Questions

I am exporting my video which has many scenes in it.  When I go to play it, it do, all the audio in scenes play at the same time.  So it quickly goes from one scene to the next and you can hear the sound from each scene.  What am I doing wrong?

Hello friends, I need some help. I created an application using ActionScript 3.0, and I want to generate an .apk file. However, I’m unable to publish the apk, and I’m getting this error message as shown in the attached image. I believe I followed the same steps I usually do, but this time something went wrong. Why is this happening? 

seen these for exporting pngs and svgs but not a swf.sensing a need for this to be done and well, would be nice to make it a painless task. this is a example of the file i want to do this to. https://archive.org/details/all-tricks-on-stage 

While creating an application for Android or iOS when I click Advanced ActionScript 3.0 section Animate lags for 1 minute. I have 10+ ANEs added. Everytime I change location of an ANE, it freezes 45+ seconds. Why this menu is so slow?To change ANE locations of a project I have to wait like 30 minutes just to change 15 ANE locations. It is slower than Animate 2023 ...

As shown below, the code can only switch to the brush tool, but the thickness cannot be specified. Looking through the API, thickness only applies to the paintBrush tool and cannot set the brush size. Is there a way to implement the function of specifying the size?var fill = fl.getDocumentDOM().getCustomFill("toolbar"); fill.color = "#FF0000"; fill.thickness = 10;//Cannot be specified here, thickness is invalid fl.selectTool("brush"); fl.getDocumentDOM().setCustomFill(fill);

Hello, I am new to Adobe Animate and am trying to teach myself using the Adobe Animate 2023 Classroom in a Book book. I am on the second chapter. When I try to use the group tool I noticed I was able to move one eye of this creature here but when I move the second to the left side of the face it creates a bulge in the eyebrow.  Can anyone tell me why this is and what I am doing wrong? Thank you!  

I encountered a little difficulty, as follows, when I used the camera, the elements that were originally centered on the stage were moved to the outside of the stage.I hope that after using the command to select the element, it can be automatically centered without being affected by the camera.I checked the relevant API. When the camera is not turned on, the command works fine. However, after it is turned on, it cannot be centered. The xy position information of the element is different when the camera is turned on and off.Can you provide some implementation ideas? Or give the relevant code directly, thank you very much!

Hi guys, well Google has changed a lot of things and its been hard submit apps/games for them.First they changed the kind of file, now just .AAB would be accepted. Android App Bundle.As I saw now, its not mandatory anymore. now you can send .APK or .AABbut the problem now its about Certificate and Signed Key. in past its just create a .P12 certificate and upload your app. but if you lost yout certificate you are screwd!Now its a positive thing, cuz the Certificated and Signed Key are generated and hosted by Google. but I have no Idea how to make it! =/Anyone knows how to get this certificate or google signed key and then donwload the .p12 from it. generate the .APK or .AAB and upload?tnx!

i want to make my keyframe longer, and so i press control and drag it extending it longer.... BUT IT DOESNT MAKE WHAT  PLACED IN MY KEYFRAME LONGER. As in  i have a character that i want his eyes shut for one second.. so i place a key frame and with the frame picker change his eyes to be shut then extend it with control/drag to one second long.... but his eyes are not shut for one second... its just shut for as long as the keyframe was before i extended it. BOTH ADOBE CHAT AND ADOBE CALL SUPPORT TOLD ME TO GO HERE and post it in the forum.- THANK YOU

A shot in the dark - MacOS, Animate CC 2024, latest, 2021 Intel Macbook Pro with 32 GB RAM. I click the colour picker on my toolbar, bring up the colour swatches, and then click the field above it with the colour hexcode. As soon as I click on it (to copy, or type a new colour value), Animate pauses, then crashes. Same goes if I use the Color Panel or the Gradient Panel, wherever I go to type in a colour value. It's as if Animate can't handle me typing in colour values. Not sure what's happening. This is a fresh install with reset preferences. I've also set Accessibility Options in MacOS system settings, to no avail. This is very repeatable, as every time I click that little #FFFFFF to manually give a colour value, it crashes Animate.  

Hello, I make graphic compnonats clickable for a web application. I start by creating amovie clip and then adding two layers (p_xx and v_xx). V_xx is then made into an button and in layer 2 i ad trhe script. is there a possibility to copy all the steps i do for one graphic to another without copying the graphic?

To verify whether this is a software issue or something else, I'm using the following:alert("Note:\n\nThe following text will not be displayed"); // Correctalert("Note：\n\nThe following text will not be displayed"); // Error The difference between the two code snippets is the punctuation. The incorrect one uses the Chinese colon "：" (colon), while the English punctuation "":", appears correctly.Although I suspect it's a language issue, the same code displays correctly on Windows but not on a Mac due to language issues. I'm using version 24.0.8 and the Chinese input method, but I still encounter errors with the \n or\r line break on a Mac.I'm not sure if this is a bug or if there's another reason. Does anyone know?

Hii,I created a basic character with line tools then I made it a symbol for later use. but when I break apart the  character in the main stage so that I can animate it with audio, the line width becoming smaller. Please help me what to do as im new to animation. I want to animate the character with audio, also if im animating inside the symbol, then the line will size will remain same but the audio will not export. please tell me what to do, how should I animate with audio/ line tool, what is the right process to do.

Millions of .fla files from the Flash era are sitting on hard drives, and Animate CC often can’t open them. Especially CS3/CS4/CS5 projects. Adobe could make money by adding:Better backward compatibility for older .fla filesA batch convert tool so we can update whole folders at once Many of us would subscribe to Animate just to rescue and republish our old work. Modern browsers can now safely run legacy SWF content without plugins, which shows there’s interest in bringing this material back. This is the perfect time for Adobe to make Animate the go-to tool for unlocking and reviving old projects. Adobe could make a fortune if Animate just opened old Flash files. I’d subscribe tomorrow just to rescue my projects.

일러스트도 포토샵도 컨트롤+스페이스바+드래그로 확대 축소 조절했는데애니메이트에도 똑같이 단축키 설정할 수 있을까요? 지금 컨트롤+스페이스바+마우스 스크롤로 확대 축소 조절하고 있는데펜으로 그림을 그리다가 마우스로 조절하니 너무 불편합니다 일러스트도 포토샵도 컨트롤+스페이스바+드래그로 확대 축소가 가능하니애니메이트에서도 가능할 것 같은데컨트롤과 스페이스바는 단축키 설정에서는 설정 안되더라고요,,, 설정하는 방법 아시는 분 알려주세요ㅠㅠㅠㅠㅠㅠㅠ

Trying to animate a loop of a moving pattern that gradually speeds up, it has one from at the start and 2 frames at the end, ! being the end position and 1 being the restart position. But as I applied an ease that does that, it seemed to add a minor gap between the two frames together where the pattern moves in reverse in a few frames, how do I make in instant instead while speeding up? 

Hi sorry if this question has been asked before but when i wanted to do a new project in flash cs6 i drew a line and it just went green and i thought i had the colour on my pencil tool green so i made it black, drew the line again and it did the same thing again so i used the paint brush to see if it did the same thing and it did heres a picture to better explan my self if you can see it the screen is ment to be grey but that isnt working either can any one help? 

I can hear it if I test the movie and I can hear it by testing in its sound properties but I can't hear anything when I'm scrubbing or playing from the timeline. It's an ActionScript 3, latest Animate version (24.0,10), The sync is set to "stream", the "Mute Sounds" option in the Control dropdown is disabled. I have no Idea what's going on and I have been driving myself crazy for the last 2 hours at this point, I'm stuck, please help. 

Hello, I have a big problem, when exporting a file video, after the encoder had done his djob, while opening the new mp4 file, i have no sound at all. I'm on the trial version, is it because of that? 

Hello,I regularly create characters using animate from audio on the creative cloud, however this morning I keep getting the error that 'we are unable to contact our service - internal error. I have restarted my computer and cleared cache and cookies and it's still not working. Please can this be sorted asap. I need this for my work.

HELP!!! Animate does not give me the option to select font styles within a font family. The dropdown is not even active. It defaults to the first font in the selected font family. How can I fix this? This goes for installed and adobe activated fonts. 

Hello everyone!I'm having an annoing issue. I can't change the font weigth. It appears blocked. I made a lot of things: reinstall Animate, come back to default settings... etc and I still can't.I'm working actively in Animate and I am having to create texts in Illustrator and copy-paste them in Animate, but I have to do it everytime I have to make a minimum change.Please help!!! 

First off, I've been an Animate user since Flash 3 1999. I've been on the prerelease and the product has shipped with many of my own personal example files (start screen). Over a year ago I had to switch to non-Adobe animation software because Animate was simply not supporting the workflow I needed to continue my career.That said, this week I launched Animate to help me with a client project. V24 has a crippling but that caused crashes when picking colors. That bug has existed for years. so I read a post here in this community to down-grade to V23. So I did. And now, File > New doesn't work. Create New doesn't work either. I have restarted the entire M1 MBP and still, File > New simply won't work. I'll add that Animate feels incredibly sluggish compared to what I've grown accustomed to this past year and I honestly can't believe how unstable and unusable Animate is. I simply didn't realize it until after spending a year with a non-Adobe product. Sorry but how on Earth d

For those who do not know, Adobe Animate Layer Depth feature is awesome for animation.The ability to move layers up and down the stacking order as part of an animation is great.Eg: Put an arm in front or behind the character as they gradually turn.Unfortunately it only appears to work on the root timeline which is very short sighted to say the least and not at all useful. Probably due to a technical constraint hopefully ?When inside a symbol the Layer Depth panel is active but none of the layers can be moved up or down the layer stack? The individual layers in the symbol are visible they are just not working. This is where it makes the most sense to be functional when animating cleanly inside a symbol.So to make my long-winded point.... when will this be enabled fully within a nested symbol?

Whenever I import audio, I do see the waveform of the audio but the program thinks that there's absolutely nothing playing which is a massive problem. I've already tried using different audio formats and changing the sound settings on the timeline so that it's sync is stream-based but nothing changes whatsoever. The strangest thing to come from this issue is that going to the properties to test the audio makes it play as if nothings wrong which confuses me as the program does acknowledge the audio's existence but refuses to play it outside of tests. I've exhausted all of the options from searching up the problem as they only contain the solutions I've already tried and I'm not sure what's the next step to take as I don't want to animate without having audio to help guide me to make the movements sync the best I can.