Questions

I have a problem you guys may or may not be able to help with.I bought a 2024 Mustang that had the B&O sound system in it and while it sounded okay it did not sound as good as the aftermarket system I had in my Lincoln LS.As a result, I had the system replaced with new amps and speakers and went top of the line. I am a 66 year old Doctor so it isn’t necessary for me to say how much the upgrade cost but it was all Focal Speakers and top of the line amplifiers. Here is the problem.I bought the Mustang before I sold the LS and there was no comparison between the LS system and the Mustang Factory B&O system.Before I sold my LS I put one of the Service people at the Dealership into each car playing the same song and asked why the LS sounded so much better than the Mustang B&O system. He told me Ford deliberately had the Mustang stereo roll off the Bass because they didn’t want to be replacing speakers under warranty constantly with people blowing them out playing Rap M

Hello, thank you in advance for reading this. I am new to using Adobe Audition for recording voiceover. I recorded two sessions using the waveform editor and they sound great. My third session I recorded in the multitrack editor as I wanted to test the function of listening to playback while recording (although I didn't end up using it), and as far as I can remember the audio sounded equally great as my other recordings when I played it back. Now as I'm sitting down to edit the files, the recording sounds quiet, hollow, and tinny -- of a different quality than the other audios that I recorded. The only thing that I did differently was record in multitrack as opposed to waveform so I imagine that is the source of the problem. Everything else was the same (studio recording setup, microphone, mic technique, etc.). (It's not just a playback issue either, as I've exported the audio in wav and mp3, and when played in other software the sound is equally poor. I have raw files f

I am trying to figure out how I can change the media & disk cache settings for all users on Mac to the same folder where they can all access the same session template. The problem I am facing is that the media & disk cache settings for each users are defaulting to their individual adobe document instead of a share network adobe folder. How do I change the media & disk cache settings for all Mac users to default to a shared folder instead of their individual documents?

Hello, Sorry if this is a repost, but I couldn't find ANYTHING. I cannot get Audition to simply record my audio- not even from built-in input. I've made sure my sample rate is the same throughout, I made sure everything is connected, and I made sure the computer itself recognized the audio. Any idea on why I can't even get the meter input signal to show anything? Thanks, Nick

Hello there.I was wondering if someone could help me.I am recording an audiobook and i was editing after recording a 30 min chapter. at around the 6 min mark the audio completely changes and sounds electronic and corupted, like theres a second buzzy voice under the main one as well as a bunch of clicks and this persists for the rest of the recording. I have no idea why this is happening, the recording is fine before the 6 min mark and nothing was changed in the hardware or software settings.I also definately did not move any plugs and the issue is still there when I export it into a wav file.Many thanks.

All of sudden I cannot zoom in or out on the either the multitrack or waveform timelines.  This is wtih the on screen buttons, keyboard and mouse wheel.  I can't fathom what's wrong here.

Mon ordinateur n'est pas compatible avec les nouvelles versions d'Adobe Audition. Existe-t-il une solution ?

Is it possible to remove a louder voice from a video. I have audio from a crowd but I someone is yelling and drowning out the conversation. Can I remove the louder yell? Or is this just not possible?

For my job I record the audio off of a youtube video into adobe. I usually do this by using the stereo audio input and then recording while playing the video. However, for some reason the audio input stereo is no longer an option. Do you know why it would have dissapeared and how to get it back?

 I am not sure what happened, but adode now has three different segments on it now and with it being like that I am unable to edit things. It does not allow me to view specific parts of the recording. It only lets me listen from the very beginning of the recording. It also will not let me make any changes. I have uploaded a screenshot of what it looks like. I have tried everything that I know to do but can't seem to fix it.  It also is no longer  giving me the option of stereo for the input. Which is what I use to record audio that is playing from my computer from a video. I have been working on trying to fix it since yesterday and cannot figure anything out. Please let me know if you have any suggestions.

I see in Adobe Audition i can import .m4r files... How can I export in .m4r? Under the Format in Export, File,  the Apple Audio Toolkit lists it as a exportable format, but doesn't show the preset to do it. Help! (Adobe Audition CC 2017)

Hi everyone!My first post over here. Usually I find a solution for every issue, but this time I just couldn't.I'm currently working on a surround sound mix and noticed, that while I can use "touch" or "write" to move the sound around in the track panner, I can't play it back correctly. The issue is, that the volume of all speakers (=the grey bars) stays in the final position of the writing process. So if for example I end with the sound on the very left, no sound will come out of the right speakers throughout the whole track.As I said - it looks fine when I write it - the volume increases and decreases as I move around.What am I missing here? Does anybody have an idea?Thank you!

Reformatting my 6 year old PC soon - I still have a copy of Au all the way back from version 2017 until the most recent. I would still like to have the 2019 version after the reformat. Adobe Support came back to me saying they only have access to version 2020 - which i can see via Creative Cloud - Other Versions. Is there any other place I can get this? By any chance do any of you have a copy?Thanks.

I thought there was a way to have an effect open, apply it to the current selection and then have it stay in the effect rack only disabled. Is that only available on multitrack mode? Thanks.

When you export a multi-track, the Export Multitrack Mixdown prompt offers you your choice of export location.However, the default behavior of the Location seems to be to offer the last place you exported to, even if you're working in a new Adobe Audition file.I would love to figure out how to tell this prompt to default to this file's location rather than the last location used. Is such a thing possible?

Hi there!  I am using 3 Blue Yeti microphones, Adobe Audition and ASIO4all. I have this all work and recording as a multitrack, as I can see the sound waves, however I can't hear any playback at all.  I want to set this up in a way where I can monitor and listen to a recordning of three other people, how can I listen in real time while they record on audition? I want to sit with headphones on, hooked to my laptop, listening to them create this recording to monitior it.

Is there not a loop recording option offered on Adobe Audition? This is a basic function that is offered on a barbone DAW like Garageband but I'm having the toughest time trying to get the same fucntion out of Adobe Audition. I have read one thread that says the feature isn't offered. I was wondering I could get clarification for that. Thanks.  "The Loop Recording function in GarageBand allows you to record multiple takes in a continuous loop and choose the best one later. Each time the loop restarts, a new take is recorded without erasing the previous ones. This is especially useful for voiceovers, instruments, or singing when you want to capture multiple versions of a performance."

Can anyone please help I'm recording Multitrack ASIO from the SQ6 mixer. Is there a way to listen to the playback from headphones connected to the laptop, while recording and not playback directly to mixer??  Because I can't access the playback menu when connected to ASIO 

Hola, hace un tiempo bastante largo no he podido usar Audition en su actualizacion 2024 porque el menú donde antiguamente daba a grabar y luego pausar, etc. ya no está. No he tenido tiempo de resolver y VOLVER a apreder a usar otras actualizaciones de programas por lo cual lo dejé así. He solucionado el tema usando la versión 2022 que conozco y en la cual aparece de una en el menú todo como lo conozco y el bendito botón rojo, ahora que tengo algo de tiempo quiero que me ayuden a ver qué pasó ¿a alguien más le pasó que en esa actualizacion perdieron los botenes para grabar?  Gracias 

hello good day, how can I fix robotic voice theme in this of audio it happened due to recording thanks

Hi there, I've been messing with my music's frequency and have been boosting it's higher frequencies for an overall better sound, and it sounds great on the session and does loop as intended. Sadly as soon as i export it there's an abrupt split second of silence at the beginning, preventing it from looping as it normally should before the equalizer was added to it, and i dont know why it's doing this. Does anyone know a way to work around this without taking away the Parametric Equalizer? Cheers.

I was working with a voice recording.. Applied the Podcast Voice Effect stack 75%.. There is always a slider under the effects stack.. Works perfectly.In the same session (so it is not an "update")..I record a second voice over.. Now, suddenly, I don't have a wet/dry mix for the effects stack.. I can't get it back, even resetting the workspace.. Even restarting Audition.. the slider just disappeared.. |After restarting.. ALL my effects-stacks have disappeared..I can still do it by applying 100% and then mixing the original back in 25%.. but.... what???I want my slider back. I want my effects back.

Many times it feels like the older versions of Adobe Audition are more intuitive and easier to work with than the most recent version.  I added screenshots comparing the windows of the two different versions.  I highlighted in red what specifically I'm talking about.  The name of the file is no longer first as in previous versions of Adobe Audition and now the duration is first.  I find it very annoying.  I sometimes have multitracks that have hundreds of different sounds.  I need tons of sounds because I experiment with a lot of sounds.  Whenever I upload a few new sounds I often will have to scroll searching for these new sounds.  I would prefer to have it where the new sounds show ready to use so I can put them on the multitrack rather than having to search hundreds of files for them.  Below you can see the differences between the two versions of Audition.  I think the files should have the name first as you can see in Audition

Ok, Adobe Noob here. I have been using Audacity and was looking for the more robust features of Audition. I am a voice artist who is working on some audiobooks currently. I have a Mac Airbook, running Adobe Audition 2025. I have a Rode NT1 and a AI-1 that I run through a DBX286S into my Mac via a USB to USB C Adaptor. I have completed 3 chapters with no issues. On the fourth chapter, which I actually recorded 1st, at about 8:00 in the recording level drops significantly. I tried clearing the cache, restrting the computer. unplugging the DBX286S and plugging it back in, also tried unplugging and plugging the mic back in. I have looked for any kind of compressors inheirent in the software that might cause the levels to drop in teh middle of recording but can't locate anything. Does anyone have any suggestions? I need to get these projects done.

I want to Import files, work on them, save the project, and work on them later... Not just save as an audio file. This seems really stupid. Can someone please help. And how can I be the only person that can't figure this out. I Googled it and can't find anything. Adobe products suck to learn, there is nowhere to help learn them. Like I'm supposed to be born with this knowledge or something. Also where can I learn Adobe products without having to haphazardly Google random questions continuously?