

After hours of working in Camara Raw 14.0 for Photoshop 2022, retouching a photo (and frequent saves in between to xmp), I opened the final result as an object in Photoshop. To my surprise ALL the work I did in masks was gone once the image was opened in Photoshop. Spot removal and all adjustments I did on the Edit-tab had been saved, but I lost 5 hours of mask retouching work. Re-opening the object in Camera Raw did not bring back the masks, nor did reloading the xmp. I tried re-opening the original CR3 in Camara Raw, with the same result. The masks were simply not saved to the xmp-file. I've just updated to Photoshop 2022, so I'm new to the masks feature, but I've been working for years with Photoshop Camera Raw and the adjustment brush and such. I've never had this problem, nor did I do anything out of the ordinary before opening the photo as an object. Is this a know bug? Has anyone else experienced this? I work on a Macbook Pro 2019 with Monterey 12.0.1 freshly inst

Does Camera Raw use Dark Channel Prior based image dehazing? Trying to better understand what is happening in the "black box" when making adjustments to images. 

Canon released the RF35 1.4 VCM lens this month (June). When can we expect Adobe to update its lens profiles for this lens?

Model Name: MacBook Pro  Model Identifier: Mac14,9  Model Number: Z17G001STB/A  Chip: Apple M2 Pro  Total Number of Cores: 10 (6 performance and 4 efficiency)  Memory: 32 GB  System Firmware Version: 8419.80.7  OS Loader Version: 8419.80.7  Hardware UUID: EAC16A4C-CF95-51C9-8110-CC4881DC45EE  Provisioning UDID: 00006020-000250EE1AC3C01E  Activation Lock Status: DisabledSystem Software Overview:  System Version: macOS 13.2.1 (22D68)  Kernel Version: Darwin 22.3.0  Boot Volume: Macintosh HD  Boot Mode: NormalPhotoshop: 24.4.0Wacom pro Driver PTH-860Hi all,I'm having issues with pausing and or lag when using Photohop's Camera Raw filter when GPU acceleration is switched on.  If we turn GPU off it works fine but gives me an alert saying it needs to be on.  If I use the mouse it works fine.  It seems to be an issue with GPU acceleration and the Wacom Driver.Has anyone else seen this?  I've tried all th

Hello Everyone. I wonder how you can Minimize the Camera Raw Page. I know by clicking on the "F" Key it goes to full screen and a smaller screen. Is there a way to Minimize the actual Camera Raw?Thanks. 

Hello ADOBE, there is a big error in the new Bridge version... if I want to make an HDR from, for example, 3 photos, I get an HDR file that is empty and also low in MB, so that is not correct, I can also do it Can't open or edit the file anymore?