Questions

I just noticed as of late when I open up a raw file in editor the tint is not 0 but various levels? My camera, nikon d500 does not have a setting to mess with the default tint in camera. So why when I open raw editor, the tint does not start as zero?

I usually use Bridge to edit my photos with Camera Raw. When in Camera Raw I cannot find the colour mixer option. I can find a colour menu which has a white balance selection box and four sliders called Temp, Tint, Vibrance and Saturation. There used to and option called Colour Mixer which has choices called Hue, Luminance and Saturation but This seems to have dissapeared. is the colour mixer still available or has it be removed from Camera raw? I am using Camera Raw version 17.5.0.2318 and Bridge version 15.1.1.729. Is there any way to get the Colour Mixer back or is it just hidden somewhere? Thanks in advance.

Basically I want to perform a post-production zoom in camera raw, like I would on my telephoto lens. For example, I have a full body shot of a horse and I want to zoom in to just the head so that my full frame is the head. I don't want to just crop around the head, I want to magnify it.

Hallo,wenn ich in Camera Raw Version 17.3.1 ein Bild bearbeite, kommt nach einiger Zeit folgende Fehlermeldung:Der Grafikprozessor ist auf einen nicht behebbaren Fehler gestoßen. Aufgrund eines Laufzeitfehlers wurde die GPU-Beschleunigung für den Rest der Sitzung deaktiviert. Windows 11, I9, Grafikkarte RTX 5070  Bitte um Unterstützung

 Hi All, So with the new update for Camer raw 17.5.0.2318 , when I save a predefined set of parametersit doesn't save the proper needed adjustments. Well done Adobe_ thanks for making us pay for a software with constant issues!

ACR 17.5 became very GPU memory hungry. It takes only one Sony's RAW file to open via Bridge, make some basic adjustements, denoise, make a few masks (eg. select subject, select object, brush, create mask by duplicating inverted, etc) and ACR consumes whole 24 GB of RTX 3090 card (system (Win 11) with e-mail client, web browser and Bridge opened consume about 700-900 MB of GPU RAM). Then I close ACR, close Bridge, reopen it, open the same file in ACR (including the masks prepared earlier) and do nothing, watching as VRAM ocupation curve in Task Manager's Performance tab climbs slowly till it reaches the max capacity and the 'Out of GPU ram' tab apears (as shown on the attached screenshot).I'm working on Win11, i7 11700K, 32GB RAM, RTX 3090.I post it as separate bug report as @Aleke told me to do.

Hi all,In one of the previous recent iterations of either PS, Bridge or ACR whenever I hit Done in ACR after completing an edit I was automatically switched back to my open Bridge window. Prior to that version, and in the latest versions too, the default upon hitting Done in ACR had always been to switch me back to the open (empty) PS window, and I had always had to re-open the Bridge window by clicking it in my taskbar. This small thing saved me about a couple of million keystrokes in the brief time the function existed! Can anyone echo my experience, or show me how to establish that behaviour again? I'm afraid I didn't really take notice of in which version or PS, Bridge or ACR that behaviour began - I just offered up a thankful prayer and got on with my work - and I'm in the habit of just installing whatever update comes down the road automatically. I sure did appreciate that small function though, especially when working with a big file-set. Can anyone shed any light on this p

Adobe Camera Raw 17.5 错误批量降噪非常慢，旧版只需要6秒一张批量降噪后写入AI设置会卡住批量格式转换会导致计算机崩溃 降噪后没有dng非常不方便，bug后需要重新进行。 64G+3060TI+i9

In Adobe Camera Raw, with a studio portrait, shot on clean grey background for example, I can easily mask the subject (or background).How can I create a streak of "feathered" light across the background, to go BEHIND the subject?(I know how to do radial and lineal gradients)I'm sure I watched a tutorial earlier this year but can't remember how to.Your help would be appreciated, thanks

Hello all,I'm quite new to the world of Camera Raw and Photoshop, and have looked online for the answer to my question without success.When I open a RAW (.ORF) file in Camera Raw I typically start off with the Auto button, but I often find the suggested Exposure isn't correct (which is easy to fix) but sometimes I find the colours have changed and look a bit too vivid or have a colour cast making the image look unrealistic.  (I'm editing bird photos so I'm looking for something that accurately reflects what I saw with my eyes.)I can see that the Auto button changes the following:Light> Exposure, Contrast, Highlights, Shadows, Whites, BlacksColor> Vibrance, SaturationIs this the complete list, or does the Auto button change anything else behind the scenes?Thanks.

Please update DNG Profile Editor to the latest DNG specifications so that new feature such as HDR profile can be adjusted.

Though it is better than it was, I find the selection tools in camera raw editor have difficulty recognising people with darker skin tones and it's making me a bit miserable.

¡Hola!Ayer actualice todas las aplicaciones de adobe a la última versión incluyendo Camera Raw a la 17.5.0.2318 sobre PC windows. Al editar raws, ya no aplica las correcciones de perfil de lente automáticamente al marcar la casilla. Es más, al intentar seleccionar el perfil a mano, veo que bajo el menú de "Sony", solo aparece la lente "Sony DT 18-200mm".Hasta la actualización funcionaba perfectamente con todas mis lente.  ¿Alguna idea? ¡Saludos y gracias! Iñigo

I can't still use the remove reflection filter.I created a post weeks ago with the latest Adobe raw update and still no results.It is very annoying that no solution has been found for this yet.Info Mac OS. see screenshot. 

Il y a quelque temps, camera raw permettait de corriger le bruit des photos de façon très pratique. On allait dans détails, réduction du bruit et PS proposait l'option correction par l'IA. Je ne retrouve plus cette fonctionnalité. Quelqu'un peut me dire où elle est passée ? Merci

Il y a un bug majeur depuis un moment dans CameraRAW lorsque j'utilise le filtre "floue d'objectif". Au moins une fois sur 2 ou 2 fois sur 4 le programme gèle complétement lorsque je fais des réglages fin. Déjà le curceur de la souris à des saut d'fps avec des lague par moment. Mais c'est surtout le gèle général du programme qui dérange. Plusieurs fois je suis obligé de fermer Photoshop depuis le gésionnaire des tâches parce qu'il ne répond plus. Et je perd le travail déjà effectué. Je suis obligé de faire une première sauvegade du travail avant d'utiliser le "floue d'objectif" dans CameraRAW.  Veuillez améliorer la stabilité du programme et à le rendre plus fluide.  J'ai un processeur Intel I9 9900. 32 Go de ram RTX 3070 ventus de 8Go de VRAM.Photoshop et CameraRAW sont à jours

Presets and snapshots often save with the wrong or outdated settings—even when saved repeatedly—causing changes to be lost or reverted. I'm using Camera Raw 17.5, but this has been a frustrating issue for some time. 

My GPU drivers are up to date. I have Windows 10, Intel i7 and 32GB ram. Denoise of raw files takes several minutes, so is unusable.

Hallo    ich habe ein Problembin noch eher neu hier.   ich habe gelesen das man in camera raw mit der superauflösung ein bild vergrössern kann.   also ich habe ein bild in raw ich öffne es und bin in camera raw gehe auf superauflösung  es kommt der bearbeitungsbalken wo man den fortschritt erkennt. es ist die neue version 17.... wenn ich auf verbessern klicke kommt nur der hinweis wo sich superauflösung befindet aber warum erkenn man keine änderung? alle maße sind gleich im filmstreifen darunter ist kein zweites bild habe alles versucht immer wieder  ich komme nicht weiter warum finde ich es nicht warum wird es nirgends angezeigt usw es muss ja wo sein oder mache ich was falsch? kann ja sein   danke für die hilfe   gerry

After downloading the 2025 Camera Raw version the brush sliders do not default back to zero when choosing a each new brush. The previous settings remain on the new brush and i have to manually zero each slider.Has anyone else had this issue? Thanks in advance.

I've discovered another Adobe garbage dump. On Win11, in my ...User/AppData/Local/Adobe/CameraRaw folder there is now a subfolder called BigTableGroupCache. Mine had 1 gigabyte in over 700 files named "Table..." followed by a long string of meaningless letters. The oldest files had creation dates in October 2024, which is when Camera Raw version 17 was released.   Google says "Bigtable is a distributed, scalable NoSQL database service offered by Google Cloud", but says nothing about Adobe's use of BigTable.   So I closed all things Adobe and deleted everything in BigTableGroupCache. Then I launched Bridge and Photoshop and browsed and processed a few raw files in ACR with no problem. The BigTableGroupCache was repopulated with files for the raw images I processed. Next, with Bridge and Photoshop still loaded, I deleted everything in BigTableGroupCache again. Then opened and reprocessed the same raw files, again with no problem. BigTableGroupCache was again repopulated.  

Camera raw filter not work after the last update on my macbook air 

Hi! Recently updated my Photoshop and Camera Raw. When I went to open it, it says "Camera Raw requires graphics processor acceleration to edit photos". I've been trying to go in to settings and check, but everything looks like it should (to my knowledge). What can I do to make it work, anyone with the same problem?  I have a Macbook Pro with an M1 graphics card. 

my community

After trying to solve this problem for over 2 months including buying a new laptop and asking in these discussion forums (dialogue with @Aleke)  and trying everything in official adobe support documents, this:Earlier today I worked with Adobe support about a problem I was experiencing where Adobe Camera Raw was halting with the error, "The graphics processor has encountered an out-of-memory error." The support person almost immediately implemented a workaround that seems to have resolved the issue, which seemed like a miracle after exhausting all suggestions on your website support documents and in the adobe community forums. Astonishingly, this workaround was to disable my NVidia 4070 graphics card altogether in Device Manager, leaving only my integrated Intel UHD GPU enabled. While I am very grateful to have a workaround that allows me to get back to work right away (she was wonderful), this hardly seems like an acceptable long term solution.  This is a brand new lapto