Lightroom Classic

In my grid view, many of my images have an exclamatiom point.  When I click it, I get a dialog box that says that there was "an unknown error while writing metadata to this photo".  I believe this happened long ago.  The image is a raw Canon CR3 file.  There is no sidecar in the directory.  I believe this happened when I disconnected the NAS that the raw file is on.  I never asked for the metadata to be written out nor do I have the option set to automatically write out the metadata.  But... all that is in the past. The dialog box gives me three options: Retry the export, Import Settings from Disk, and Cancel.  What I'd like to do is just forget it -- basically reset the error flag but there I don't have that option.  But I'm hoping, maybe there is a way to reset it that is not obvious. My second backup hope is there is a way to select just the images with this error and hit update and walk away as it toils about creating the sidec

Hello I'm trying to solve an issue that has annoyed me for sometime. In Windows 11, when I try to important RAW files and am selected my desired images the preview appears unsual with pixelation and a low contrast apperance (see attached image). This seems to be correcteed once image is imported in the library and develop module but makes selecting the best image for import really difficult. I should mention the issue also appears in the smaller Navigator view in the top left and also the film strip once I'm in the libary/develop modules but this is less annoying as I've already picked the images at this point. Can't understand why this might be. Have kept LR up to date as well as monitor firmware (Alienware AW3225QF), video card etc but to no avail. Any help would be appreciated.

MEU LIGHTROOM PAROU DO NADA DE FUNCIONAR A REMOÇÃO DE IA GENERATIVA, EU TAVA USANDO EM UM PROJETO E QUANDO TERMINEI ELE E COMECEI OUTRO ELA PAROU, DANDO "FALHA, VERIFIQUE SUA CONEXÃO" EU REINICIEI TUDO, INTERNET, COMPUTADOR, ETC, DESATIVEI FIREWALL E NADA RESOLVE. TO COM TRABALHO URGENTE PRA FAZER E TA TRAVADO. ESSA IA DA ADOBE ALÉM DE PÉSSIMA, DÁ VÁRIOS ERROS E AINDA COMEÇARAM A COBRAR NO PHOTOSHOP COM CRÉDITOS, JÁ PAGAMOS UMA MENSALIDADE ABSURDA E AINDA COBRAM PELO USO DA IA

La versiób 15.1, no me deja utilizaer la herramienta de quitar el polvo o manchar del sensor en las fotos. La versión antefior si me dejaba. Que debo de hacer?

I shoot photos for a news outlet full-time with three different cameras. I have a Sony A1, a Sony A9ii, and a dji mavic pro 4. I edit on my 2021 16 inch MBP with 16gb RAM. I updated lightroom the other day and I've noticed that culling through the raw photos, arrowing through as I make selects,  from the A1 and the mavic 4 pro (Bigger files than the a9ii raw files) has all of a sudden become incredibly slow. Each photo takes a moment to load and this makes going through a card of two thousand photos to make my selects pretty frustrating. It's being read from a CF express card in a reader into a usb port that's always worked flawlessly. Going through an SD card of raw files from the a9ii works as it should still... Just having problems with the bigger A1 + Mavic 4 pro files. I have minimal previews on, use GPU and use GPU for preview generation has always been on auto. I've purged the cache and upped the cache size to 20gb. I have 250gb free on my hard drive. I've tried r

Hallo zusammen! Folgendes Problem ist mir auf einmal untergekommen, nachdem ich einen neuen PC eingerichtet habe und meinen Lightroom-Katalog darauf übertragen habe:- in zwei Ordnern (von sehr vielen) tritt bei ca. 90-95% der Fotos die Meldung auf "Ein unbekannter Fehler ist aufgetreten.", wenn ich das Foto in groß öffnen will oder ins Entwicklungsmodul gehen will. - Bearbeitungen lassen sich an diesen Fotos gar nicht vornehmen, alle Regler ausgegraut (siehe Screenshot 1)- Beheben lässt sich das nur, indem ich im Bibliotheksmodul per Rechtsklick die Entwicklungseinstellungen zurücksetze (was ich eigentlich nicht möchte, da ich fast alle Fotos bereits bearbeitet hatte)- kurios ist halt, dass einige wenige Fotos davon nicht betroffen sind, da ist die Bearbeitung noch komplett vorhanden (siehe Screenshot 2, die mit Ausrufezeichen sind die mit Problem)- und kurios ist, dass das Problem bisher nur bei 2 Ordnern aufgetreten ist... Jetzt die Frage: weiß jemand, woran das liegt

this is very similar to this issue: https://community.adobe.com/t5/lightroom-classic-bugs/p-develop-module-doesn-t-detect-external-changes-to-original-file/idc-p/12262241/page/2#M4538 however this is happening on the latest Lightroom Classic when i press edit in DehancerLightroom.exe, after I edit externally and press save, the .tif file is shown in the Develop module however it is not reflecting any changes. when i move the tab to the Library module, then I can see the change. I've tried everything, moving back and forth, changing the view, making some edits in the Develop module etc. nothing worked until I reset the Lightroom Classic. I can only view the change in Library module

J'ai beaucoup plus de bruit sur LRC avec mes images brutes que sur Affinity ou EDIT . Un règlage aurait il changé depuis une quinzaine de jourMerci d'avance pour ceux qui ont une réponse.Bonne journée

Bonjour, Les poignees et contours de masque (ni l'incrustation) ne s'affichent plus dans lightroom classic version 15.1 sous PC. Pourtant j'ai cliqué "afficher l'incrustation "en rouge et afficher les épingles d'édition "Toujours". Connaissez vous le même problème? Si oui, avez vous trouvé une solution?   [moved to the correct community for Lightroom Classic - Mod.]

From the past few days , my lightroom classic does not open . i have tried everything from a clean reinstall. to removing everything adobe related from my pc , files , regestry etc . but lightroom does not open. i tried changing the prefrences manually from appdata roaming adobe lightroom preferences.agpref to turn off the gpu part . but nothing is working .  my specs are\ rtx4050 6gb , 16gn ram, 512gb ssd , windows 11 , inteli5 13th generation laptop  

I updated Lightroom Classic to v15.1, and also installed Lightroom to check it out.Now, when I start Lightroom Classic, it claims that my catalog is corrupt, then tries to rebuild it, and hands during the process. I've tried with recent backups and ancient backups; the latest version of the app claims they're all corrupt, which I find extremely unlikely.I tried downgrading to the earliest I could get onlike (v14) but no luck. The same crash happens. I'd like to try going back to v12 but I can't find anywhere to download that online. Can anyone recommend a solution that isn't "make a new catalog and lose all of your collections for the last two decades"?   [moved from bugs to discussions according to the community rules - Mod.]

I have been having this issue for months now in Lightroom Classic. Every once in a while, I will try to create a mask and it simply just doesn't register. I click to create one and it won't create one, and it doesn't matter what kind of mask. I have shared remote access with multiple adobe agents, who will reset my preferences, and then assure me my problem is fixed. It is usually fixed for a little while, but then will pop up again. It came to a point where I had to beg for the phone number over chat just to talk to someone over the phone. Even then, it took me six tries calling the number before I reached anyone. And then that person was being difficult when I kindly asked to speak to a supervisor just to get a second set of eyes on the issue over the phone. There's more I could complain about with adobe support.   Anywho, I'm having the issue again and following the same steps the last agent did. I go to preferences in finder and change the CC7. plist file to CC7.old.plist. The

AI Générative, j'ai un message m'informant que impossible de traiter ma demande et de reessayer ultérieurement. avec lightrrom LR ca fonctionne

Hello, I tried to connect my GFX50SII to lightroom but it's not working anymore. Is anyone had the same issue and found a solution? Thank's!

I have just finished relocating files/photos from various drives to a new NAS. I moved the files within Lightroom. Almost all files have been moved without issues however, I do have a handful that indicate the file name already exists within the location and therefore won't move the file. Upon reviewing I verify the file does not exist at the location, however, each attempt to move I receive the message the file exists. Anyone else receive this message? What causes the message?  Suggestions to resolve the issue?Thanks

Als ik een masker wil maken dan crasht de laptop steeds. Ik heb alle updates gedaan van zowel het programma zelf als de laptop, gpu, etc. Heeft er iemand een oplossing?

Cómo eliminar los signos ! y ? en mi LrC verdión 15.0.1 que aparecen en mis archivos de fotos de años y dias? Uso Mac OS Sequoia 15.6.1.

I’ve used Adobe Lightroom for years and have always relied on three 6TB external HDDs (made by G-Tech) to store my photos and Lightroom catalogs. One 6TB external drive serves as my primary drive, holding my images and catalog backups, while a second 6TB drive is a full clone created with Carbon Copy Cloner. I also use Backblaze for cloud backup of my external drives’ photos and catalogs to be as thoroughly secure as possible. Just the other day, my primary HDD external drive became “toast” due to what appears to be a firmware failure—even after assistance and confirmation from Apple technicians.  (I suspected that the new macOS 26.2 update may have triggered the issue, but that’s another story.)  Unfortunately, there was no Apple solution. Now I need to purchase a new 6TB external drive as a replacement.  Should I move to a 6TB external SSD instead of another HDD, and if so, which models have worked best for you?  I’m currently using a Mac Studio with a 1

Hi All - I want to apply a color selected with the point color dropper to a mask. Not finding an obvious way to do that, and haven't found anything useful in help or community...

Product:Lightroom Classic (Windows, version X.Y.Z)Description:When using AI Denoise repeatedly in a single session, performance degrades non-linearly. Initial denoise operations complete in seconds, but after processing multiple images the same operation on the same image can take many minutes. Restarting Lightroom Classic does not restore normal performance. Restarting Windows immediately restores AI Denoise to normal speed.Steps observed:After launching Windows and Lightroom Classic, AI Denoise processes high-ISO RAW files at normal speed. After denoising multiple images in succession, AI Denoise becomes progressively slower. At a certain point, processing time increases by orders of magnitude even when applying the same denoise settings to the same image. Closing and reopening Lightroom does not resolve the slowdown. Restarting the operating system fully restores normal denoise performance.Expected behavior:AI Denoise performance should remain consistent across repeated operations w

I recently noticed that the info data was no longer visible in my grid view. Restarts and recent LrC upgrades did not help. I tried to apply the steps used for the v14.x versions to work around the missing info in the Develop mode to no avail.What did work for me:  View->Grid View Style->Expanded CellsDoh! Somehow, the Grid View Style -> Compact Cells was enabled.  Did I inadvertently press J and cycle to the Compact Cell style? No idea...  So posting this for anyone needing to change this Grid setting.  It was for me less than obvious.MacOS v15.6Mac Studio, M2 MaxLrC v15.1I will assume this setting works similarly on WinX

Lightroom Classic version: latest (Creative Cloud, fully updated) Version 15.1 OS: Windows 11Camera files: Fujifilm X-H2 (RAW and DNG) Problem:Panorama merge always hangs at the background tasks"Assembling panorama" and "Saving metadata". The panorama DNG is created successfully and appears in the catalog,but the background tasks never finish and block Lightroom.After this happens, no further panorama merges are possibleuntil Lightroom is restarted. Deleting the tasks manually does not help. What I already tried (no success):- GPU disabled- New catalog- Catalog optimized- RAW converted to DNG and re-imported- XMP auto write disabled- Firewall and antivirus disabled- Files stored on local SSD- Preferences reset Reproducibility:100% reproducible.I can always create exactly one panorama after starting Lightroom.The second merge always hangs. This is a serious workflow blocker.

I'm a pretty fluid user in Lightroom.  I'm attempting to use Lightroom Classic and sync some images to my iPad.  The collection name/album name is syncing - but no photos.  I've tried going to Lightroom.adobe.com and seeing if something was blocking it, but it wasn't.  However,r if i add something to regular Lightroom, to that album/collection, it shows up. The hangup just seems to be on Lightroom Classic. It's not syncing out. Any ideas?

Hi! I'm a photographer that documents artworks for a living and I recently upgraded my hardware from an old mac to a new one and realized all the color profiles i've made from previous jobs are now missing. the old mac is now gone and wiped clean. I only got to transfer my Catalog and files (since its in an external SSD). For future reference, is there a setting to allow me to back up to the cloud all the color profiles or have them "baked in" to each file or maybe atleast included in the catalog file? Was hoping it functioned like an XMP thing beside the raw, or have it stored in the same folder that you made the color profile from. I now have alot of raw files that are no longer color matched to the original paintings as the DNG profiles ive created with the Xrite / Calibrite Digital SG Colorchecker are now totally gone (good. thing i have exported tiffs that are all finished). Looking forward to solutions.