Questions

Hi, I'm working an old project in Audition CS6 with some complex routing that allows me to render either 2.0 or 5.1 output and I'm seeing a weird signal anomaly that I can't explain. I'm hoping someone here can shed some light. Basically, I built all tracks in the session to OUTPUT (or Send) to a 5.1 buss chain to the ultimate MASTER 5.1 track. To build the 2.0 Mix, I used Sends on each track to a 2.0 signal chain to ultimately, again, the 5.1 MASTER track. (when I bounce the 2.0 mix, I get a 5.1 file with information only in the L/R channels, which I then downcovert to a true Stereo 2-channel file, adding back in the 8.15 dB lost in the conversion from 5.1 to 2.0). Here's my issue: I have a mono clip on a mono track that is OUTPUT to a 5.1 buss chain (which is muted). I have a Send on that same mono track to a stereo track that is ultimately routed to the MASTER 5.1 track. I have that Send panned 100% Left. When I play the clip, the meters from the track, all the busses, and the

Can I use the Adobe Podcast free version for commercial purposes like creating courses on Udemy etc?

É possivel tratar o audio do primeiro video e deixar a qualidade do discurso do locutor o mais proximo possivel a qualidade audio do segundo video? A ideia é sobressair a fala acima dos ruidos externos, da melhor maneira possivel. Muito obrigado!  

Starting a podcast and would like to use two mics with my co host using adobe audition. Created a multitrack to force it to use separate mics but it's just picking up the same mic. How do I use two mics while recording on Adobe audition using windows. Every fix I've seen has been for Mac. 

Anyone know how to fix this audio? It comes to a hard stop at 0db and sounds loud and distorted

I am on a windows 11 computer using Adobe Audition 24.0.3. I was nearing the end of making cuts on a 4 track multitrack project when Adobe gave me a crash report. I without thinking clicked through the report and it closed audition. Upon reopening the project none of my cuts had been saved despite saving the project thousands of times using ctrl s basically resetting the project to completely unworked. I tried opening backups that were labeled as being made minutes before the crash happened and it gave me the same project without any of the work I had done. I am not sure if these are the correct logs but it does list an error. Is there anything I can do to recover this work?  

Hi there,I'm completely new to audio editing. As a matter of fact, I'm a teacher. I started using Audition to edit some audio files needed for my classes. The thing is, I need to slow the audio down to about 85%. I know I can do that with the 'Stretch and Pitch' functionality. The problem I then get is that the audio sounds tinny. I know that's completely normal, as I'm stretching out an mp3 file (which is already not the best file type, but that's all I was given). I dabbled with parametric EQ, normalise, single-band compressor and dereverb. But frankly, I don't know what I'm doing. I do not aim to be an audio engineer (I'm an Industrial Engineer, myself), because I could never do any of this. I can't comprehend what all of you are talking about. To make it short. Is there a way for me to make stretch the audio to 115% (or a playback speed of 85%, without the pitch changing too much) and without it sounding tinny?If so, how exactly should I do that (if you don't mind helping

Hello everyone, first time poster. I am starting to record audio for a YouTube project I want to start, and while I have had others record me, I've never particularly recorded or edited myself before. I'm not really striving to be a perfectionist, but I'd like something that at least sounds decent for my first attempt. For background, I have an Elgato Wave 3 with some some basic plugins for Noise Removal and EQ (though I won't claim to fully understand what I'm doing on the EQ side). I recorded my first voiceover, and the thing that jumped out at me was, at least to me, how harsh my pronounciation of "S" came off as on the recording. Of course I am aware of the existence of the DeEsser, and immediately went to YouTube to try to understand how to troubleshoot and solve the issue. The video that to me had the clearest explanation was this one: https://www.youtube.com/watch?v=hrSVTJmMpbw&t=252s And so I attempted to apply this to my own case and found that...at least to

Team, I have a 7.1 creative sound card.In this sound card i can change 7.1 to 5.1. How to channel map in Adobe Audition for this card for 5.1 mixing?Please see the images.There are 6 ports in the sound card. 3 input port and 3 output ports.Is that possible for giving ouput to 6 ports for each channel in 5.1 in audition? 

I have been adding markers to a recording in Audition. The numbering has to correspond to a numbered pic. So, I've had Audition number them Slide 1, Slide 2, Slide 3... and so on. I had to stop working. So, I closed down the app and shut off my iMac. When I restarted both and wanted to continue adding markers, the silly app restarted numbering at 1. I need these slides numbered in order for adding the slides in Premiere.   I have a disability that makes hand motion problematic. I have about 150 more markers to add. If I have to renumber (rename) each marker as I add it, I'll shoot myself (except I can't pull a trigger...) Perhaps someone can help me figure out how to get the app to begin renumbering at a set number?  If one cannot renumber markers, perhaps this could be a feature in the next version or update?  I'd hate to have to leave my computer on until I finish working on a recording. It would use up so much energy and would not be good for the enviro

Hi allI've just set up my sound studio for voice recording and when I try to record on Adobe Audition it doesn't record.I have an AKG P420 microphone and a Focusrite Scarlett Solo interface. I've checked on Edit/Preferences/Audio Hardware and my interface is recognised.Any ideas what I might be doing wrong.Thanks guys! 

How do you record a conversation between two people when one person is doing both of the voicesI want to make a recording of two separate characters talking to each other. I am doing the voices for both characters. Should I do create a multi-track file for each character, record that character's lines separately and then somehow mix them together? How would I do this? Do you have two separate tracks and somehow put pauses/space between spoken lines and the other character's track would somehow line up time-wise so there is a conversation without the voices overlapping each other? Or should I somehow cut and paste lines from two separate tracks into one final "master" track together? I'm an absolute beginner at this and am having a hard time finding any really comprehensive tutorials, other than a smattering of videos on Youtube. Any advice would be much appreciated.

Hello, I'm using a MacBook Pro with Windows 10. I'm using a condenser microphone, and Adobe Audition detects the mic when connected via USB to a sound card, which is then connected to the Mac. However, after recording, there's persistent snoring in my voice, even after applying adaptive noise reduction. I've attached a sample audio. Are there any plugins or solutions to clean this up? This would greatly help my Bible project, which I've halfway completed in Audition, but the audio doesn't sound good.

Here at the company where I work, we used the 2022 version of Adobe Audition and now we decided to update to the 2023 version. The problem is that the "RX 10 Connect" plugin no longer works with Audition. Before, with the 2022 version of Audition, the RX 10 Connect worked normally. Clicking on "Effects\VST3\Restoration\RX10 Connect" the plugin opens, but when I send the audio to the Izotope RX 10 the following error message appears: "The RX standalone application could not be launched at path C:\Program Files\izotope\RX 10 Audio Editor\win32\izotope RX 10 Audio Editor.exe. Please reinstall RX to ensure that the application exists. Error code: 2" I don't understand how Adobe Audition is looking for the 32 bit (x86) file from the RX, when the Izotope RX10 installed on the computer is 64 bit (x64). I think Audition should look for the 64 bit .exe file. I already tried uninstalling and reinstalling Izotope RX 10, but it didn't work. I also tried uninstalling and reinstalling Adob

My Audition build is 24.0.0.46. I run Windows 10 Home N version 22H2, build 19045.3570.  Processor:  Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz RAM: 32 GB (26 GB available for Adobe apps.).  My system disk is a 1TB SSD (i.e. 893 GB, 545 GB free).  I use Audition for digitalizing vinyl records from a Numark USB turntable into waveform audio files.  (USB Audio CODEC driver version 10.0.19041.1 date: 06.12.2019).  My issue is as follows:  From time to time the recordings are distorted for fractions of a second followed by a somewhat longer fraction of silence (like a "dropout" for as long as 0.3 seconds but usually much shorter), then a very short fration of distortion before everything runs fine again.  These glitches occur perhaps 10 times during a 40 minute recording but there is no regularity as to when the error may occur. It can happen every few seconds or several minutes can pass between each occurrence.Anyone got a clue?&nbs

I have 3 audio recordings I am trying to combine for a podcast but I can't seem to figure out to use the razor tool (it doesn't allow me to select it sometimes) because I have to cut certain sections of one audio and then it doesn't line up so I can trying to time everything correctly by breaking up each recording into smaller ones.

Hi.I've been trying to open a .sesx file but Audition crashes and generates a dump file (dmp), which I can't open (I'm on Macos). Any ideas? Is there any way to try to repair this file?Thank you!

For people familiar with AUPHONIC.When I was still using Audacity for my audio recording and editing, I was also using Auphonic service for the final mastering, given the limitations of Audacity.Since I moved my audio production to Adobe Audition, I no longer need to use Auphonic as Audition gives me the same key mastering features I need - noise reduction, loudness normalisation, hi pass filtering and some EQ. Except for one - at least, I'm not aware where to find it or what existing effects to use to quickly and easily achieve the same effect.Adaptive LevelerIt corrects level differences within one file between speakers, music and speech to achieve a balanced overall loudness.In some podcast interviews with poor signal or connection, the voice of the guest keeps fading out and so there can be a significant difference in the level of their speech which is rising and falling. Not a very pleasant listening experience.I know that various compression tools can help eve

Hi,I am planning to edit 5.1 surround mixing for a short film in Audition.I have a little doubt regarding the volume level.In the volume level , upto -12 is green / between -12 to-3 is yellow and betwenn -3 to 0 is red.What are the better volume level i have to maintain in the 5.1 mixing for each channels?Front left ? Front right ?Rear left ?Rear right ?Centre ?Subwoofer ?     

I have been using AI Enhamcement for my voice recordings and it's amazing.   Filters out all my background noises - a fan, the computer  humming,   other noises and leaves me with a pure voice.    Like it was advertised.    But i have two questions:  [A]     the output has a percentage, and I can use the slider to change.       But what it is a slidler OF exactly?   It is labelled  "90% Strength" as default,  but strength - of what?      Does it have more or less enhancement?   More or less of the extraneous noises are removed?   Is it the loudness of the resulting file?  Something else?   [B]  If i send it the voice channel from my multi-channel recording,   the resulting enhanced recording has elements of the music that i thought had been elliminated by the multi-channel recording.   My recording is be

I have an X32 console which I wish to connect to Audition for multitrack recording as well as hopefully being able to playback songs from Spotify, YouTube or just my PC in general. My X32 has the old firewire card still in it but I'm guessing the steps are still the same.I'd really appreciate a simple explanation on how to achieve this as I'm on vacation in a sense and don't have access to a physical mixer for me to figure things out on myself.So just to clarify: I wish to be able to record a concert for example where each channel is its own track in Audition, as well as play songs from my computer directly into the X32 and then route it wherever I need. I have the X32 edit program installed as well as the X-USB driver, although I'm not sure if the X-UF USB driver, which is for Firewire also which is the type of card I have, would work better.Thanks.

I'm new to Premiere and Audition and loving it although I'm stuck. I'm making a short film with narration. I shot the movie and the voice over was recorded on a separate voice recorder which is mono. I used Audition to extract the sound clips I needed to use in Premiere. I now notice that the sound has two tracks, L & R, but the sound is only on the Left and the Right is 'empty' How do I copy the left channel into the right, so it's the same sound in both?

I attached a video of the issue I'm having... I just purchased the Tube-Tech Cl1B MKII & Classic Channel Plugins. I can't hear any audio when I select the plugins from the VST3 folder but when I select from VST folder I hear audio. The VST3 plugins shows and loads up, just can't hear any audio. 

I have on my Win-10 based laptop, beweset Audition a 25-tracks project and when I play it back, then randomly on some tracks (bass / piano / etc) a light noise appears and the original sound is gone.The playhead moves forwardWhen I replay the part by moving the playhead back, then the sound is thereAudio-specs: in and output are the sameWhen I export, then the noise and lack of track-suond is always on the same place of the exported fileIt's an onboard MIME soundcardDrivers and Audition are up tio dateLaptop is restartedI clicked with my heelsNo other programs are active Can this be caused by the VST plugins that I use?

The timer when I start recording a voice recording doesn't work like its supposed to instead of being like a normal timer that starts at 00:00:000 and goes up as I start recording it just stays frozen and slowly moves up or it dosnent move up at all. how can I fix this?