Questions

Hi, I don't know what I did , I was working with the "radial filter" and the cursor froze as the magnifying glass, different shortcut also stop working like the "y" checking before/after.Can anyone help me?

Photoshop CS6 will not read RAW files from my Olympus OM-D E-M1. Going through the Help files to find an appropriate file to download for CS6, the right hand side of my screen is always  covered by a text box obscuring the information I needed. Please can someone tell me where to find the file I need.ThanksRobert.

Two things I want to get out of the way first:YES I am only selecting a folder and not trying to open it.NO I did not use ViewNX.I wanted to edit NEF files, from my Nikon D5600, using Lightroom Classic CC, so when I tried importing the NEF files, I would get an error that read "Some import operations were not performed." When I googled the problem I read about converting the NEF Files into DNG files. So then I tried using the "Copy as DNG" tool in Lightroom while importing, and received the same error as before. Upon further googling and reading, I read about Adobe DNG Converter v8.8 and downloaded it from Adobe's website. But whenever tried to covert the files, I received an error that reads "The source folder does not contain any supported raw files."The following is a list of the different methods that I tried usingCopying the photos from the SD card, using a card reader, and then trying open the copies in Lightroom.Using the NEF copies on my PC, trying to using the "Copy as DNG" to

After update the workspace is not properly distributed which leads to less space to work with pictureSee example:https://shared-assets.adobe.com/link/cf46a217-c842-422c-4d77-cd8fb57c78e0Thank you for any assistance!Steps done:- Reset preferences PS LR and ACR- Disabled GPU PS and LRIssue on Mac High sierra as well as Windows 10. !

Although the help is still there, when hovering over the OPEN button with the mouse, the button does not switch to OPEN OBJECT when pressing the SHIFT key.MAC OSx High Sierra - MACBook Pro 2017Regards,Michael

So, i have been using this version of bridge/photoshop and the converter without issue.  Indeed i used it yesterday.  However i updated windows 10 today and now when i try to ope a raw file it comes up as lots of horizontal lines.  I also tried on older files which i have used succesfully before.  Help??

Hi. You can only use CC, if your MAc meets the requirements.In my case, it doesn't. I have Photoshop Cs5, a Canon 5d mark 3 and a 10.7. Mac-now the new RAW DNG converter won't work on the old mac and the old converters links don't work either.Any ideas?

I recently purchased the Tokina 11-20 for Nikon mount.  When using it with Adobe Camera Raw I cannot get the lens correction profile to auto load.  The error message is "Unable to locate a matching lens profile automatically".  However, as soon as I select Tokina as the lens make CR auto-recognizes the lens as the 11-20. This is with CC 2017 and CR 9.10.0.739.  I also installed the latest version of CR 10.xx.xx.xx.xx and the behavior is unchanged.  A user on Fred Miranda reported that he sees the exact same behavior with Lightroom.  Any suggestions?

Hello everyone.Is there any chance of seeing relative adjustments in ACR? There is a basic implementation of it in Lightroom CC, and would be a very welcome addition to ACR. Let me explain.For example, I have two RAW images shot with Auto exposure. I adjusted the exposure of the images in ACR to match each other (say, +0.5 and +1), but now I'd like to make both images a bit brighter by the same amount (+0.2). The only way I can do this now is adjust each image separately to maintain their current previously adjusted exposure values. It would be great if I could select two images and add a relative +0.2 amount.The same refers to most other adjustments.Thanks for any reply in advance!

recently updated to camera raw 10.1adobe photoshop 2018 cc and bridge, cannot ope nef (nikon d750) file, photoshop just freezes and i have to force shut down. please help!

When will the sony a7r3 be available in the rawconvertor ?

My Lightroom 6 can't read the XQD raw photos, How can I upgrade?

I have just bought a Sony A7RIII but can't use the adobe APS to work on bridge og lightroom, when do we get an update? the update is now available  on On1 and on Capture one 10.@ !

Can you give some kind of time estimate on when the next Camera Raw update will be released that includes support for the Sony A7rIII?I have contacted support and searched the net and it seems everyone is waiting for this, but there has not been a response from Adobe other than it will come when it comes.This is not helpful for professional photographers that have thousands of images piling up.Our only options at this point is to purchase competitors products that do support this camera like Capture One or manually edited our files to look like a different camera before Lightroom can recognize it...I know you have to receive this from Sony so you can work on this and find it hard to believe that you haven’t and if haven't would hope you are pushing hard to get it and not just waiting.Either way an update of some kind would be nice.  Something like ”we have no estimate as Sony has yet to release what we need to build it”, or will be available soon, by Q1 2018, by 2018, by 2020, som

How do I download ACR 9.8 for installation?

Hi,I need to open raw files from the new Sony Alpha 7R III . These .ARW raw files are not supported in the latest CC Version.Did anyone know when it will be possible ?Regards Frank

Hi All,I work in a photography agency as a desk editor. 3 of us work at a time from 3 different machines editing pictures from an FTP to send them off to another office. To help us with matching our edits together I was trying the figure out if I could make RAW save the XMP's for an edit to just one folder for the three of us.So to be clear, instead of saving our edits to here:D:\Users\dylan\AppData\Roaming\Adobe\CameraRaw\SettingsI'm trying to change the default location to something like:\\192.168.101.215\all transfer foilder\EditsI realise you could just manually change where you are saving the image but I'm trying to set up a workflow where the "Apply Preset" option will populate with edits from all three of us and not just the one machine as speed is an important factor in our job.If anyone would know a solution to this query it would be much appreciated.Thanks,Dylan Flanagan

is this a problem?thanks

I open a RAW or JPG file using PS or Bridge and when making my adjustments in ACR the popup prompts will stay on the screen after the file is opened in PS. In other words there are a bunch of ACR "yellow" prompts in PS which cover the screen after the file has been opened in PS. Closing out PS will clear out the prompts.A screenshot is shown. I am running PS/ACR on a MacPro with Retna although this has been an issue with previous releases of the OS. Thanks, Ted

Have just bought D5600 and tried to download nef pics into cc6. Won't recognise the files. So tried to update cc6 version  [1014445] on windows 10. Get  a message to down a new version of Adobe application manager. Tried doing that and get error 50. Any ideas please ??

Hi there.I'm trying to find out if I'm doing something wrong.And as far as I know, many PS users struggle with understanding profiles and assigning them so maybe this thread will be helpful for others.My monitor profiling and overall color management workflow is this:1. unassign any profile from my displays, then calibrate each monitor - create profiles.2. assign proper profiles for each monitor in Windows Color Management setting.3. In Photoshop go to Edit->Color Settings and for RGB change profile to "Monitor RGB - XXXXXXXX"4. I disable Color Management Policies for RGB images.To test if everyting is fine and that I see all color properly, I create an image with 3 color spots: 100% Red, 100% Green, 100% Blue.I take a 'print screen' of this image and paste it into Photoshop. When I measure these three colors and they are 100% then all's fine - I see what I'm supposed to see..The problem comes with Bridge. Thumbnails show something completelly different. And I understand it's becaus

10 would not work.9.8 did.but it looks in a folder that is no longer there.so i remade to folder and put raw images in it.but it could not find files there.how do i totally remove the software so it does not remember where the files used to be.yes in win 7 i removed the program in the usual way.help!thanks all

Hello, dear developers!Could you please add new keyboard shortcut for "Export settings to XMP" option? It could be "Ctrl + E" or "Ctrl + Shift + E" for instance. Both shortcuts currently are not used.It's oddly, that so frequently used option still has no key shortcut. Personally I use it very often (cause I don't want to lose my edits in the middle of the process) and going to menu every time I want to save settings is a bit annoying as it takes time.

I just updated to Bridge CC 2018 and ACR 10. When processing in ACR I select all and Sync settings and it only corrects the image directly under the one with the corrections not all the images I have selected.  VERY FRUSTRATING!Any suggestions? Quit Bridge and re-started to no avail.Thanks, Sally

Hello everybody,I assume that I am not the only one having the following :Camera Raw cannot load the icc's profile Gray Gamma 2.2 in the workflow (I can choose many differents icc profile but not his one). I have checked this profile is present in where it should be in Library/ColorSync/profiles/Does anyone have an idea ?Many thanks in advance.