Questions

In my Mac's Camera Raw Defaults folder, there are a lot of small files with names that start with "Default," followed by a long string of numbers and letters. (See attached screenshot). What are they and is it OK to delete them? Thanks,Russell

I need a version of camera raw to open my files from my Panasonic Lumix TZ95

I`d like to transition from Panasonic gh5 video (10 bit 4:2:2/All-I) to gh5 time lapse video (and of exactly the same composition). The colours and other parameters would need to match for the transition from real time to time lapse not to look odd.Using After Effects I produced a tif sequence from the real time video so that I could then open the tifs in Adobe Camera Raw using Bridge. I then processed the tifs in ACR, and then the raw stills in ACR in exactly the same way.But the two resultant renders are WAY different. I don`t know what I`ve done wrong.Any suggestions as to how I can colour match real time and time lapse, ideally using Adobe Camera Raw, would be really appreciated. Thanks. IanFootnote - it just occurred to me - I used hlg as my picture profile for the video. This presumably is the reason for the difference. But will Standard profile be better? Experimenting now...Footnote two - standard profile even worse due to poorer dynamic range. I guess it`s trial and error &#12

Hey. Please tell me why the camera raw 12, it is not possible to check the Use graphic proce.with a check mark on - use the GPU to display, there is a check mark. Версия Adobe Photoshop: 21.1.3 20200508.r.190 2020/05/08: 73760933ad5 x64Количество запусков: 1Операционная система: Windows 10 64-битВерсия: 10 или больше 10.0.19041.292Архитектура системы: cемейство процессоров AMD: 15, модель: 2, пошаговая обработка: 0 с MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreadingСчетчик физического процессора: 3Счетчик логического процессора: 6Частота процессора: 3500 МГцВстроенная память: 16342 МБСвободная память: 10465 МБПамять, доступная для программы Photoshop: 14950 МБПамять, используемая программой Photoshop: 70 %ACP.local Status:- SDK Version: ^0- Core Sync Status: Неизвестный- Core Sync Running: недоступно- Min Core Sync Required: недоступноACPL Cache Config: недоступноХолст Manta: Отключено.Слои-псевдонимы: Отключено.Палитра модификатора: Включен.Highbeam: Отключено.

I was using camera raw just fine the other day, but now when I make an adjustment on a raw file I get an error message. Unable to save the raw conversion settings. The file coild not be created. Any ideas on what's up with this?

Why it is so slow to crop with the new Adobe camera raw

I've recently upgraded to the newest version of Photoshop and ACR on my iMac (Catalina 10.15.5 - dark mode). When I open an image in Photshop and use the ACR-Filter on it, the contents of the ACR-Popup become unreadable. The background of the window is black and there is no description on the sliders and tools. Has someone encountered the same problem? Does anyone know a solution?

Camera Raw 12.3 is totally. totally, totally, crap. I wish I could go back to the previous version.

My work computer died and I had to purchase a new computer.  I reloaded my CS5 and went back to work and discovered on my new computer in Camera Raw I no longer have the option to lens correct manually  - there are no tabs whatsoever and I have tried updating the program but only get error messages.  What do I do now? 

I had problem with this new version of camera raw; crop was terrible, low performance, Optics correction could not find the camera lens and the user Graphics Processor was also empty no card recognized. Etc etc .after removing the old custom Settings e reinstalling the same version of camera raw, the Graphics Processor is working again.Wonderful performance now.

I like the tool placment on the previous version. The new version hard to use.

Hello, Adobe creative cloud updated Camera Raw new version 12.3 . How can I recover de  previous version, because 12.3 is untidy and difficult to manage. 

I cannot find the Auto Mask checkbox in the new ACR user interface or the Camera Raw Filter in Photoshop. Where is it? Thanks.

What's terrifying is what happened with Ui CameraRaw, not because I pay for Photoshop to make Lightroom !!!!!!!Batch processing, in the previous update improved copying of all settings, which is a great advantage, in the end you can transfer all settings with a preview to all photos.And now, what happened Changing the user interface, killing my processing speed I normally process in a few hours using CR 600-800 photos, now a few bars, looking for scary vertical options, I don't want to waste so much time by clicking extra many times on one photo .Elements arrangement moved to the right, no overlaps (fast efficient)Earlier the tabbed user interface was fast and convenient.The same applies to cropping photos, it was introduced earlier, but everyone could return to classic, fast and efficient settings in PS, but here in CR there is no such possibility.I think it's time to go to the new software, and I have been using Photoshop since version 3.1 - how old is it !!! It's a shame Adobe is fo

PS, would you PLEEEEEAAAASE revert back to the old RAW converter???? Why change when it is working and has been working very well for ages!!

Is there a new manual because camera raw is completely changed? I dont know how to change the size of a picture. And the interface looks bad.

After updating PS to 21.2.0, I was so unhappy with the CR plugin (12.3) that I contacted Tech Support and they gave me a link to revert back to previous plugin.  That has screwed EVERYTHING up.  Now, any RAW / DNG file brings up a strange CR screen with all of the controls missing and it's now obviously all corrupted.  I've tried uninstalling and re-installing PS from CC site and it is still screwed up.  Tech keeps giving me links that are supposed to overwrite the old plugin but I can't get any detailed help.Quite frustrated.

I'm looking to use the DNG SDK to write DNG files from quad bayer RAW image data but I'm not sure if DNG actually supports this bayer pattern. I have found DNG sample files from cameras which use quad bayer sensors but analysing the DNG/TIFF tags they're not correctly reporting a quad bayer pattern. Does anyone know if DNG actually properly supports quad bayer?  

1) Muscle memory has me clicking [Done] or [Cancel] instead of [Open].  Why, why, why did Adobe change the position of the buttons?  It's probably the most idiotic thing any software developer can do. 2) The missing icons in images in the Filmstrip that showed an edit had been done.  I very frequently open up to a dozen variants of images, and only open into PS those that I have edited in ACR.  Now I can't easily see which they are.  Sometimes there is an icon when I hover over an image, but most times not.

So I tried to install the 12.3 Adobe DNG Converter because the Photoshop program is too old to otherwise open my camera RAW files. However when I try to install it I just get an "Error opening file for writing: (directory)" message. Was wondering if this has an easy and apparent fix or otherwise if anyone has a solution for this issue. 

I just updated to the new and "improved" June 2020 ACR.  I have found that I much prefer the previous version, especially the crop tool.  Is there any way to revert to the former workspace?     {Thread title edited by moderator}

I re-installed the previous camera raw after the recent update but now, I cannot 'open with' camera raw as I used to directly from Bridge.  The Camera Raw Preferences is greyed out.  I can open in camera raw from Photoshop but I used to be able to open in camera raw direct from Bridge without even opening Photoshop.  Any ideas anyone?  Thanks

Where/how do I access the masking slider that was just below the sharpening sliders.I used it it All the time to mask out potentially noisy ares  

I installed Camera Raw 12.3. And now all my personal Profiles are gone. I tried do install my *.xmp Files but no Profiles was showed. I only see the standard Profiles. All atempts to import my personal Profiles failed. Error Mesasge: "Profiles and specifications cannot be imported. All elements have already been imported." How can I access my specifications (*.xmp Files)? Please help.  

Dans la nouvelle version version de Camera Raw, où est passée la fonction "Auto" des réglages de base (exposition, contraste, etc.) ?