Lightroom Classic

Adobe Lightroom Classic 14.0.1Window 11 Home 23H2 fully patched When printing a 16 x 9 ratio horizontal image in landscape orientation on a 19 x 13 in sheet, I set all margins for 0.25 in, the page grid for one row and one column, the cell size width to 16.125 in (which is rounded to 16.13 in the application) and leave the cell size height to the maximum. The resulting printed image is 16.1875 in or 1/16 in larger than the set size. When I set as above with a cell size width of 16 in, the resulting printed image is 16.09375 in or 3/32 in larger than the set size. However, when printing a square image in portrait orientation, set the cell size width to 12.125 in and leave the cell height to the maximum, the resulting printed image is as it should be, 12.125 in square. Interestingly, if I open the 16 x 9 ratio horizontal image in Photoshop 26.0.0 and change the image size width to 16.125 in, the resulting printed image is exactly the same as above at 16.1875 in. While

HI Everybody, I don't know what happened, this is the first time I've encountered this. After importing photos to Lightroom, the image changes as in the attached screenshot. In the Windows browser, the photo looks fine. Some kind of error saving on the camera?A few of the photos in this series are ok. But when you check the rest, this is what it looks like.Best regardsRadekI use Sony a6300

I'm considering purchasing this computer and wondering how it will perform with Lightroom and Photoshop.  

After updating to LRC 13, all my HEIC files turned out totally green. even importing into PS they remain green.   Till using MacIOS Sonoma 14.3, the trick was to reimport as .jpg, but after updating to 14.4 this trick doesn't work any longer.   anyone else with this issue ?    [moved from bugs to discussions according to the community rules - Mod.]

Hi, I need help please.I'm using Lightroom Classic 12.5 with Camera RAW 15.5, on Windows 11.My GPU is ASRock Phantom Gaming Radeon RX 6950 XT.My CPU is AMD Ryzen 9 5950x and I have 80 GB of RAM installed.All my drivers are up to date, including Windows update.My camera is Sony A7R V, and I'm editing RAW (.ARW) files weighing about 120 MB each.I'm experiencing repeated freezing while editing photos. Lightroom becomes unresponsive for 5-20 seconds every few minutes. Between freezing, it works just fine.  It does not crash. On Edit > Preferences > Performance, 'Full graphic acceleration' is enabled.Under 'System info' it shows Lighroom is using DirectX (and not OpenGL). If I disable 'Use GPU for image processing', and use my CPU for processing, I don't encounter freezing. I have read that forcing Lightroom to use GPU with OpenGL instead of DirectX can possibly resolve this issue, but I couldn't find any way to change that setting under Windows (only Mac, using a

Select some photos in the grid and open the Edit Capture Time window. Set Type of Adjustment to Shift by set number of hours (time zone adjust) in the Edit Capture Time window.Now, I want to shift my photo's with 4h30, (Europe vs Sri Lanka), but it is not selectable. I'm only allowed to change from -24 to +24 in discrete steps of one hour.Can the resolution of the interval be changed to one minute using 2 combo boxes?

If I select all images in the Library module in LRC and select "Convert photos to DNG" only one photo is converted and the rest are not. I also have the same thing if, for example, I mark several images in the Library module and enter a title in the metadata, it is only applied to one image. How can I apply the changes directly to all images? Thank you and greetings

Migrate Lightroom from Windows to MAC .I use an external HD NTFS to copy all my pictures.I installed new Lightroom on my new MAC.Open Lightroom on the new MAC and can see ? on all files .So execute the Found missing folder and open the HD but receive this error.Any Tips ? Best Regards/// Urmas Broberg   

My Lightroom cannot turn on the GPU full graphics acceleration function. Currently, only basic graphics acceleration can be used, and "Use GPU to process images" cannot be checked. How can I turn it on? Attach system information:Lightroom Classic version: 11.2 [ 202201281441-a5b5f472 ]Licensing: Creative CloudLanguage setting: zh_twOperating System: Windows 10 - Business EditionVersion: 10.0.19044Application Architecture: x64System Architecture: x64Number of logical processors: 16Processor Speed: 3.5GHzSqLite version: 3.36.0Built-in memory: 65479.8 MBPhysical memory available for Lightroom: 65479.8 MBPhysical memory used by Lightroom: 2828.8 MB (4.3%)Virtual memory used by Lightroom: 3648.6 MBGDI Object Count: 854USER Object Count: 1988Program Process Count: 3668Memory Cache Size: 147.2MBInternal Camera Raw version: 14.2 [ 1028 ]Maximum number of threads used by Camera Raw: 5Camera Raw SIMD optimization: SSE2,AVX,AVX2Camera Raw virtual memory: 1291MB / 32739MB (3%)Camera Raw Physi

Hi Adobe Community,I’m encountering an issue in Lightroom when working with my customers’ favorites. Here’s the problem: When I filter the favorites using text input to locate the images, the pictures appear correctly. However, when I try to rate these images—whether by adding stars or flags—the application shows an infinite loading bar that never ends. This makes it impossible to process hundreds of images efficiently.Has anyone else experienced this issue? Is there a workaround or solution to fix it? Thanks in advance for your help!my system:Apple M1 Max32GB RAMmacOS 14.7

HIi have just updated to Lightroom classic V14, my catalogue is still v13.3. I did upgrade the catalouge after the update. is this the correct version?

I use the stacking function of Lightroom Classic (version 13.4 on MacOS Sonoma 14.5) to collect different views and versions of the same art object. Collect objects of the same place in folders and subfolders by type. I may have older photographs stacked with newer ones, one of the newer one on top of the stack, but references in my notes may still refer to the older photograph. Now if I search the photo number of the older photograph within a certain place with all photos in subfolders shown. The photo numbers within stacks are only found if I first make sure that all stacks are expanded. This is valid if I search from "all photographs" (the entire catlaogue) or any of the subfolders with all photographs within that shown (the full number apparent in the folder section). Since classic shows the full number of photographs contained in the catalogue or the respective folder (including its subfolders) in the folder section, but then does not consider all those in stacks when I do a text

I keep getting this error. "There was an error copying files to the detination you selected. The following files could not be copied"My workflow is to go out and shoot multiple jobs. I then import all the files into lightroom, create subfolder for each shoot and then selelct and drag and drop the images to each subfolder for each job. Thing is, every damn time it leaves behind images and says "could not copy " filesname(s) images". It's so random, if I try and move 200 images, it will pop up and say it can't copy 10 of them, next time it can't copy one of them, but it happens EVERY time. So the only way to do it is to repeat the whole action again. This happened on my old PC, so I bought a brand new one and the same thing is happening. It is just so frustrating. I've had a look through the discussions and no real definitive answer. Starting to think the only way to do it is close lightroom after importing and do everything in file explorer and then reopen and synchonise

Problem: Standard Previews are build using the iGPU of the CPU and not the NVIDIA GPU. This is probably a lot slower! It really impossible loooong time for 1000 images. Like 15minutes or so... Lightroom Classic version: 14.0.1 [ 202410161356-30922cfc ]Operating system: Windows 11 - Business Edition How to produce:Import ImagesLibrary - > Previews -> Build Standard Sizes PreviewsCheck Task Manager, dGPU is not used at all. In case you are wondering: Yes all acceleration is active.    Edit: It seems its 100% CPU even and not any GPU. The screenshot provided was also during video playback Here is an updated screenhot while building when I paused video playback:iGPU:  CPU:     

Context: Windows 11, Lightroom Classic 14.0.1 Camera : Canon R5 (CR3 files) Lightroom is configured to create XMP filesCatalog and originals on an external SSD SSD is healthy according to Windows and CrystalDiskInfo   I imported 33 CR3s, worked a few minutes on one of them and tried exporting it to JPEG.  My export parameters are pretty simple : folder and subfolder selection, default JPEG parameters, remove some metadata, show in explorer. Note that this was also the only photo I worked on today. Result : The progress bar appears and instantly fills to 100%, never disappears, and the JPEG is never created.   I tried exporting other photos in the same series, one by one (otherwise the whole export process hangs as soon as it fails to export one) and roughly half of them exported successfully. After digging around for a while, I figured out that the XMP files were missing for the photos that failed to export. (note that I created this screenshot after figuring out the wor

Hi, I'm using LC vers. 14.0.1 on Mac. I've got a few folders which are synchronized with the cloud, and that usually works pretty well. Recently I added 122 new pictures to a folder but only 7 (!) of them got synchronized. I don't see any error messageand in the sync preferences window it says there is no sync going on or files stuck:I've tried to figure out if there are any differences between the pictures that sync and those that don't but found no reason (i.e. smart previews or not, files missing, videos or others).Any ideas how to "force" the upload to the cloud of those pictures? Thanks!

Recently I have issues with previews.  For example - today I built 1:1 previews for a collection of images.  Several hours later, there are no previews while working on the collection, and I have to build them again.I do have the preview cache limit set to 250GB but my preview size is still arounf 100GB Anyone else recognise this problem? Could it be that when I close the catalogue and choose the 'optimize' option, that somehow the previews are being deleted? 

Buonasera, ho da poco acquistato il pacchetto fotografia da 20 giga e subito ho notato il seguente problema. Sia su Lightroom classic che Lightroom  non funziona la rimozione generativa Ai. Mi dice che non è possibile applicarla e di controllare la connessione a internet. Il problema è che io sto sempre connesso a internet. Su Photoshop invece non funziona il Riempimento Generativo Ai e mi da sempre lo stesso errore dicendo di controllare la connessione internet. Qualcuno mi può dare qualche consiglio? Grazie.

After importing images from my source folder, the thumbnail images are dimmed out in Library mode. Any suggestions ? Macbook M1, OS Sequoia 

HAllo, hab seit neustem das Problem das Lightroom classic sowie gefühlt jedes Programm was ich nutze von Adobe, Photoshop, Premiere Pro, after Effects extrem langsam sind, kein einziges Programm auf dem Rechner macht zicken, nur die Adobe Programe.   Eventuell hat ja jemand ähnliche Erfahrung und hat nen Rat? Bin kurz davor mein mein creativ cloud alle apps zu kündigen und mir was anderes zu suchen, bekommt man echt graue Haare bei.   Cache lösche ich regelmäßig.  Auf der Platte wo die Bibliothek liegt sind noch 200GB frei.    hier mal die System Info aus LRC: Lightroom Classic-Version: 14.0.1 [ 202410161356-30922cfc ] Lizenz: Creative Cloud Spracheinstellung: de Betriebssystem: Windows 11 - Home Premium Edition Version: 11.0.22631 Anwendungsarchitektur: x64 Systemarchitektur: x64 Anzahl logischer Prozessoren: 12 Prozessorgeschwindigkeit: 3,7GHz SQLite-Version: 3.36.0 CPU-Auslastung: 0,0% Stromquelle: Angeschlossen Integrierter Speicher: 32694,0 MB Dedizierter

I have been using the AI Denoise just fine for a couple weeks on NEF files in Lightroom and now it says it is not compatible. What has happened?

I tried to introduce the linear profiles of my cameras via this way, but they don't appear in Lightroom.What's wrong?Thanks