Lightroom Classic

The day I upgraded to version 13.3 (5.2.23.24), only the photos prior to that date are synced. All new photos and edits are not synced. The "migrating sync data" has been running since the update, with no end in sight. Any assitance would be appreciated. Dana

Ich nutze auf meinem MacBook Pro mit M1 Max Lightroom Classic 13. 3 und kann meine Fotos damit kaum noch entwickeln Sämtliche Regler lassen sich nicht mehr zuverlässig bedienen. Beim Einstellen springen die Regler Plötzlich auf Null oder sonst einen Wert. Der Reperaturpinsel etc. arbeitet nicht flüssig. Ich möchte eine Stelle damit stempeln, aber sobald ich den Pinsel verschiebe bricht die Funktion ab. Kurzum sämtliche Regler im Entwickelnmodul spinnen bzw. funktioniern nicht stabil Warum? Kann mir das Jemand sagen? Gruß Martin Ernst

Copying Settings to paste but when I try to paste to 500+ photos it only pastes the setting on one photo.What am I doing wrong, currently im trying to copy the aspect ratio to ORIGINAL and paste those to all photos, but it only pastes it to one of the 500 photos I have selected... this is very annoying

Bonjour,  mes photos s'affichent bleues dans le module bibliothèque de lightroom et normale en aperçu lorsque je suis dans le menu développement. cf photo. de plus les roues chromatiques du colorgradind sont comme desaturees. cf photos    merci d'avance pour votre aide. bonne journée 

I'm exporting Jpeg to place them on Google photo's. I have a lot of trouble to get the sort right. The date and time stamp of the Jpeg's after export is not in sequence. It looks that Lightroom is working parallel. Is there a trick to get this right?

After installing Lightroom 13.3, my export dialog box is all white in the middle and no text is visible (see screenshot).  Has anyone else experienced this? Once I installed the update, the "what's new" pop up was light grey with white text and barely readable also.

Hi,I would like to change the brush flow in the masks after I apply it. Now if I select the brush in a mask and move the flow slider it does not change.How can I do this?Regards Fabio

Bonjour, depuis V13.3 de LRC mon R6MII est bien reconnu en mode prise de vue connectée. Mais je n'ai aucun retour image dans bibliothèque après une prise de vue. Même constat avec mon ancien 6D PC sous Windows 11 Je viens d'essayer sur un autre PC en Windows 10 et là cela fonctionne. Merci de m'indiquer si réglage particulier à faire dans Windows11. Frédéric.

Hi I currently use a laptop PC when travelling with LRc and import into my main PC  LRc catalogue on my return.Can you simply do the same from a MacBook air catalogue and import into the PC catalogue?Regards Andrew 

Hello,Untill now I have been using Lightroom version 6 with the software on a Windows PC (version from a CDRom, no Adobe account, my library is saved on the PC). I wish now to subscribe to Lightroom Classic (Saas mode) on a MacBook. The Windows PC is old and I will not keep it.Is to possible to keep the existing lightroom library from version 6 and "transfer" or store it on the account I will create, so that I don't lose all the modification steps done on the pictures ? Many thanks.

After installing LR Classic version 12.4, the Intensity Slider for Presets is not available anymore. Had to downgrade to version 12.3, now it's working again. Please fix it for v. 12.4 and newer versions.

I have a collection of 100 photographs. I apply a filter to them that creates a duplicate PNG. As a result, I end up with 200 photos in the collection.Now I need to export all new photos. Selecting one at a time is a very long time.How can I do it?Perhaps you need to somehow remove the original photos from the collection? Or create a new collection from new files? How to do this quickly for 200 photos?

I worked in computing for 40 years so had no issues when photography went digital. Landscape photography was a great hobby for us happy loners. However, when I moved to a small town, I joined the local camera club to meet other photgraphers. I have gradually learnt that almost all them have no real idea how computers work. Windows users grudgingly acknowledge this and most macOS users are fiercly proud of it.I recently learnt that most of my club colleagues believed that the Lightroom "Import" function was literally importing their original files into the Catalog. Being IT aware, I understood what was happening when I read the early version user manuals. Most of these people are younger and learning it the 21st century way, 'guess and try'. So its understandable that they took the word "Import" on face value. This has contributed to 3 of them probably losing years worth of image files, if they can't be recovered from faulty laptops by the local repair guy, who it seems doesn't know muc

Hi everybody, When I plug in either of my two main drives, I now have three catalogs: version 12, version 13, and the latest version 13. I don't remember. Is it safe to delete the earlier versions?

I have Lightroom Classic 13.3 on Windows 10.  I have unlocked the markers, but I still cannot move them manually.  If I try to move them, the whole map moves.

When I open Lightroom Classic 9.3 on my Windows 10 x64 PC it's started behaving very strangely: it's like there's a key stuck on my keyboard...  it scrolls through the menus, it scrolls through the pics, and any pic I try and open in either library or develop it won't stay with it: just goes on to the next onePlease see videos for better explanation!I have:reset preferences (no change);updated graphics driver (no change);disabled Graphics Card accelleration (no change);uninstalled and reinstalled Lightroom (no change);unplugged Wacom Tablet (no change)Unplugged Loupedeck+ (no change)Uninstalled Loupedeck+ software (no change).Uninstalled 9.3 and reinstalled 9.2. Same problemAm not having this issue with any other software, other Creative Cloud apps included.Any more ideas for things I could try? Any ideas what the problem might be?Many thanksMarkWindows 10.0.18362 64GB RAM, lots of free HDD space. Cache on dedicated drive.NVidia GTX980 driver WHQL 451.48

Hi, the whole day I have been editing in Lightroom Classic. But when I closed it at the end of the day it came with a message that it couldn't make a backup and it just closed. Then I tried to open lightroom again, and it now tells me my catalog is corrupted and that I need to repair it. But when trying to repair it the green bar is stuck at the end.  If I can't repair it my whole day of work will be gone... I have had this problem one time before, like a month ago but different. Then the catalog was corrupted and the last 2 backups to, so then I needed to go back to the third backup and work again from there. But the problems are back now...

En important des fichiers ils sont déjà pré-développé, mais d une manière énigmatique. On dirait , le processus d'importation prend des paramètres de développement d une autre série de développement déjà fait et les applique dans la séquence de l'ancien travail pendant l'importation...Pour éviter cela j'avais trouve une solution préliminaire dans le passé en décochant la case " Ne pas importer les éventuels doublons" et ça marchait.Aujourd’hui j' ai beau dire a LR de faire pareil, les photos importées sont déjà développées même si l'importation est fait avec "Param. développement: Sans" et seulement mon nom dans les Métadonnées. Pour compliquer la chose, une deuxième tentative d 'importer les mêmes photos( après avoir effacer la première tentative, évidemment) mène a une application de différents paramètres de développement qu'a la première tentative. (voir les deux impression d écran ci-joint)D'ailleurs , l'importation des fichiers .jpg ne crée pas ce problème.

Good afternoon. I am a new transplant to LR Classic following years of using LR6 on a 2013 iMac running Catalina. I purchased a 2018 Mac Mini and monitor to take advantage of the latest IOS as well as the newest iteration of LR Classic. So, muggins here attempted to transfer my 13K photos off of LR6 to the MM via a external drive. I followed the suggestions for transferring. Suffice to say, when I thought all was good,I deleted the files off of the external drive and trashed what was in the trash.. Come to find out not all photos tranferred and I lost between 4K-5K photos.. So,, my thought is to delete the entire collection of photos off of LRC and start again by sorting the remaining photos on my old Mac and then transferring the remainders over to MM via the external drive. Is there any hope to find the lost photos which were deleted and deleted again before I go back to square one. Thanks.  

I recently updated LIghtroom Classic to 13.3 and i noticed that the clipping triangles are misssing from the Histogram. 

This is not a new issue, so I am surprised to not see others comment:Render out a site using the Track web template, then open it up on desktop, mobile, etc. Scroll down the thumbnails page and you will see that very frequently not all of the images show up right away. It's the last bunch that are missing in action.To get them to show up I can sometimes refresh the screen, but that usually doesn't work. Making the page view smaller, often smaller than the normal 100% is needed. This kicks it into action and boom, we see the last bunch of thumbnail image. What viewer is going to know such efforts are needed to see it all? None.On mobile it is even worse. A gallery I just made and posted online had 175 image. Bringing it up on my desktop I was missing the last 5 or 7 or so images. But bringing it up on a few phones (mine and others), we only saw the first 5-10. And nothing we could think to do would allow the others to show up.

I'm running LR CC Classic 8.0. and want to update to 8.2. Creative Cloud says that there are no updates. Auto update is checked on.If I check for update from in LR, I get "Updates have been disabled for this machine. Please contact your administrator"

Hola buenas, tengo un problemilla con lightroom.Cuando hago máscaras, ya sea con objetos o sujeto, se generan unos artefactos muy raros como se puede observar en la captura. He reiniciado el programa y el pc y sigue sin quitarse, no creo que sea problema de la cámara porque cuando elimino la máscara desaparecen los artefactos.  

Seit gestern blobbt ein Fenster mit der Meldung: "Deine Seriennummer, mit der dein Programm aktiviert wurde, ist nicht mehr gültig. Und dem Hinweis, das dieses Produkt in 5 Tagen deaktiviert wird."  Und es wird einem gleichzeitig die Software der Cloud zu einem ermässigten Preis angeboten.Da wir die Lizenzen gekauft haben und bisher immer damit gearbeitet haben, ist es uns unklar, wieso die Nummer plötzlich nicht mehr gültig sein soll. Es betrifft die CS6 Suite. Für das was wir arbeiten, reicht diese völlig aus, wir möchten nicht auf die Cloud umsteigen. Inzwischen ist mir auch bekannt, das es auch anderen mit "alten" Versionen von vor 2022 so geht.  Kann uns da jemand bitte helfen? Danke.

I am using AI Denoise on roughly 700 images at a time. This usually takes 12-40 hours to acheive, and usually it works, sometimes the program crashes, and I have to restart. The trouble is that I haven't found a simple way to denoise only the ARW images that have not yet been processed. When I open Lightroom again, it appears that roughly half of the ARW images have accomanying DNG images that have been denoised, but they don't appear to have been processed in any particular order, so I can't simply select the second half of the image set and resume from there. And if I select all ARW images and resume, there does not appear to be any option to skip processing images that already havea  corresponding DNG. Is there any way to simply select all ARW images that do not already have corresponding DNG images? Or to sort ARW images in the same order that Lightroom processes them so I can simply select all the ones after the last one that had processed? Or to resume batch denois