Lightroom Classic

Please see the attached screenshot.   Lightroom Classic version: 14.5 [ 202508061311-4cef2162 ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Home Premium EditionVersion: 11.0.26100Application architecture: x64System architecture: x64Logical processor count: 24Processor speed: 3.4GHzSqLite Version: 3.36.0CPU Utilisation: 0.0%Power Source: Plugged InBuilt-in memory: 65325.1 MBDedicated GPU memory used by Lightroom: 8658.9MB / 15907.0MB (54%)Real memory available to Lightroom: 65325.1 MBReal memory used by Lightroom: 13382.6 MB (20.4%)Virtual memory used by Lightroom: 24487.6 MBGDI objects count: 1282USER objects count: 4266Process handles count: 12655Memory cache size: 14467.4MBInternal Camera Raw version: 17.5 [ 2318 ]Maximum thread count used by Camera Raw: 5Camera Raw SIMD optimization: SSE2,AVX,AVX2Camera Raw virtual memory: 4694MB / 32662MB (14%)Camera Raw real memory: 4707MB / 65325MB (7%) Cache1: Final1- RAM:1498.0MB, VRAM:2105.

The Nikon Z5 II Raw Files (NEF Files) are having a known probem in LR Classic, including the very latest release 14.4. Here is a link to a YouTube video detailing the problem, and a summary of the video with chapter markings. It's a known issue, and thousands of people are discussing it on multiple social media outlets. Lightroom Classic will read the RAW files from the Nikon Z5 II, but when "auto" WB is applied, a magenta cast takes effect. I spoke to an Adobe rep today. We could not troubleshoot it. Nikon says it's an Adobe issue, and I agree, as this issue does NOT occur in Capture One, or Nikons own software. The JPEGS from the camera are great and as long as "AS SHOT" is applied in LR, it works, but any other WB settings (Auto, Daylight, Cloudy) etc... leans the file so far into magenta, it's unusable. I also tried using the eyedropper tool on a grey card, and it also leans magenta. I am on Mac OS, Sequoia 15.5. Anyone else having this issue? How can we escalate it to Adobe s

I have been experiencing a persistent rendering issue in both Lightroom Classic and Lightroom CC for over 3 months. The problem occurs on HiDPI/4K displays (including my laptop’s 2880x1800 screen and dual external 4K monitors). In Lightroom Classic: Develop mode only displays the photo in a quarter of the image area. Library module displays normally. Disabling GPU acceleration fixes the problem, but this is not an acceptable long-term workaround. In Lightroom CC: Both Grid and Detail view only show the image in a quarter of the expected display area. Unlike Classic, disabling GPU acceleration does not help. System Info (from CC): Lightroom CC 8.5 x64 [20250805-2023-ec91a85] OS: Windows 11 Pro (2009) [System Info reports as “Windows 6 / Windows 8 Pro (2009)”] Laptop: ASUS Zenbook 14 UX3405MA (Intel Core Ultra 9 185H, Intel Arc Graphics, driver 32.0.101.6314) RAM: 32 GB Displays: Laptop (2880x1800), 2x 4K externals (at other residence), currently tested with 3x 1920x1080 externals + l

I have Windows 10 Pro and Lightroom Classic 14.5 installed.I've been experiencing system instability issues since early 2025.Lightroom has corrupted my catalogs and is almost impossible to work with, because the error appears just 10 seconds after opening it.There's no time to load the photos into the gallery.Sometimes the catalog lasts a little longer.But then it crashes when I try to import photos.Or it crashes when I open the print module.The errors are constant, and I can't find a way to resolve them.I've uninstalled Lightroom to install previous versions, and it didn't work.I've formatted my PC to rule out operating system installation errors or possible driver errors.I've installed the latest version of all the drivers for my computer.However, Lightroom still crashes.I've opened my catalogs using the "catalog integrity check" option, but Lightroom doesn't detect any errors.However, once the catalog is launched, it causes a crash error again.After each error, Lightroom asks to che

Hi all!  I've tried searching out the answer to this issue using multiple search queries but haven't been able to find this question previously asked/resolved.  I did spot some issues that had been posted about regarding Mac computer permissions, and making sure to select "Copy" (as opposed to "Add") in the import dialogue, but neither seemed applicable here. However that said, apologies in advance if this has been asked before and I just was unable to come up with the magical question words to plug into Google. SYSTEM SPECS: I'm currently running Lightroom 6.10 on a Windows 7 computer with two internal drives: an SSD as the primary drive with the OS on it ("Local Disk (C:)") and an HDD where I store the bulk of my files, including my photos ("RUSS (B:)")BACKGROUND: Historically when I've imported photos off of my camera/memory card my workflow has been to have the "Don't Import Suspected Duplicates" option checked, with the Destination panel set up to organize the imported p

Hello,   I am experiencing a recurring issue with the Sky Mask AI tool in the latest version of Lightroom. After creating a Sky Mask, it initially works fine and appears in the Masking panel. However, when I close and reopen Lightroom (or sometimes after syncing), the Sky Mask remains in the list but becomes completely empty, as if the detection has disappeared.   Important details:   The mask is still listed in the Masking panel, but there is no selection inside it. This only happens with Sky Masks. Other AI masks, such as Subject or People, are preserved correctly. I have already tried clearing the cache, updating Lightroom to the latest version, and disabling GPU acceleration, but the issue persists. I am working with RAW files, and the problem repeats consistently.     It looks like the Sky AI detection is failing to reload after reopening, leaving an empty mask. Could you please confirm if this is a known bug and if a fix is planned?   Thank

 Hi! I have had an imac m3 16gb ram for 1 and a half years and editing on it is fantastic, truly amazing!I have had an new imac m4 in my studio for a few weeks (with better ram - 24gb, and better processor version)  and today I noticed something that tires my eyes and slows down my work. This effect is blurring the photo for a moment after zooming or using any slider or editing option from the program. I started searching the web and read about suggestions with creating previews for optimization and direct catalog optimization itself. Unfortunately, it does not help. I noticed that on my imac m3 I have the use of the graphics processor turned on, (on automatically) and probably thanks to this I owe the comfort of work for the eyes and fluidity at my home. Unfortunately, according to the information that Lightroom gives me in the settings I cannot turn it on on the imac m4 in my studio because it is not supported, the option is not available, not clickable, grayed out. I have

Trying to print a 11x14 but it will only print 11x13 1/4.  The last 3/4 is just blank, white space.  All the settings say it is set for a 11x14 borderless. The picture on the screen shows the complete picture.  Never prited anything this big.   Beginer.

I am using latest version of LrC. When I exit lightroom with backup option, I am receiving error message 'unable to backup the catalog  please check folder permission and, make sure that you have available space' I have checked folder permission and space is also enough. This is happending after ver.14.5 upgrade. I have reverted to previous version 14.4 now not getting error. Please address the issue.

Hi, I've just downloaded a set of images but when I come to look at them they are 'Greyed' out. Saying that they appear to be duplicates? The original files are there in my pictures folder but not on LR. I've obvioulsy pressed something but cannot sort It out. Please help! Thanks In advance Andy

As expected, increasing the shadows in an image reveals noise in those regions. However, when a photo in HDR mode has the clarity in the SDR Conversion settings set to roughly -80 or lower, increasing its shadows doesn't just reveal existing noise, but creates new unwanted noise pixels in those regions. These pixels are almost always entirely red, green, or blue, distractingly bright, and can appear in nearly any raw photo.   When the image is taken out of HDR mode, the pixels disappear. In HDR, I only found four ways to remove these pixels outside of masking and manual editing: >Set the entire image to black-and-white mode. >Increase the clarity in the SDR conversion settings. -80 or higher is usually enough to remove them. >Increase the clarity in the tone mapping settings. +15 is usually good even with the clarity at -100 in the conversion settings. >Perform an AI Denoise. >>On the other hand, AI Super Resolution creates even more of these pixels.  

I use Lightroom Classic and more than once the Select Background and the Select People Masks introduce a very fine white outline to subjects.  It is particularly noticeable with with B&W images that have dark subjects against a light background. Has anyone else experienced this and is there a workaround in LrC? Thanks, R

Hello. I used Adaptive Color Profile when it was first released but I seem to be having issues with it now. When I select it it is making zero changes to the image. The Histogram isn't changing at all (it was, significantly in cases, when I first used it).  Using LRC v14.4 on MacOS 15.5 on a 13 inch 1019 Macbook Pro. Screenshots attached when bot profiles applied with no adjustments made elsewhere.

I have tried updating Lightroom Classic from version 14.0.1 to every version from 14.1 - 14.5 but in each update after 14.0.1 the Library Module isn't fully functional. I can see the History panel and Keywording panel, for example, but the information in the panels is missing. I thought this issue would have been resolved with this latest update, but no such luck. Help!

I have been trying to launch PS from Photoshop Beta. It won't. Uninstalled it. Installed PS 2025. still not working.  

I have tried to update Lightroom Classic on my laptop. The last time I used LrC on my laptop was in 2018. When I try to open LrC I get the error message "Lightroom encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom". Can someone please offer suggestions to fix the error?

Running Lightroom Classic on Windows 11, I am not syncing to cloud or currently using Lightroom Mobile.  Recently Lightroom Classic leaves background process running after exiting (visible in Processes Tab of Task Manager).  So to reopen LR Classic, need to first kill the left over process or restart Windows.  Have tried resetting preferences to no effect.  Catalog is optimized. Program seems to run ok, and everything else seems to work fine.  Any ideas out there?

When the catalog setting Write Date Or Time Changes Into Proprietary Raw Files is enabled, Save Metadata To File will incorrectly modify a .CR3, changing its EXIF:DateTimeOriginal.   This bug was introduced in LR 14.4 -- it doesn't occur in LR 14.3. Tested on Mac OS 15.5. To reproduce:   1. Download and open this very small catalog: https://www.dropbox.com/scl/fi/q8h2ewc5tf3snplofz1j8/raw-capture-time.2025-06-29.zip?rlkey=nggfak157pvulk12a5mhcjgsu&dl=0   Observe that the Metadata panel shows the .CR3 has Capture Date/Time: 6/29/25 1:26:10 PM.   2. Open the "pics" subfolder in the catalog folder in Finder with View > As List. Sort the view by Date Modified. Take note of the Date Modified for the .ARW and .CR3.   3. Select both photos and do Metadata > Save Metadata To File. Observe in Finder that the Date Modified of the two files hasn't changed and that there are now two .xmp sidecars (correct).   4. Set the option Catalog Settings > Meta

I created a Collection which I want to turn into a book in the book module.  The 1st screenshot shows that Collection.  When I then go to the book module, the previous photobook I created comes up - which is based on a different Collection.  Even though I am still inside the present collection I created in the Colletions panel, Lightroom *thinks* I want the book I previously created - not so!  I want to start a new book.  I don't see a "clear" option inside the book module.  How can I start afresh?  Thanks.     

My wife shoots Nikon, I use Sony...when I upload both sets of photos to a folder in LRc and sort by capture time, it sorts by time only within the respective file types (.NEF vs .ARW)...does anyone know how to fix this so all the photos are sorted by capture time?

Was about to upgrade but Chat GPT is talking about some serious bugs people came across going from 15.2 to 15.6 like catalogue corruption and masking not working and more.I am wondering how widespread is it? anyone here have big issues?

I've a tech background and simple user on and Lightroom Classic (win10 with 16 RAM)LR sometimes crashes but not every session or version.The Problem:after I added a RAW image library, I went through 800 images and added a star-based and color-based rating and processed a few images as leading protype or template for othe images.After closing Lightroom,  it asked to back up (crashed before or hanged so many time so i ignored that most of the time) I tried to point it to a new catalog location but it got stuck in the process (again).after long night I open it, Lightroom shows me the new library but from of all the images it only shows only 5 with the rating and color marking.Additionally, after restarting LR, I am unable to mark images with a rating or color. LR seems to ignore the color markin AND rating and not display image according any filtering.EDIT: On the third restart of LR I can mark and see the filtering. but I REALY want to understand why it's happen.In a side note

Bonjour,Lors de la dernière mise à jour Lightroom Classic, plusieurs erreurs de fonctionnement. Message d'erreur lors de la suppression de bruit. Et aucune mise à jour des suppression IA.J'ai eu le service technique et la seule solution trouvé a été de revenir à la version 14.3.1.Mais depuis je ne peux plus exporter mes photos en sRVB.La fonction ne met même plus proposée dans l'export.Merci pour vos réponses