Photoshop (Beta)
Recently active
using i5 12800K16 GB DDR4 RamRTX 3050 even i cant use this properly need a support
Good evening.I'm having a problem with photoshop beta shortcuts. When I lauch the app and start working everything is fine, but after some time on the app the shortcuts get mixed up and do not work altought they appear to be same. For example when I press CTRL+T it does not show transform options. When I press the tools shortcuts it does not activate the wanted tool...etc. Again, this problem does not occur when starting the app, it only happens after 10-15 minutes of using the app and things do not go back to defaults until I have restarted the Laptop.I have tried restarting the work space, checked the preferences and keyboard shortcuts menu, and everthing looks fine.Thanks in advance
Bar remains floating and does not find its anchor point under the menu any more. Only options bar is affected, all other tools and windows work normally.
Removal tool is bugged for week now.. 😞it give me bad result to remove small area
Every time i Open PS Beta 26.1 i get this " offer " from Adobe about extending my plan . Evry time i check " dont show this again " box. And it shows up time after time. Drives me crazy !any suggestions how to stop it ? Should be illegal.Result :I'm looking for alternative software,( iäm on Mac sonoma 14.7 / proper hardware )
Photoshop software is being disconnected from the Internet connection, while the rest of the apps and browsers are connected. It keeps asking to check for internet connection while using the generative tool.
backround tree
In quick mask mode, when selecting 50% gray with a brush, the generative fill in the beta version completely changes content after the update. In the normal version it works fine.
beta 26.1 m2815 crashes opening images.- even ones it generates itself Can i roll back to previous version?
Please be sure to check the steps attempted prior to this post. I am getting exhausted. The full release of Photoshop, version 24.6.0, is rebooting my machine as the previous Beta was doing in the original posts and thread. Please Note: I have stress tested my CPU with no issues. I have checked my RAM, reporting no issues. I have checked the Windows install drive with no issues. I have checked the Scratch Disks for space (2TB free) and integrity with no issues. I have uninstalled and reinstalled Photoshop. Problem persists. Most importantly: Photoshop is the only app that causes my PC to reboot. Adobe Premiere Pro, Audition, and Acrobat do not cause a reboot. Digital Combat Simulator set to High settings does not cause a reboot. Microsoft Office programs do not cause a reboot. All of these programs running at the same time with 10 tabs open in Chrome do not cause a reboot. If it is connected to a hardware failure, it is a connection that only Photosh
In Photoshop 2024 (25.10.0) Beta File > Generate does no longer generate correctly Using the generate command "dark glass background effect" produce a white background or similar see photo
Grats on the release of OCIO support. Before release I gave some readability feedback around the state of the exposure and gamma sliders. I see some improvements have been made that aren't in release yet. But perhaps it is still unintuitive now? It is super visible that it is 'disabled' but at the same time it looks like a glitch that the elements disappear completely. Would it be possible to just grey out the needle and text (and set it back to 0 during disabled state) rather than removing them? That should be more familiar to read and understand in my opinion.
(Ps Beta 25.1) When I use the Crop tool to expand my work area, Generative Fill automatically kicks in to fill that space for me. I would like the option to NOT do that until I ask it to G-Fill. I cannot find any setting to allow this. My primary use for this is revising logos and clip art from customers. All I want is to add a bit of visual elbow room so I can work. I don't necessarily enlarge my canvas area every time. Am I missing a toggle somewhere to turn it off? Is this a feature that Adobe thinks I want to have everytime?Thanks
The quick access sliders (next to the tool values - see attachment) in 25.12.0 don't work (at least for me); the icon still changes to the familiar finger and horizontal arrows. This is a 'bug' affecting all palettes, toolbars etc., excepting the 'Character' and 'Paragraph' palettes for some reason. I've tried uninstalling, removing preferences and reinstalling to no effect.
Hi there, Some basic info: OS: Win 11 Pro Cam Raw: 16.4 Ps Beta: 25.12 Issues: - After I adjusted settings and played around with the "Lens Blur," it will reset all the adjusted settings (e.g., brightness, contrast, mask, etc.) when I tried to view the original/edited using "\" key. I've tried to restart the Ps Beta, and it won't make any changes. It gets annoying when I forgot this bug existing, all the modified settings were gone. And, I cannot reverse to previous step (ctrl + z). Please fix it! Cheers, Jasper
When I try to open photos from LR 13.5.1 using the "edit in...", it comes up saying "Lightroom Classic and Photoshop 2024 are having issues connecting. Please reinstall Adobe 2024 Photoshop and try again”. Then you can only select CANCEL If I have Photoshop up and running this is the message I am getting “Do you want to open in Adobe Photoshop (Beta), Which is already running? If not please close and re try”. Open in Photoshop (Beta) or Cancel
When using the gradient tool, I have noticed the bracket key shortcut, to cycle through the gradient styles, has stopped working in the recent Photoshop (Beta) updates. I'm using 26.0.0. I'm on an iMac, Intel, OS 14.6.1. Thanks, in advance, for checking it out.
This no longer works... to create an oil painting - It still works in the non-beta version Channels Then “+” add layer Edit>Fill>Brightness (B) 40% code 666666 Reselect RGB Ctrl Click on the Gray layer Hit OK for the error message Generative fill “oil painting” or whatever
I've seen this used to transofrm a layer into an oil painting or sketch, but the workflow is not working: I've tried quick select > Fill 30% greyTurn off quick selectGenerative fill prompt "Architecture site plan" (or any prompt) = total fail (blue and white blobby nonsense). I have tried a 30% grey mask. I've tried a bunch of other opacities. I've tried creating an alpha channel, setting to 30%, clicking RGB thumbnail, selecting the alpha chanell, running Gen Fill = blue blobby mess (even with the prompt "oil painting"Is there a new way to do this, or am I doing something idiotic?
AI generate terrible human faces after the update
Hello Beta Testers!We're excited to announce the release of an improved Remove Tool in Photoshop (Beta), and we need your help to make it even better. As a valued beta tester, your feedback is crucial in helping us refine and perfect this feature before its official launch. We're unleashing the power of Firefly inside the Remove Tool – designed to enhance your experience by seamlessly replacing pixels with the best-possible results. The Remove Tool already has a virtual toolbox of multiple technologies available; it analysis your image and decides which is best to replace pixels you want to remove. Now we're adding generative AI as an option to ensure great results even with a large area or complex background. Here's how you can get started: Update Photoshop (Beta) Make sure you have the latest version installed. Explore the Remove Tool: Navigate to the Remove Tool in the Toolbar. Accept the Firefly Terms of Use: If you haven't already, agree to the Firefly
I've been using Photoshop Beta with Generative Fill for the past few weeks, and when it works it works well. However, one issue that I've had since day one is that it frequently causes my Photoshop to crash. Here's what typically happens: I select some area. I click "Generate" (doesn't matter if I put a promp in or not). The progress bar gets to around 80%. Dice are thrown, and quite often my Photoshop will just crash and close. When it crashes, 90% of the time the Photoshop window just disappears and I have to re-open it. 10% of the time I get some generic message saying there is some 'fix' found, where none of the suggestions fix it. I've been using Photoshop for years without issue, and it's only this one new feature that suddenly causes it to crash all the time. Also, sometimes before the Photoshop crash my mouse cusor will lock up for a few seconds. I've tried disabling GPU usage in Photoshop, forcing Photoshop's CPU affinity to just one CPU, and no matter w
Using the Gen Expand in ACR From LrC does the expand, but loses it when exiting ACR. MacOS Sequoia, LrC, MacBookPro 14 M2/32gb/512 Steps to re-produce1. Started with a 1024x1024 image in LrC and I sent this over to Photoshop Beta 26.1 as a Smart Object - so I could invoke ACR 17.12. PS Opens and I can invoke ACR 17.1 by dbl-clicking on the smart object badge in the layer panel - so far ok3. I do a Gen Ex within ACR to change the image to 16:9 from it's original 1:1 ratio and choose the best alternative. Again, ok. It has now filled in the background and expanded it to 16:9.4. I close ACR with [OK] and the image available in PS looks like the screen shot, below. The Gen Ex imagery is missing in the image (you can see the crop outline is 16:9 with the black behind it) - but if you see the layers panel, you can see it in the thumbnail. I can't find anyway to get the pixels in PS....so I close the image and lose the gen. I had some other difficulties - if I
I tried to move a bird with a clear sky as background but the bird gets distorted.Windows 11Version 26.1
En las últimas actualizaciones he notado que ciertas fuciones has empeorado en su funcionalidad. .- En la herramienta "Recorte", no se muestra en ningún caso la "Superposición de la herramienta recorte", ya sea ejecutando la herramienta directamente, ya sea ejecutándola mediante una "Acción". Tengo activada la opción "Mostrar superposición siempre" y tengo desactivado el "Mostrar el modo clásico"..- En la herramienta "Seleccionar y aplicar máscara", la herramienta "Pincel para perfeccionar bordes" cada vez funciona peor. Cuando lo aplico en el pelo me enmascara áreas que claramente están dentro del borde del sujeto enmascarado, ya sea pelo o piel. Esta herramienta fucionaba perfectamente hace varias actualizaciones y ha ido empeorando con el paso del tiempo. El pelo de piernas o brazos es imposible de discriminar actualmente ya que "pinta" el interior del brazo y no el borde..- La herramienta "Perfeccionar Cabello" es imposible de usar, ya que no recoge el borde del cabello llegan
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.