Questions

Hello, We work in a company where we share projects through a server, so it is essential for us to have the same software version installed on all computers. We have standardized on the 2023 version of After Effects to ensure compatibility with the plugins we use. Until recently, we were able to download the latest update of the 2023 version (likely 23.6.7) through Creative Cloud. However, since the release of version 25, all download links for the 23.x versions have disappeared. This has put us in a challenging position, as we recently purchased new computers and now cannot install the necessary version. We specifically need the final, most stable release of the 2023 version, where many bugs were fixed. Is there any way to obtain version 23 for After Effects, Premiere Pro, and Media Encoder, so that these three applications can run in the same version? Thank you very much for your help.

i want to make a mogrts template for logo animation, i hope it can be toggled with audio on and off with the "checkbox control". anyone please tell me what the correct expression it should be?  the first line shoud be correct, but the second line   if (y==1)100; else 0;   how to make right?  thank you in advance, really appricate!

Hello. I just started using adobe suite and it was working great until a few days ago when I decided to move my Dropbox location to the external drive. Since then I keep getting a message saying "The Common Extensibility Platform (CEP) suite couldn't be loaded." This happens only to after effects and encoder. I uninstalled the app and reinstalled, tried a different account, and gave "read and write" access to all the adobe apps. It's still not working, and I need a solution. Could someone help me please?

Я не могу переместить (позиционировать) нулевой объект, с которым связана камера, и когда я изменяю координаты положения, оси x, y, z в моей композиции не меняются, они как будто отображаются в статическом виде.как сделать так, чтобы нулевой объект лежал на композиции, как на третьем изображении, а не просто оставался квадратом на композиции?

I downloaded After effects from Adobe and when I only have a couple picture layers, and barely any animation, the playback shows the green bar for about 7 seconds and it only plays until the end of the green bar, it doesn't keep pre composing or caching. If the composition is 3 minutes, it'll only play 7 seconds and make it green from where you hit play then stop at the end. Unless I move the cursor and hit play it'll play 7 seconds from that point and stop. I've called adobe and they told me to delete and reset my preferences and rename the folder, I've cleared my cache, I've udjusted playback to 1/4. I have 64GB DDR2 Ram with a 32 core threadripper cpu and rtx 2080ti gpu. I used to be able to do more complex things with after effects on my old Mac with only 8gb and an i7. Any reason when I hit play it only plays for about 7 seconds where the green bar is on the timeline? 

Hi, hat jemand eine Idee, warum beim rendern über den Media Encoder, immer dieser Spiegelbalken rechts eingefügt wird?Das bearbeitete Projekt kommt aus AE und wird an den ME übergeben.Rendert man über AE direkt, wird der Balken nicht angezeigt.

Hi,When I try to open Color theme extention libraries in After Effects, the extention tab looks empty and I can't find the "Color Theme" libraries that I created. I can see it in the recent activity in the cloud, but it won't recognized in AE for some reason.Someone knows what can be the issue? Thanks!

I am trying to create an animation with a stylised offset stroke on top of the main colour. I have attached an image for example. I want the outline to have the same animation as the original shape. So i have  duplicated and precomped the original layers to retain the animation (as the layers have parents and unable to be part of the same layer). When applying a stroke to this, nothing appears in the main comp as inside the precomp has no Fills as this part will need to be transparent to show the BG and the original coloured layer slightly offset.How do I go about applying a stroke to a precomped group of layers that have no Fill.Hope this makes sense. Happy to clarify.P.S Eevery asset in the animation has this stylised effect so looking for an easyily duplicated process.  Thanks !- After Effects 24.6.3- Mac

Hey Community,I'm a beginner in After Effects and eed your help for an Project.Finally I would like create an animated line that show the track in a Map like (https://www.youtube.com/watch?v=5ile4NRMLDQ) [start at 1:00:00]. I know how I create the map and 3d Camera withe google Earth studio and let a line follw an kml path. My current problem is that I want to animate a line (a helix rotates around a center core stroke). I'm shure that this is possible in After Effects (please correct me when I'm wrong) but I don't know how.I need a3d path that rotats around a line. As effect I want to use the Saber plugin I hope you can help me. ThanksBjörn  

I know there's already some post about ACES workflow but I can't seem to find a post that fits my scenario. This is a 2 part question: 1. I'm working on a project and recieved some footage (.exr) in ACEScg color space. I'd like to take a frame into photoshop and use some generative fill to create a clean plate, but Photoshop doesn't seem to like 32 bpc. Is there a workaround for this without changing the color space/ bits? 2. I need help with color management in general. The client is asking to review the clips in a ACES sRGB - Texture color space. I'm not sure how to do this with the OCIO plugin. I'm pretty sure I will have no problem for the final delivery of keeping ACEScg color space, but not sure about the review. Hopefully that makes sense!

I'm having trouble with my project in After Effects. The preview of my video, "MS dag video," is completely black when I open the project. I can hear the audio when I play it, but there's no visual. I'm pretty new to After Effects, so I’m not sure if this is a common beginner mistake or something more complex. Here’s what I’ve tried so far, but nothing has worked:Updated WindowsUpdated my graphics driversUpdated After Effects SpecsAfter effects V25.01Windows 11  Does anyone have any other ideas on what could be causing this? Could it be a settings issue or something with my project file?  

I've just put a fresh install of Sonoma on my 2013 Mac Pro 6,1 which previously had Monterey installed and creative cloud will no longer let me install After Effects version 23.x - it says that After Effects is not compatible with my computer.After Effects version 23.x worked perfectly on this mac prior to me doing the clean install (although I understand later versions 24.x + are no longer compatible with this hardware).Is there a way of installing the 2023 version or is it a compatability issue between After Effects, Sonoma and the mac 6,1?

For exmaple here I'm using the Heebo semi bold font:

Hello, I recently upgraded my AfterEffects from a really old version, and some of the code that I had previously used in a lot of templates and projects is now no longer working. After some troubleshooting, I found that I can make it work if I switch my project to use Legacy ExtendScript instead of JavaScript. Is anyone able to help me translate my code so that I can use it in a JavaScript project? (I don't even remember where the original code for this came from, I just found it somewhere on an old internet forum.) var L = thisLayer; var easing = 5 + thisComp.layer("Controller").effect("Easing")(1); // Slider determines easing amount, 1 is linear var val = value; if (numKeys > 0){ n = nearestKey(time).index; if (time < key(n).time) n--; if (n > 0 && n < numKeys){ val = easeValues(key(n).time,key(n+1).time,key(n).value,key(n+1).value,easing); } } val function easeValues(startT, endT, startV, endV, ease) { var dur = endT - startT normalizedEasi

Is there a way to print out variable values into the VS Code's variable section or print it to the console? The variable section is always empty and the watch section is always returning 'not available' massage for variables when running a script.

Good day everyone! Since the update to AfterEffects v23.4.0 every time I try to use Videocopilot's Optical Flares or every time I open a existing project, that uses Optical Flares, After Effects crashes. When re-starting AE it recommends to disable Optical Flares.  I talked to some colleagues, to see if it's a problem of my setup, but all of them face the same problem! (We're all working on Windows, if that matters) Is Optical Flares still supported? Is there a way to work with Optical Flares in the recent AE Version? We really use that plugin a lot and it always worked well for us. And we need to work with existing projects using Optical Flares, so we really need to find a solution for the future, other than installing and working with older AE versions... Can you provide any tips /help for that? Wondering, that there's not more people, reporting that same issue? I think this is a known problem at your side, right?

 My After Effect CC2020 exported MOV file with wrong encoded date.What problem is with my AfterEffect and how to solve it?

Ciao a tutti,nell'ultima settimana mi si è presentato un problema sia con After Effect che con Premiere. Entrambi i programmi funzionano perfettamente, ma il pannello dedito alla riproduzione video non mi da segni di vita. Di conseguenza mi è impossibile riprodurre il risultato del video o dell'animazione creata, sebbene la visualizzazione dei livelli sia attiva. Ho provato a vedere se poteva essere un problema di scheda grafica, ma risulta intatta e lavora bene con gli altri programmi. Sia After Effect che Premiere in passato li ho già usati e sto riscontrando problemi solo in questi ultimi giorni. Anche disinstallando i programmi (tramite Adobe Creative Cloud Cleaner Tool) e reintallandoli, sia versioni vecchie che nuove, il problema mi si ripresenta. 

I'm just trying out After Effects to see if I can generate an animated title for a Youtube video. I created a simple project with some photos that appear in a staggered fashion. Then I chose: File->Export-> Add to Render Queue. I have not set any preferences so I have whatever is the default. Also, I just downloaded AE from Adobe today so it is up-to-date. I see my project in the Render Queue (Window->Render Queue). But it hasn't started rendering and it's been there for a few hours. I've tried unqueuing it, requeuing it, restarting AE. AE is not using any CPU and and just sits idly doing nothing. I read online that sometimes you have to "restart the rendering queue" but I can't find any instructions for that.  I'm on Windows 11. Do you need to know anything else? I've attached a screenshot of the Render Queue. On the theory that my settings for the rendering where too big of an ask, I reduced them to Quality=Draft and Resolution=Half but that hasn't h

Hi, I have this (and multiple other) weird errors in all of my projects since i installed a new CPU and RAM.  It happends while exporting and also while working in the project.  I already:- Updated the latest studio driver.- Did a clean install of the drivers.- Did a manual install of the driver.- Did a fresh project with no third party plugins.- Exported without multi frame.- Tried a new windows.  

Just need to do some housekeeping, and the list of previously rendered files is growing..There should be a simple checkbox next to each rendered file, and hit 'delete', but alas.. Any ideas/tricks on how to remove these files?

Hi, it's been a few days that I am trying to learn how to work with Rubber hose script and I faced a crippling problem.  so, everytime I create a Hose, the controller ancher points appear far from the shape and this is causing many lags in terms of movement and nothing is working correctly. when I am trying to create arm or leg for a character it doesn't work smoothly and sometime doesn't work at all. Here I attached a picture of my comp so you can see how far the controller ancher points are and how can I fix the position of the ancher points.  Any help on this problem would be appreciated. 

Salen puntos blancos en la composición y aplicación after effects. Mi pc en nueva y todo funciona bien solo pasa con After Effects y Premier. Ayuda. 

Greetings, I was able to do copy cmd+C a complex Illustrator path that had cutouts and paste it into After Effects onto an adjustment layer and the AI path was converted to various mask layer in AE which is exactly what I wanted. But I could not figure how to do this same thing by importing the actual AI file. I was able right-click 'Convert Shapes from Vector Layer', but all I get is a shape layer with a Contents drop-down that has a bunch of Groups that have Path and Fills, as shown in the screenshot below. Is there a way to convert these shape groups/paths to mask paths? The copy and paste from AI into AE is super fast, but I'm just curious about how do this from importing an AI, like I was attempting.  Any help is much appreciated!!

Hello! I've been working with a project in After Effects, this project contains files from Illustrator, today I booted the file to continue working and a series of error messages appeared one after the other, consisting of 1.After Effects error: internal verification failure, sorry! (no current context)2.After Effects error: crash in progress. Last logged message was: <47980> <ae.blitpipe> <2> HardwareBlitpipe Engaged3.After Effects can't continue: sorry, After Effects has crashed. For help and support, go to http://www.adobe.com/go/learn_ae_support . If you still can't resolve the issue, please contact technical support (2). (0::42)4.Before quitting, you have one chance to save your project (don't use the same name as the original) Then it proceeds to crash. I tried uninstalling and installing the program again,  but still have the same issue, would appreciate any help to solve this, thank you!