Dimension

I'm trying to apply a decal as an overlay which has cutouts and holes in. The problem is the decal always distorts... Every single overlay I need to replicate has cutouts in so currently with this bug I am simply not able to use the software. The problem has been happening since Dimension was released (2 years ago), so i always find myself removing the software since it isnt fit for purpose then trying months later to see if it has been fixed... Which is never is.

私はBigSlur 11.1 (the latest version) 2019 MacBook Pro 16inchi retina. Dimension 3.4 をインストールしようとすると、次のmsgが出ます:  Exit Code: 113-------------------------------------- Summary -------------------------------------- - 2 fatal error(s), 0 error(s), 0 warnings(s)  FATAL: Fatal Error '113' occurred while downloadFATAL: Error occurred in install product workflow with error code 113 error message {https://cdn-ffc.oobesaas.adobe.com/core/v3/applications?name=ESHR&version=3.2.1&platform=osx10-64&build=3.2.1.1583,P:-210,PS:-9810,G:-40}---------------------------------------------------------and:他のバーショーンをインストールして見ましたが、同じ結果でした。Wi-Fi connectionは非常に強いので、それはこの原因ではないと思います。解決の方法は何でしょうか？サビナ

Hola! escribí esto en dos idiomas para ver si alguien puede ayudarme por favor.Hello! I wrote this in two languages to see if someone can help me please.  ESPAÑOLTengo problemas con este programa, es la primera vez en mi vida que lo descargué y cuando lo abro, aparece esto pero no puedo darle click cualquier cosa, parece como si fuera una imagen o algi así. Tambien ven la parte superior donde el puntero está en la pestaña de "adobe dimension" al lado de la manzana, solo me aparece la opcion de "Quit". La version del programa es 3.4, ya lo cerre y volví a abrir muchas veces, e incluso lo desinstalé y volví a instalar, sigo teniendo el mismo problema.Alguno le ha pasado o solo soy yo? ENGLISH I have problems with this program, it is the first time in my life that I downloaded it and when I open it, this appears but I cannot click anything, it seems as if it were an image or something like that. They also see the upper part where the pointer is on the "adobe dimension"

Voilà deux jours que je tente de démarer Dimension ... le programme plante au chargement... obligé de forcer à quitter car il ne réagit pas ... j'ai testé des version plus ancienne mais rien y fait ... ca ne va jamais plus loin que la fenêtre de chargement et il semble toujours freezer au lieu de charger. Aucun message d'erreur ne s'affiche. macOS High Sierra version 10.13.62.93 GHz Intel Core i78 Go 1333 MHz DDR3ATI Radeon HD 5750 1024 MoSSD avec 170Go libre ????? je ne comprend pas ????? QUI PEU M'AIDER ???? Qui a eu le même problème et trouvé la solution ... SVP...

how to make a hollowed sphere and add a hole on it in dimension ? Thanks!

Hi, I created a simple 3D model of a drawer using Blender, and exported it as an .obj. As you can see from my screenshots, the model displays fine in both Blender and Photoshop, but carries strange additional planes when imported into Dimension. Any idea why this would be, and how I can fix it? I created this drawer by applying a difference between two rectangular shapes (using Boolean modifier), and then a difference between the resulting shape and a cylinder. Would there be a better way to create this shape in Blender for use in Dimension? Thank you!  

Hello,I would like to propose new features to Dimension and not depend on third party programs:· Be able to create empty objects and group them to create complex shapes.· Improve the function of stickers, since in complex objects with curves and shapes the function is damaged.a greeting

Hello, very new to dimension here. I notice on the grid you can access and move objects by coordinates. However, the grid isn't the traditional cartesian system, the Z axis is where the Y axis should be. Is there a way to change the layout? I haven't been able to find an answer. John

I am in the middle of my first 3D rendering project for a fancy house under construction, using Adobe Dimension and "inches" as my unit of measurement for the app's ruler. (I have switched between my windows laptop and my partners macbook air using the cloud file storage.) It is not until now that I am coming full circle around the perimeter of the building, knitting it all together, when I've realized that the dimensions taken directly and specifically from the blueprint do not add up within the Dimension UI, leaving gaps at the back of the house between where the last 2 walls should meet, among other proportion issues now rearing their heads such as posts a set distance away from the patio doors not adding up. Even summing up the total length of the wall faces on 2 different directional sides of the building (there are various points where rooms poke out and/or recess from the next/last room behind them) and creating an object of that length doesnt line up with the edges of the build

Hello! I can clearly see how to contribute images and videos etc. to Adobe stock, and I can also see that there are stock 3D models available on Adobe stock for purchase to use in Adobe Dimension, but I can't see a way to upload my models for sale in this way. I am a 3D artist and currently use Sketchfab and Unity Asset Store, and would be keen to add this platform to the list. Many thanks,Jakub

First time error/bug reporter here so please understand my lack of software lingo. When using Adobe Dimension I am running into two seperate bugs/errors. The first being black, pixelated areas appear in the design window area please see attached photo (randomly placed everytime application is started). Second issue being an error message (photo included) mentioning that dimension needs to restart due to an error. This message only displays when I attempt to render models with substance materials applied. Maybe I am using the substance materials incorrectly, I assumed they could be applied to models just like any other material in dimension. Also I aquired these substance materials from adobe stock. Also I attached my Dimensions log per the error message, I am assuming this is needed for diagnogstic purposes.

Curious if anyone has been able to solve (or if a plug-in is available) to control the camera zoom when publishing a 3D object after generating the link. The camera currently is zooming inside of the object.  We'd like to have the interactivity of using the mouse to orbit around the model, however limiting the dolly zoom. Has anyone had a similar issue and have been able to figure this out?

I just installed the latest version of Dimension (Adobe Dimension Version 3.4.0, Build 3.4-20200908.r.2791-611127e) on my Mac Mini 2018.This mac runs Catalina 10.15.7 on an integrated iGPU - Intel 630 1.5G and an external eGPU - AMD Radeon Pro 580. Both features OpenGL 4.1 engine, according to GLView. However Dimension don't beleive the same, and refuse to launch "Does not meet minimum OpenGL version"I disabled SideCar as instructed in the forums, no luck.I see in the logs, just that my AMD eGPU is not detected... copied below. Any advise?   gbl Dbg 0ms>Start GPU Sniffer Run gbl Dbg 0ms>Build Commit Hash = 611127eacd250f22943d21b3c2c9dbaa3a0ef9a2 gbl Dbg 0ms>Build Compile Date = 2020-09-08 13:58:49.667230 gbl Info 0ms>Tester="AdobeDimension" gbl Info 0ms>snifferStart="2020-12-15_12:03:39" gbl Info 0ms>AIFCoreInitialized=1 gbl Info 0ms>AIFOGLInitialized=1

I have a tub object I have been using for a while and usually use it with a capsule object and I can place the capsules inside the tub with no issues. I recently downloaded a gel capsule object from Adobe and placed it in my scene. For some reason when I place the gel capsule inside the tub it disappears. I have no idea why this could be happening? I have tried a couple of things but nothing has worked, so any help would be greatly appreciated. https://we.tl/t-KoDLaukFOr  

When I render my object from Dimension to a PSD, I'm getting a strange result. The preview of the PSD looks fine, but when you open it, only half of the glass is transparent When I export the PNG, it's fine, but I need it to be transparent.Any help appreciatedThanks

Hi,  Just re installed Dimension after a Covid break.  It will not load I get to the info page below, and that is it?  Any help out there please?

Does anyone know when this will be available? I'm sort of upset that I cannot use Dimension right now on my new Mac with the M1 chip. Or is it available and I'm just missing something??

Hi All,I have created a large city scale model in Infraworks that is 200kmsq and have used Dimension to publish section of a masterplan online to share with clients.  Due to the scale of the model, i have to export from Infraworks as mulitple OBJ's and struggle to position these back together in Dimension.  Does anyone have any tips to get around this? or how to import a model in the right geo-spatial location?  Any help would be greatly appericated, and happy to share a publish verison of a section of the model for other that want to look at using dimension with Infraworks.  

Are there plans to expand Export formats supported by Dimension? Right now, the ability to import FBX files integrates nicely with our higher-end 3D platforms; it would be great to support formats that better allow round-trip integration with platforms such as Cinema 4D, Maya, and Unreal. 

new laptop with specs as below.Dimensions (3.4) firstly wouldnt open due to the openGL error which i fixed with a GL extensions viewer download. However, now theres no error popping up but Dimensions still will not open or even show in my task manager. The weird bit is when I try and unistall to reinstall it pops up with the error message "conflict uninstalling dimension - save your work and close following program before continuing".I havnt had any previous versions installed or used on this PC.  All other adobe apps are working as per usual.  Any help would be greatly appriecated!!!   

is there a possible way to resize multiple decals at once?i have here 3 decals with diferent materials.

Hi! I am having some issues with rendering on Dimension CC. Lots of the time rendering works, however when the scene becomes larger, with more objects, renders seem to get to 50% and then stop. Looking at task manager, it seems that after 50% of the render has completed, CPU usage alsways drops and RAM usage increases at this point, and I presume the PNG is saving. When the render works the RAM usage remains around 60% and render finishes all the way to 100%. However, when the render fails at 50% the RAM usage just drops here to around 30% and never finishes. Initally, I thought it was due to decals not being high enough resolution, but even when these are around 4000px X 4000px the render still fails on certain files. The canvas size I use is 3600px X 2400px, which i guess is moderatley large, but like I said most of my renders will finish at this size, so I dont see that this is the issue. I dont think it is my hardware, I have a AMD Ryzen 5 3600 CPU and a GeForce

Can anyone tell me what causes the "graininess" in this render? The attached image was made using the High Quality PNG setting, but I got similar results with an earlier PSD render. I've made similar scenes before, but this issue hasn't arisen.

1280x720 Stops at 47% every time.1920x1080 Stops at 48% every time. 3840 x 2160 Stops at 50% every time.The renders never finish. When I use low setting it finishes. But It won't finish on Medium or High settings. I have RX550 4 GB, 16GB of 3200MHz,  AMD Ryzen 2600 Six-core and running on Windows 10. Any tips?

I can't start working in the program because I don't see any processes in design development. I can add any elements, but I can't see them. Please, help! The first launch!