Premiere Elements

Hello, I am using adobe premiere elements. But the transitions may not be exactly what I want. So I want to add a transition from the outside. But I couldn't find anything about it on the internet. Do I have a chance to add a transition to the program?

Has anyone tried Adobe Photoshop 10 with Win 10?  Results?

Hello,Is there a way to create sub-titles using Adobe Element Premier 13 ? Thanks

こんにちは。映像Codecが安定しなくて、iphoneやipadでは映像が映らない事があります。PCとかだと何も影響が無いのですが、どうもプレミアエレメンツでは些細な事で手持ちのipadでは映像が映らなくなるようです。プレミアプロの方がCodecは選べると聞きましたがそちらの方が確実に失敗は少なくなるのか、ベストな設定方法があれば教えて頂けると助かります。  一応念のため上が映像が出ないもの下が映像が出るものです。

Just installed Premiere Elements 15 and am unable to capture.  I have tried connecting my camera to my computer via my Matrox card with a IEEE 1394 Firewire cable and also to the computer directly using the same cable, getting the same error message.  My camera is a Canon XL1s.  Any thoughts on what I should do differently?Thanks much!

Hi all,This is my first time posting so i'll try to do my best at explaining. I recently went to Indonesia and used my iPhone, a GoPro, and a Mavic Pro drone to capture some great footage of my trip. I recently bought Premiere Elements to help me organize and create a video of the trip. I have everything put togther on a timeline the way I would like it but realized after rendering that my HD drone footage looks very poor quailty. The drone footage itself is good quailty on its own but seems to demish when put into my timeline. I have tried to change the video rendering settings to export with no noticable change in quaility. I read a couple other forums and looked online trying to apply suggestions to mine with no luck. My iPhone photos and videos seem fine and my GoPro footage seems great. This drone footage quailty is basically the last thing I would like to complete my project. I am using a Windows 10 laptop and my drone is a Mavic Pro. Any help would be greatly appr

The first clip for my video is raw video to which I applied an effect (Vignetting).  I then added snapshots following the raw video, and for some reason they appear with the Vignetting effect also.  When I try to remove this effect from the snapshots (selecting each clip and then selecting the effect edit), the effect does not show up in my list of effects, so I cannot delete it.  HELP!

Having problems editing .MOV files from Nikon Z7, ie can hardly see them in timeline, they don't seem to load properly altough they are visible in workspace - any similar experience anyone?  

Hallo...Ich habe mir Premiere Elements gekauft, kann das Programm aber nicht starten. Es kommt folgende Fehlermeldung:Zum Starten der Testversion ist Adobe Application Manager erforderlich. Die Anwendung fehlt jedoch oder ist beschädigt. Laden sie eine neue Kopie von Adobe Apllication Manager unter http://www.adobe.com/go/applicationmanager_de herunter.Ich habe die Creative Cloud in der aktuellsten Version installiert und diese Maßnahme bringt nichts.Gibt es sonst eine Möglichkeit das Programm als Vollversion zu starten?Michael

Hi,I get the preview window in premiere elements not working in "real" speed and because of that withoud sound. I tried a lot ... shuttle speed, project settings, rendering. I would like to see the preview with sound in real speed. (After creating a file the output file is fine, only the preview is "out of order".) How can I reset the settings or get this handled?(Sorry for my bad English)ThxAvusdiagonalis

Can anyone help me with this one?  I would like to lock text overlay to a videoclip so that if I have to insert another videoclip inbetween clips in the time line the other clips and text overlays will stay aligned. Thanks for your help.   [To find a forum for your program please start at https://community.adobe.com/][Moving from generic Start/Help forum to the specific Program forum... Mod]

On Premiere Elements 2020, the in/out markers are no appearing on the preview window.  I can right click the clip and from there I can go to "set clip marker" but it's an extra step.  Anyone know how to get the markers to appear on the preview window?

Why on my project do I now get for each picture a frame in red & black saying 'Media offline'?Thanks

Hi all,Today I received my much awaited new Adobe software, as above.............Within the package is 'Elements Auto Creations 2020' which has almost immediatly, become an annoyance.I've loaded into Premier Elements 2 videos which I have edited, and this was my main reason for purchasing this software package.On each occasion I then wanted to delete the orinal file whilst keeping the new version, all quite normal in my mind.However, Auto Creations refuses to allow me to delete the original file which it say's is: 'Open in Elements Auto Creations 2020' and it is NOT.....................ArghhhhhThe first time this happened I rebooted the computer and got over the issue, but the second time it happened something must be wrong, as this cannot be the way the software is intended to be used.Has anyone else had this issue, is it a settings issue or a program issue?Comments and suggestions would be very welcome to help overcome, this appart fault.Best R'sPeter 

Hello, What is the best video format output to export for YouTube high quality videos? I record my videos on IPhone XR with the highest quality selected in settings (4K). Then I enhance it through the sound auto gain and video exposure in PE. I also add sound and visual effects. Sometimes, when I export to a 4K video, it works well. Sometimes, it crashes (black screen, mixed frames).Thanks!

30日の夕方に購入したのですが、今現在、何度ダウロードをし直しても、体験版が消えてくれません。ヘルプを参照していますが、サブスクリプションが有効であるかを確認する、という初めのところで、プランのところが出てくる画面が違います。支払が表示されません。支払が完了していないということなのでしょうか?どうしたら良いのでしょう、教えてください。

I recently posted a question on this forum and then made the mistake of posting it another way when I didn't receive an answer. I have since been able to complete my project, I was using PE 12 and always had been able to complete DVD discs using my old Dell Computer and was able to play them back both on my computer and my DVD player. I have since purchased a new HP computer since my Dell was becoming very sluggish, I was able to complete my DVD project on my new computer using PE 12 and could burn a disc but it would not play back on my Sony DVD player. Steve suggested that I try a play back on another DVD player but with this corona virus I was unable to do that. It was also suggested to update my drivers on my Sony player but that was not possible, it is too old.  I resorted to opening up my completed project with my old Dell Computer and was able to burn it successfully and play it back on both my computer and my Sony DVD player. All of that said I have been trying to trouble

Premiere Elements2019をHDDからSSDに換装して処理速度を上げたいのですが、シリアル番号が見つかりません。再インストール以外でドライブを移動する方法を知りたいのですが。有ればお教え願いたい。よろしくお願いします。

Hi, when I export my video project timeline as AVI-DV (NTSC) the audio is in mono even though I have selected the stereo option (Adobe Premiere Elements 2020). Is there a way to export the audio in stereo ? The source audio track to the video is in stereo. Thanks.

I am re-posting my original problem with both Photoshop Elements 2018, and Premiere Elements 2018 as I have not heard back any feedback from my original post!  It may have been marked “Answered” by mistake.  Here is the original post and answers to this point: So I have extensively organized photos and videos using these programs, and also created several slide shows.  These videos used to playback just fine on my Asus laptop with the fastest Intel processor available in 2017, plust a Nvidea GEforce 950m graphics processor with 4gb of videoRAM.  Also 16gb ddr RAM.  Now, nothing but freezes and crashes with no video playback, or slideshow previews or playback!  I have already checked and changed the settings that should have cured this problem, and Adobe Tech support went on my PC for 3 hours trying to fix this, to no avail!  Other programs including VLC media player, and Pinnacle Studio playback and edit videos just fine, but this program will not wor

I have several mp4 clips I've uploaded to Adobe Premiere Elements 15 and most of them work perfectly fine but some of them do not play the video! Please help

I am using PE19 on a Windows computer. I have created a 1hr long video and cannot export it. I've tried burning it to a DVD which did not work so I've tried creating an ISO file which it says it does but the folder is empty. I am saving the ISO file to an empty folder on my C drive. I have also disabled the hardware acceleration and changed the main menu in attempts to export an ISO file but neither of those changes have worked. Any other ideas to try to get the movie exported and onto a DVD would be appreciated.

Hello Community, I am new to Premiere Elements, having only used iMovie in the past.  I am working on a project with 5 movie tracks, and when I import the last 2 files, the audio track has a 5.1 noted in the numbered audio track section and I cannot see any audio waveforms to work with to help line up and balance.I created a new project and re-imported the files, thinking I may have inadvertantly changed some global setting, but the same 2 files show the 5.1 notation on the audio track while the other 3 files and music background show up as before with their waveforms.I am at a loss for what is happening and would greatly appreciate some wisdom from those of you with more experience!!! Thanks in advance,Ed

Hi All, I have Adobe Premiere Elements 2019 on a Windows 10 64 bit desktop.  Every time I try to burn a project onto DVD, it says no burners detected.  I check device manager and my DVD drives are there.  I have reformatted the computer a couple of times thinking it might be virus related or some update error - still cannot get it to work.  Would anyone know what to do to get Premiere Elements 2019 to recognize my DVD Burner ? Any assistance would be greatly appreciated.  Thanks.

In tools, in expert view, I do not see movie menu.  I am using PE 2020.  Any idea why?