Photoshop Elements

Frustrated searching for hours how to resolve.purchased photoshop elements and premiere elements years ago and registered the serial numbber in my adobe account.I have no activated Computer in my account nor can i delete or modify the registered serial numbers.I purchased a new computer, the old is sweeped clean and I wanted to install the programs from the DVD which i still have. Now, I cannot start the program as it will not accept my serial number, I cannot change or modify anything in my account, have no 'registered' Computer to delete...What to do? Thanks for support.

I have Photoshop Elelments 2020 on Mac but now have a Windows laptop. Can it be downloaded for this or must I buy a new one?  

Hi, I am using Elements 2020, when go edit phots in Expert mode, the bottom menu applets keeps flickering and I am not bale to do any work , I have applied all latest update to Elements 2020Please see attahced sceen shot

    Yesterday I upgraded from Photoshop Elements [PE] 2018 to PE 2023.  I mostly use Irfanview [IV] for viewing and quick edits.  When I want to do something more, I open the file in PE.    After installing PE 2023, I opened a pic (from 2003) in IV, and decided I liked it enough that I wanted to use 'perspective crop', so opened it in PE 2023.  To my surprise, the sky in the pic appeared very blotchy.  I'd never seen that difference between the two programs' display of a picture before.  When I saved the pic with PE 2023, the resulting pic retained that blotchiness even when viewed with IV.  I haven't yet deleted PE 2018, so tried the same with PE 2018 and got the same result as PE 2023.  Looking at the original pic in IV, I see some artifacts in the sky portion, but not nearly so distracting in the PE versions.  If PE showed the same view as IV, I could have quickly removed the sky artifacts with PE's tools, but in the PE ver

Hi! I purchased PE10 and loaded it, using the DVD's, onto my Mac computer which is now so old that it wont run. I registered the serial number at the time I loaded the software.I have purchased a Windows Laptop that I want to load my software onto, however it has no DVD drive and Im unable to find my version to download. I tried to use the Adode Help service where it asked me to provide the serial number of the product and all I get is a message that the Serial Number is already in use - which I know. Contacting the Help Desk via chat Im told that PE is now 'End-of-Support' and all they wanted to do was sell me a new plan.Can anyone help me? If my computer wasnt so old that it stopped working, Id still be using the product I purchase - I dont want to pay again!Please and Thank you in advance. 

The lasso tool stopped working. It will not fill selection. How do I fix this?

ich habe seit 2000 je Jahr ein Elements-Katalog. Diese möchte ich in einen Koatalog zusammenführen, bei Beibehaltung aller Daten (zB Änderungsvermerk). Ist das möglich? 

I transferred a photo folder from a USB drive to my MacBook Pro. Successful. I'm using Photoshop Elements 2020. However, when I click on two of the photos, they do not open. All photos are  JPEG.   Four of the 30 photos have a Cloud icon beside them. I don't know why some have the icon and others not. Also, the first time I clicked on the folder there was no Cloud icon next to it, the second time, there was a Cloud icon next to the folder and a message saying "waiting for 9 photos to upload". Also, after the click, the photos where in a different order. Do I/ a user have to be connected to internet to get these photos? I don't want to have to be on the internet to look at photos. I have backup. I just want me or anyone else to put USB flashdrive in computer slot or phone to view or order prints. The problem too is that four of the photos have Cloud icons beside them. How do I get a set of photos that are not in the Cloud.  Does a photo being in the Cloud a

Hi,I have just downloaded the Photoshop Elements 2023. Something went wrong with the installtion and I get the message: Sorry, installation failed. With no error code.When I start the installation, it says that is has found an already existing folder where an old installation resides. And I am not able to select another path where I can install the application. Anybody that has some good advices here?Thank for your help.BrRoger

Hi,I am hoping someone can tell me why Photoshop won't let me open my files as "Camera Raw" files anymore.I was opening and editing all files as camera raw files and then it just stopped letting me opening the files as camera raw files. I now get a prompt "Could not complete your request because the file-format module cannot parse the file."I am hoping someone has a solution to this issue?

Wenn ich unter Datei, Drucken wähle erscheint das Bild zentriert z.B auf A4 und ist mit einem blauen Rahmen umgeben. Lösche ich nun zentriert und gebe z.B. oben 2 cm ein verschwindet das Bild und es ist nur noch zentriert der blaue Rahmen sichtbar. Ich möchte aber um Papier zu sparen nicht ein 10x15 cm Bild mitten in einem A4 Blatt ausdrucken. Auf  meinem alten Laptop mit PSE 10 funktioniert die Verschiebung nach oben proglemlos. Was mache ich falsch?  Trotz grosser Geduld und Freundlichkeit konnte mir der Support nicht weiterhelfen.When I choose File, Print, the image appears centered on e.g. A4 and is surrounded by a blue frame. If I now delete centered and enter e.g. 2 cm at the top, the image disappears and only the centered blue frame is visible. But I don't want to print a 10x15 cm picture in the middle of an A4 sheet to save paper. On my old laptop with PSE 10, shifting up works without a hitch. What am I doing wrong? Despite a lot of patience and friendliness, the sup

I recently got my 2019 iMac working, and upgraded it to Monterey. I bought Photoshop Elements 2022, and Premiere Elements 2022, and downloaded them from Adobe.  Photoshop Elements won’t install. It hangs up saying “Installing (7%)” and “10-12 MINUTES LEFT.” It’s been this way for over an hour. This is the second time I’ve tried installing PE2022, with the exact same results.  After this, I installed Premiere Elements 2022, and the install worked. I’m not familiar with Premiere, but it seems to work. Any thoughts or ideas how to make Photoshop Elements 2022 work with Monterey yet? I’ve read about the problems and hope Adobe will get this fixed sooner rather than later. Maybe this info will help.

Many will start getting an error message now if they try and direct download the installer for their adobe products. Why? I have no idea. I tried myself to reinstall my licensed software, in this case, Photoshop Elements 2022, and kept getting this notice which hasn't occurred before: "installation  cannot continue as the installer file may be damaged. Download the installer again." The usual "guidance being relied on is in fact out of date, inaccurate or just nonsense. The false advice is usually something along the lines of: Make sure all your updates have been done including drivers (you should do that anyways but it wont help).Use a different browser (Edge/Both versions, FireFox, Safari, Chrome).Check your Internet connection, try installing trial software then activate, blah, blah, blah. Make sure you are not trying to install something else at the same time. Generally good advice but the problem is occurring when just trying to in

Using Windows 11, Photoshop Elements 2022, Epson ET-2760, and Epson Surecolor P400.  Everything was working fine until today.  Today when Elements is told to print to the ET-2760 it goes to the P400 instead.  Other applications still print to the ET-2760 fine.

I am trying to delete a lot of my shots and can not find a delete key!  Are photos automatically saved after making edits?  Also, can I rename photos?  As you can tell, I am new to this program!!!  Thank you for your help!!!

I'm having this weird issue again ( it comes and goes) in PSE15. I extract an image, and go to save it but chunks ( squares mostly) are randomly removed from the image, making it unuseable. I tried cloing program, and rebooting laptop.  Then attempted a new extraction- same results. Anyone else have this happen?

I want to use my iPhone to scan multiple photos at a time. I know PSE can separate the photos, but the perspective can be off on the individual photos. I know about the perspective crop tool that lets me fix a photo at a time. Is there anyway to get PSE to fix all the photos at one time? I am not concerned about the perspective of items in a photo, just that the photo itself is square. In other words, I take a photo of four other photos against a black background. Because the camera is fairly close to those photos, they are all skewed a bit, not perfectly rectangular. I can use the crop tool to fix each one, but I'd rather have some way of fixing them all at once. Maybe as part if the process of dividing the photos. Does that make sense? Can PSE do that for me? Thanks for any info. I'm pretty new to PSE.

I am using an iMac 27" 2019 computer and using Element 2023. I downloaded a folder into organizer - the photos show there. However when I edit any one of them they show only as a question mark. Not sure what I did wrong or were supposed to do. Any suggestions? ThanksJon 

Hi. Have just installed Elements 23 onto a new laptop (Win 11 64bit), and when going to any part of the drop down menu, the fonts are huge, with each drop down window taking up a massive portion of the workplace window.How can I reduce the size of the fonts, please??

ich habe bei<link removed>Adobe Photoshop 2022 Windows – CS6 Lifetime gekauftes fehlt mir das deutsche sprachtool der Lizenschlüssel ist im Download integriert aber   ich kann es hier nicht registrieren  ich arbeite schon sehr viele jahre mit CS6 Extended ich habe s auch noch auf meinem alten PC kannes aber leider nicht auf den neuen installieren so musste ich mir es neu kaufen kann mir jemand helfen das das programm auch auf deutsch geht. Ich bin 72 jahre und der englischen sprache nicht kundig Über Hinweise und hilf wäre ich sehr dankbar, Mit freundlichem Gruß Ursel

How can I count the number of colors in a GIF? The Color Table is using all 256 colors, but the image has only about 8 colors in it. I would like to reduce the bit depth, so that the Color Table only contains colors used in the image.

I downloaded Photoshop Elements and I try to Install I get a small screen that I cannot make bigger to see the button to install. As you can see I can,t see the button to go ahead. What do I do   Gerry Langevin  

I am using PSE 2023. I selected a portion of one image, copied it and then pasted it to another image. As expected, a new layer was created onto the second image. I am now trying to resize and otherwise edit the new layer. I thought all I had to do was select the new layer by clicking on the layer I want to edit, and a resize rectangle with handles would show on the combined image. However when I selected the layer I wanted to edit, the only thing that happened was that the selected layer turned blue in the layers panel. However no resizing rectangle appeared; in fact I couldn't see a way to do any editing on the selected layer. I expected this to be simple and even looked in help. This is the procedure it seems to tell me to follow but I must be doing something wrong. Can someone help? ThanksBob

Does Photoshop Elements work with macOS Ventura 13.4?

Can I upgrade from PSE 2018 to PSE 2023 and how much will it cost me?