Questions

[This post contains formatting and embedded images that don't appear in email. View the post in your Web browser.] I narrowed down the cause: The photo's ICC profile (which defines how to interpret the color numbers in the file, like sRGB or Adobe RGB) is "Apple Wide Color Sharing Profile". I had recently seen LR and Photoshop trip over IOS photos with that profile, and I hadn't seen that profile before, so this time I did some research.   As a workaround, export IOS photos from Photos.app using Color Profile: Display P3 rather than Most Compatible, which will avoid the use of Apple Wide Color Sharing Profile.   GORY DETAILS   Apple devices by default record camera images in the "wide" Display P3 color space and set their ICC profiles to "Display P3". But when Apple software "shares" those photos, it will sometimes convert the image content to be approximately sRGB (the most widely compatible color space but with the smallest gamut of colors) and record additional inform

I raised this on LR Classic forum, trying here as some suggested similar issues have been rsolved here.Windows 10 and LR Lightroom version: 6.14 [ 1149743 ] If I go to a Windows 10 folder - all of the jpeg files with have a thumbnail  (as do png, tiff etc)Very few DNG files will have a thumbnail (usually none)I have installed Microsoft raw image Extension .... v3 no differenceHave followed the steps to kill thumbnail cache, delete it, and restart explorer ... all jpeg thumbnails rebuild (slowly) but not DNG.Have also followed the tip to uncheck 'always shows icons, never thumbnails'T in folder prefernces. I have found an intesreting anomaly ...My phone creates DNG files directly  ..  my camera has to have the raw files converted and I use ADOBE DNG converter to do that.A test showed something I had not realised before.Files saved to Desktop ..... the native DNG has the correct thumbnail, the converted file doesn't, but if I double click on it, a

I have an older version, elements 2020, and it does not process my new canon R6 CR3 files. Is there a version of elements that will do this? Does traditional Photoshop or Lightroom do this? If I need to switch programs, I am willing, but I really just want a streamlined way, like I've gotten used to. I have always enjoyed just purchasing elements and not paying a monthly fee. Anyone have any great suggestions? Thank you in advance!

Bonjour, depuis peu, quand j'envoie une photo de camera raw vers PS, j'ai une grande perte de netteté et de peps. CR 16.1.1 et PS 25.4. Sur la copie ecran jointe : à gauche CR, à droite la même dans PS. On ne voit presque plus les étoiles et elle a perdu en netteté. Je ne trouve pas d'explication.Merci d'avance pour votre aide

I'm looking to evaluate Adobe Camera Raw's demosaicking with other demosaickers on some DNG files. This is being complicated by ACR apparently applying some Color Correction and tone mapping. How do I either disable these altogether or make it apply a known CCM (say one of the two contained in the DNG) and known tone map (say the sRGB tone map or just a gamma correction)?I've already disabled everything else I can see: sharpening, denoising. I've set it to use the Adobe Neutral profile as it seems to apply the gentlest CCM and tone map. Do I need to make a custom profile? I tried doing that but was unable to get the results desired.

Windows 10 Pro, 64bitCamera Raw 9.8Bridge CC 2017 7.0.0.93 x64Photoshop CC 2017.0.1 20161130.r.29Use GPU is checked, with AMD HD7870Experiencing an issue where occasionally when opening multiple files into ACR from Bridge, White Balance tool acts like a zoom tool and does not function properly.   Upon selecting the white balance tool, cursor turns into eyedropper icon as expected.  When clicking, cursor changes to zoom rectangle and zooms in 100%.  Upon mouse release, zoom returns to fit screen.  Can't tell if I'm hitting some weird shortcut or if this is an actual bug?  Either way, it's very frustrating.  I left Bridge open the last time it happened (after hitting cancel in ACR), and when I tried opening the files again in ACR 10 minutes later it was working normally again.  I have no idea how to reproduce this problem.Things I've tried:- Closing and reopening- Resetting preferences when reopening- Restarting computer- Closing/Opening Photoshop

Updated Camera Raw to version 16.2 this morning. Unfortunately my Photoshop crashes every time I use Camera Raw now. Never had any problems with Camera Raw...until now. I use Windows 11. Is it possible to go back to the previous version of Camera Raw?

Is there any way to toggle/hide these bottom elements in ACR? I'm looking for any extra room when working on a laptop and when masking, these areas take up space and I never refer to them. Especially the bottom area with the color space, ppi etc. A big waste of screen real estate for a line of text!

Hi everyone, I've scoured everywhere for an answer and seem to be getting nowhere.  I'm just wondering if anyone knows (in easy to follow steps) how to sync RAW files in Cloud to use on desktop and mobile? I am mainly editing on my laptop but would prefer to edit on my phone when I'm not with my laptop. Does anyone know how to do this? I don't use the classic lightroom and when I try to upload the raw files to adobe cloud- it says file type not supported. Many thanks,K

I'm sure this has been adressed elsewhere already but I could not find any working solution on appropraite discussions so please bear with me. When I open ACR from within PS on a particular layer, do my edits, close ACR and reopen the very same layer in ACR (still from within PS, of course), the edits are still intact but all the sliders have been reset to default (i.e. now way for me to readjust previous settings). Any idea how to fix thius or is this supposed to be standard? Thanks and best Peter

photoshop keeps crashing when using camera raw. how can i delete camera raw from preferences

Hi All, seem to be in a bad run of luck with my set up this week! I'm getting inconsistent colours from ACR, higher saturation than in Bridge previews, photoshop and Lightroom. Bridge, PS and Lightroom all look the same, if there are any differences between those three they are subtle enough that I've not spotted them.Last time I had a similar issue to this it was a monitor calibration issue. I've re-calibrated, set to defaults, removed old profiles, but still encounter this issue.I didn't change anything in PS prior to discovering this, other than GPU performance settings as I've encountered a crash issue there also. Not sure if these are related.  usually, the most obvious difference to spot is on the legs, where the saturation is already very high. hopefully the included screen captures show the issue. I've tried my best to keep the images the same size to avoid any other colour shifts. I typically do all my colour and tone work in ACR so other than moving o

can't find subject selection on the updated camera raw 16.1.1

Bonjour,Quand je traite le fichier raw d'une photo prise avec des ISO élevés, de nuit par exemple, un résultat correct affiché dans Camera raw 16.1 (ou Lightroom) s'avère affreux dès son affichage dans Photoshop 25 ou son enregistrement en JPG ou TIFF. Des artefacts en réseau de lignes courbes aparaissent dans les zones sombres. J'ai testé des fichiers sur 4 ordinateurs différents avec le même mauvais résultat.Le traitement par DPP4 de Canon de ce fichier raw génère un DNG qui, ouvert et traité au final par Camera raw, reste fidèle au passage vers Photoshop.Peut-on expliquer cette distortion ?

Is it possible to cycle through different crop overlays in Camera RAW like it is in Lightroom Classic?  In Lightroom, one can cycle through the rule-of-thirds and other grids, spirals and other crop overlays by pressing the "O" key when using the crop tool.  However, in ACR, the "O" key simply toggles highlighting of clipped pixels on and off.  Is there an equivalent key or key combination in ACR that will give alternatives to the default rule-of-thirds crop overlay?

I am accustomed to editing my RAW files in ACR using whatever is the current version.For a long time I have handled noise reduction using an adaptive ISO preset set asmy Camera Raw default. On the whole, I never have look at noise reduction as this default preset handles noise reduction admirably.When editing is finished, I convert the RAWs to DNG with the original RAW embedded in case it is ever needed. (It has been needed on very rare occasions when the DNG file has failed to open properly for unknown reasons.)With Camera Raw 15.3 it looks like I must apply the AI denoise first, since if applied at a later stage it does not play well with some edits, in particular healing brush edits. This creates a new Enhanced DNG file which is the one to which to apply further edits as required.I note that the original RAW is not embedded in this Enhanced DNG file nor can the AI Denoise be undone.It therefore seems necessary to keep two files rather than one i.e. the DNG with original RAW embedded

Can anyone help me, how to edit camera raw language when adobe does not have a supported language. Like photoshop, there is file TW10428 located in Locate. Can camera raw be edited like photoshop?THANKS

Ao selecionar a ferramenta de edição no Camera raw, o aplicativo para de funcionar!

Hi GuysMy Camera Raw isn't working anymore if I open it via Photoshop or Bridge it causes the Programm to not respont anymore and the only way to close it is via Task manager. Reinstalling Photoshop hasnt worked either, thanks for your help. System Specs:W10 Enterprise Edition10.0.19045 Build 19045HP ZBook Studio 16 G10Intel 19-13900H4070 Laptop Edition

Hellounfortunately when I try to open Camera Raw 2024 from Bridge it doesn't work. I already updated everything and it still doesn't work. I also tried to open Camera Raw from photoshop and it still doesn't work.Does anyone have any clues what I can do ?

Hello, I have been using Camera Raw from Bridge very often, and all in a sudden this message pops up when I launch it and it wont launch. Below in the picture in French, it says "The modifiation with Camera Raw requires that an eligible product be under licence."   I have launched Photoshop, uninstalled photoshop, reinstalled photoshope, reinstalled Camera Raw, reinstalled Bridge. Nothing works. And in Creative Clouds, it says all apps are up to date. Does anyone know how to fix this?Thanks in advance!

I just got a Nikon Z8 it's running the latest firmware.  When I load the  Raw files into Camera Raw, the Exposure is set to -23, Highlights is set to -10 and Shadows is set to +10.  With my D850 these are all set to 0. I notice that some exposures have severe vignetting while others with the same lens opening and distance are fine.  You don't see the vignetting in the rear monitor so I assume these are Camera Raw translation issues. Are other users having this.  Has Adobe said anything?

Not all of us have massively high end video cards, especially on laptops and compact desktops.   I run mostly on an i9-12900 16-core 8 thread CPU with Intel m700 128gb integrated graphics and it takes 6 minutes minimum to perform noise reduction on a RAW file.  No matter how I change the settings.  From what I understand this is an inadequate GPU issue.  So basically almost all the CPU cores are sitting idle during NR.   There should be a way to offload the NR to the CPU or share the load with the CPU.   

I have a Mini (late 2014) w/ 64bit processor and running OS 10.14 Mojave. I'm thinking of installing Elements 15 (which I'm told is compatible with the above.) My Leica camera outputs DNG files which I need to convert to PSD or JPEG for manipulation in Elements 15. Is there an available version of Camera Raw that's compatible with all the above?

Is there a script that can adjust the parameter value in the camera row? For example, I want to find out the current "temperature" value and add 5 to that value.Can I develop it into a cep script? Or should I develop another plug-in?