FrameMaker

I am unable to create a document is more than 99 pages and I am unable to edit variables. I was previously using a Trial version of FrameMaker, but received my Enterprise account today. I have played around with numbering in different chapters and each time numbering ends after page 99. I had similar issues in the Trial version, but now I am running a licensed  version. It could be a verification issues as they used a generic account instead of my personal account.

Is there a way to share a custom FrameMaker workspace with another computer? Is the workspace saved as a file somewhere that could be given to another user?

My team wants to use SharePoint for version control and when I try to add a project to version control and select the RoboHelp SharePoint Connector (per the instructions), I get the following:But this is supposed to have been installed already. ???

Engineering Standards department of our company wants to use Adobe Frame Maker 2015 with SharePoint. Can anyone please provide me a step by step guide or a reference link where I can study about how to integrate SharePoint 2010 with Adobe FrameMaker 2015 and other prerequisites?Any help around this would be very helpful. Our company is already long time customer of other products of Adobe.

Hi, colleaguesWith this post I’m trying to raise the question of using XML (DITA) within Adobe Technical Communication Suite 2015.I have experience with developing “unstructured” documents in FrameMaker, but I have never tried XML based (DITA) functional capabilities. Therefore, I’m a novice in this.Pre-requisites:- Adobe Technical Communication Suite 2015- Bunch of FrameMaker 12 unstructured sources (books, chapters, and illustrations)Tasks and Workflow:I need to provide Subject Matter Experts (SMEs) with an easy access to documents I create, edit, and manage in FM. SMEs, I assume, should be able to check documents’ (files’) content, and suggest the content’s changes. Next, I should be able to review the changes, apply/or reject them (in FrameMaker), and finally generate a PDF file and/or HTML5 Help output (using RoboHelp). I consider using XML format, because, in this case, SMEs do not need to have FrameMaker installed on their computers, thus they may use any XML (WYSIWYG) editor. (

Hi,I use FM12. I want to preserve empty lines ( and more linebreaks [shift + return] between code text ).If FM12 import my XML file, additional line breaks will be deleted. In the Read/Write rules I've placed a statement element "Code" {      reader line break is forced return }didn't work for me. In the FM Help Files I've found the following hint : "place a attribute xml:space="preserve" at the element ..."My Question: Where should I place this attribute? 1.) in the DTD file? 2.) in the EDD file?3.) in the Read/Write Rules? 4.) in an additional configuration file? Thanks for any help!M.

Hi,When saving as MIF on Windows, network UNC paths to images are saved with the code <h\>, like this:<ImportObFileDI `<h\>my.network.se<c\>Customers<c\>temp<c\>Logo.eps'><ImportObFile `//my.network.se/Customers/Temp/Logo.eps'>The MIF reference refers to the device-independent path code <h\> as "Host (Apollo only)". (What does Apollo only mean – this is on Windows, and the code is written by FrameMaker2015, using Save As)The ImportObFileDI line seems to be required in order to get network UNC paths to work from MIF. If I exclude ImportObFileDI line, and only keep the ImportObFile line...   <ImportObFile `//my.network.se/Customers/Temp/Logo.eps'>... then the file is not found when opening the MIF file in FrameMaker. FrameMaker says Missing file Looking for: \my.network.se\Customers\Temp\Logo.eps That is with a single backslash in the beginning of the path. Why is it not two backslashes? I have two (front)slash in the MIF code –

I need the SVG to output with the Pantone color infromation retained. Images are 2 color, black and a pantone. Everytime I export or print to pdf the files are rasterized and converted. Pdf options are extremely limited from what I can see with Framemaker, but is there a different means of output that would solve my issue? Thanks.

When my laptop is docked, I work on two monitors, and when it is undocked I work on the laptop monitor alone.Here is my situation:Setup: FrameMaker 12 running in Windows 10.I need to bring up the Customize Text Frame... pop-up window to reformat the text frame in a master page. I control-click on the frame, then go to Format -> Customize Layout -> Cusomize Text Frame ...The mouse turns white and I don't see the pop-up window. The main framemaker window becomes unresponsive, indicating that another window is active and has the focus now, but I don't see this window, even if I resize the main window of framemaker, so I'm thinking that the Customize Text Frame window wants to be displayed on a non-existent monitor; a common occurrence after a crash.Is there a way to reset the location of these windows in FrameMaker? Is there an .ini file I could edit for this purpose?I hope this all make sense!Thanks for any suggestions you guys might have.

table formatting (custom ruling and shading is ineffective with table conntinuation variable?)

In FM 2015,When I create a new paragraph format, FrameMaker starts giving error messages "Couldn't find tag: paragraph-format" whenever I select in a paragraph with that format. This does not happen in FM 12.To Repro:1) File > New > Document > Portrait.2) Enter a few lines of text pressing Enter (new paragraph) at the end of each line.3) Select any paragraph, Bring up Paragraph Designer.4) Click in "Commands:" menu; Select "New Format..."5) Enter the name "test". (All check boxes are selected.) Press Enter.Whenever you click in the paragraph you get the error message. The message also pops up if you click the new format in the Paragraph Format Catalog. The new format is clearly in the catalog and Paragraph Designer works correctly. That is, it shows the new format name and you can change formatting and apply.Does anybody know what is going on? Maybe I'm not understanding something.Note: File > Save As to MIF and re-opening that MIF file seems to fix it.Edit: A work around:

Anyone know if this combo works, yet? Cannot find any requirements info on the FrameMaker website. But also like to hear real life experiences with Win 10.Thanks!Randall L-M

Hey gang,In FM11, is there a way to turn off automatic parentheses when editing equations?  I know that FM automatically checks the equations and breaks them into chunks it can understand; I just don't want that to happen until I tell it to.  Adding parentheses when I didn't tell it to does nothing but break my workflow, because now I have to go back and remove all of the parentheses from a statement and then put the ones I want back in their respective place(s).  My most common thought when working with FM equations is, "Did I tell you to put that there?  Then WHY DID YOU PUT IT THERE??"Any help is sincerely appreciated.-terry-

HiCan you please me know if there is  any FDK functions available to automate the publish functionality in framemaker.ThanksSharada

I've just upgraded a number of documents from FM8 to FM10.My body paragraph style has the following paginationsettings:Start: AnywhereKeep with Next and Previous: Not selectedWidow/Orphan Lines: 2In FM8, these settings work as expected - there are a minimum of two lines of text if a paragraph breaks across a page boundary. A three-line paragaph is never broken. This behavior is the same in FM9.In FM10, I get single-line widows - a single line appearing at the top of a page. I have experimented and do not get single-line orphans - a single line at the bottom of a page.This behavior is not what I want - it changes my pagination and looks ugly.If I start a new paragraph after the widowed line, a second line pops up from the body paragraph on the previous page, which is the appearance I want. However, if I save and re-open the document, the second line has gone back to the previous page.I've tried using a clean template file, in case there was some invisible garbage in my document, but tha

Hi,I'm using Structured FrameMaker 12 (XML). I have customized my quick_element.xml toolbar file to create icons that insert custom elements into my documents. This works great. I really need to extend this toolbar so that the icons insert an element with a specified attribute setting. This would save massive amounts of clicks (I know this is possible for keyboard shortcuts via extendscript). The documentation is sparse and the available syntax is not documented for the <ELEMENT> tag in tag-description.xml.This is the functionality I currently have:<STRUCTURED_APPLICATION  app_name="Topic">   <ELEMENT elemTag="Font">  <images base="fontIcon"/>   </ELEMENT></STRUCTURED_APPLICATION>This is the functionality that I want:<STRUCTURED_APPLICATION  app_name="Topic">   <ELEMENT elemTag="Font" attrName="outputclass" attrVal="emphasis">  <images base="fontIcon"/>   </ELEMENT>&l

Need help in upgrading frame maker 10 SKU license from version 10 to 11 , If not 11 can we upgrade it to 15 and then downgrade it to 11 ? If possible how can we get in touch Adobe sales team. This is a commerical requirement and its been difficult me to get this answer

Hi guys, I'm stumped by the following situation:The header of my documents contain the variable: Running H/F 1 which uses <$paratext[01 - Chap Title]> to insert the chapter name.My issue: The first letter of the chapter title is in a different font than the rest of the title as in the image below:The header shows as follows: As you can see from the second image, the "B" of "Broken" shows in a different font than the rest of the text, namely it is still set in the character tag that I used to display it differently in the title.I would like this "B" to be displayed in the standard header font. I tried to insert the variable <Header> in front of <$paratext[01 - Chap Title]>, but Frame Maker ignored it. Any suggestion would be greatly appreciated.Thanks,

Hi all, I'm in the last stages of submitting my FrameMaker reference book to the printer, and just ran into a "stopper"Anyone who can solve this will get a free EPUB of the book (already produced, details at http://www.techcommtools.com/framemaker-reference-book/)A funny (actually, not funny at all) thing started happening yesterday...When opening any existing projects, I'm unable to use the Save As function.New files seem unaffected, but existing documents are treated differently.The issue popped up after a Open All Files in Book crashed my computer.Has anyone else seen this, or know how to fix it? Please help so I can get this thing out to Amazon!!-Matt

Just started using Framemaker again for a new contract and client has Framemaker 2012. Is version 2015 backwards compatible to this version?

I have several tables (1 column and 1 row) with the "Title" value "Below table" in the table designer. I import images to these tables (import file > import by reference) and resize them using anchored frames. When I publish files as responsive HTML5, the space between the image in the table and the table title is different every time. 5 tables, 5 different spaces. If the title is "above the table", everything is OK. I think this is an FM bug. Has anyone have such an issue?

I have a customer who need to clean up a big bunch of old documents. The trouble is, they have been made with heaps of conditional text and a stylesheet which has gone haywire.What is the best procedure to clean out all conditional text? I have tried doing a search and replace, where I searched for condtional text and replaced it with text, but that deleted big chunks of the document. Is it possible to somehow remove on text condtions and "flatten" the document?Best regardsBjørn

Is it possible to turn this off and go back to the old file-at-a-time decision making?

I have a table with two columns.In column 2 I have a bulleted list.At the end of a bullet in the list I place an anchored frame that is positioned 'Below Current Line'.I want the anchored frame to extend to the left so that it lays 'over' columns 1 and 2 (I will have a text frame within the anchored frame, and a table inside that text frame, but to simplify this question, the contents of the anchored frame are irrelevant).If I align Left, the anchored frame 'snaps' to the separator between columns 1 and 2, which is no good because I need to extend over into column 1. (Note: the separator is visible.)If I align Right, the frame 'snaps' to the right edge of column 2, and the edge no longer appears (hidden by the frame). I can't figure out any way to make it not obscured (have played with all the anchored frame/object settings, but can't find a solution.)Now.... if I align Center, the anchored frame is centered in column 2. If I then stretch the frame all the way to the left edge of colum

We have updated our FM11 templates to include a new font. Is there a way to import the new font from the template to an existing doc to change the paragraph tags to the new font? Using Import > Formats > Paragraph Formats from the template to a chapter file in the existing doc does not seem to work.