Questions

Hello!I have an issue that I am trying to figure out.  I have a project where the user has three attempts to pass the quiz that is integrated within the course with a 62%. So I first started by setting the quiz completion criteria. However, we ran into an issue where if the user did pass the right number of questions, ( answered 10 out of the 16) and then closed it out before finishing the course it counted it as completed since they technically got a 62%. So then I added in slide views.  Now I am having an isssue where it is setting it as completed with whatever score they have because they are viewing all the slides.  Any ideas on how I can make this work?? 

Hi, I am using Captivate CC. I am trying to design a drag and drop interaction with the following filters:1. No Submit button2. When user drops a drag item in its correct location, it locks the drop location.3. When user drops a drag item in an incorrect location, it does not lock the drop location.4. For the drag items dropped in incorrect locations, user should be able to redrag them until all of them are in correct locations.5. Once all the drag items are dropped to their correct drop locations, the feedback is shown. How can this be achieved? Anyone please help?

Hey everyone,I have an interaction that I need the button to appear only after the whole audio has been played. I tried looking for an answer and I can't find anything. Any suggestions are greatly appreciated!

Hi,I have 4 tab interactivity with respective audiosI have also introduction audio befor Interactivity startsNow I want to disable Next button till all audios of popup gets completeOnce user listen all audios till end next button will get enable. Could you help out in this.

On a windows PC, CP version 11.5.5.553I do Media > Video > Slide Video > Vimeo insert my link and Captivate just hangs on the "Loading Video" Screen at 50% Please fix ASAP or tell me how to get around this. Videos MUST be hosted on vimeo. I also tried with an interactive video and get the same issue. The vimeo link is valid.

Good day all, Thanks for all earlier support, itssolved our problem. Last challenge.Our END project button takes participant to blank page image with small text"Thank you for exiting the content. You may now navigate awayfrom this content" There should be an LMS system FINISH BUTTON in the LMS system top bar.Is this a Captivate issue or a LMS system issue.How can I solve?? Thanks so much, Shona

Hello, I am facing problem in simple drag and drop. all objects hit area is in square format, so there are no accuracy of object in different shape, please check attached video to better understand.

I'm new to Captivate! Really just subscirbed for the 360 capabilities. I built this tour, however I noticed the buttons I created (info, home, etc.) don't function on certain browsers. It works on Google Chrome, Edge, and Internet Explorer on Windows 10. It does not work in Google Chrome for MacOS.  Any assitance will help!  Link to course (hosted on AWS for now): https://storey.s3.us-east-2.amazonaws.com/content/East+Bethel+Elementary+School/East+Bethel+Elementary+Tour/index.html Here are my publish settings:   

Hi.  I am relatively new to Captivate.  I am on Captivate 2019 11.5.5.553.   I have a few knowledge check questions in my course.  I also have a quiz at the end which gives the user 3 attempts to correctly complete.  If they fail all attempts, it takes them to a slide that says they failed and displays a button to retake the course.  The button has an advanced action that takes them back to slide one and uses javascript to reset the quiz data.  This part works fine.   The problem comes in when they start retaking the course and come to the slide before the first hot spot knowledge check slide.  This slide has a next button set to go to the next slide.   Only, it doesn't advance to the next hot spot knowledge check slide, no matter how many times you click the button.   Through various tests, I have deducted that it is a problem with the hot spot slide.   Has anyone had this problem and successfully bee

Hi,Trying to play and view SCORM compatible files exported from Adobe Captivate 8 and 9 in Success Factors LMS.I get the message - 'ERROR – unable to acquire LMS API, content may not play properly and results may not be recorded. Please contact technical support’ I have tried SCORM versions 1.2 v3 and 2004 V2 and V4.  We can view the content, however it does not track, show as complete etc.We are just in the process of implementing Success Factors and are a bit stumped.... Anyone experienced this problem before? Or know of a fix?Many thanks

Hi there,  My team is looking into purchasing more Captivate licenses. Will multiple staff with licenses be able to work on the same project? For example, is there shared space to store shared projects and have multiple staff edit them? Thanks, Kelly 

When I add a slide to my project, is there a way to add it to the TOC without resetting my TOC? I have an extensive TOC and resetting is quite cumbersome.I am using Captivate 19 on a PC running Windows 10

Hello AllI need to modify the text color used for Quiz Review on the Short Answer question type. I hope someone can help me. 1. The words "correct answer" should be another color. 2. The responses should be another color. Is it possible to modify the text color for Quiz Review?  

Hello. I am having problems with a Captivate file. When I preview the project locally, everything shows up fine. However, after I publish and upload it to my webserver, I experience problems. The problem happens on 3/35 slides. On those three slides, the timeline pauses (I see the Play button change) but the imported audio continues to play. However, none of the objects later on the timeline show up. The issue happens on only those three slides, despite other slides having the same components. I can manually click play again and the objects eventually appear, but always out of sync with the narration. I've tested and this issue happens in Edge, Chrome, and Firefox. Others have experienced this problem, too, on different computers. The problem also happens irregularly: it will occasionally work as expected, but then pause the next 10 times and never play normally again. I'm stuck and would appreciate any help. I can't share the file publically due to copyright issues but can s

That subject link says it all. Do you USE THEM or NOT? I tried a few and each time it caused weird and strange things to happen, nothing that had anything to do with a slide's transition. Could this be a leftover of SWF? And that's why they aren't working as advertised when you Preview in HTML5 Browser? Thanks! 

So I have a course that is made up of 5 modules (multi-sco course that is packaged using the Multi-SCORM Packager). Each module has a quiz of 5 questions that is completely independent of the other modules. The user is able to complete any module in any order. After completing all 5 modules, I would like to have some slides describing to the user their next steps. How do I go about doing this?  My first thought was to have a conditional statement such that if quiz is complete for each module, show slides. Do variables pass from one module to another? Is this a viable solution or is there an easier built-in solution?

I have 90 bookmarks on a video and I'd like to duplicate that slide the video resides on. Then, I'd like to replace that duplicate slide with another video, preserving the bookmarks. The second version video is very similar to the first, so that's why I thought this best. But, when I duplicate the slide, try to import another version of the video and keep the same bookmarks throughout, the original then is changed as well. I cannot seem to find a way to have 2 versions of the same bookmarks in two different videos. I do not think I can copy bookmarks from one video to another. Any ideas? Suggestions? Greatly appreciated. 

Captivate 9 with all updates.Strange finding here. I have a custom nav bar I made. Three buttons with a gray background which is an SVG. The gray background is the object causing a problem. The background does a quick, what appears to be, fade in on each slide. There is no fade on this object. There is no effect turned or applied on this object. However, the gray bg svg object does display an inactive "Effect Duration" for .1 seconds. This is the only thing I can think of that is causing the problem. Since it is inactive, I cannot change it to '0'.Any advice?

We have completed a fairly straightfoward e-learning module, but having real problems with how it interacts in the World Manager LMS system.Is there anyone who has succesfully been uploading Scorm Files to the system.Not sure if it is our settings or a platform setting. Any feedback will be welcome Warm Regards,Shona

Hi.. when i try to publish my course in captivate it is didn't published..it will stop at 63 percent and automatically closing the captivate.. what is the issue please tell me Thank you

I've played with a Text Entry Box and HTML5 Output to Browser with [ ] Retain text checked, and then with it unchecked. I can't see the difference. The only thing I can find in helpx.adobe.com is https://helpx.adobe.com/captivate/using/text-entry-boxes.html , and it only says to check it. Nothing about its purpose.  Thanks yous

The positiong and placement of a non-interactive object is supposed to be in the Transform section of Properties. https://helpx.adobe.com/captivate/using/library-objects.html Soooo... why dont i have it? no transform section Thanks!Alison

Hello, all. I'm a new Adobe Captivate user and I'm having problems previewing a quiz project. I'm getting the following error: Hmmm… can't reach this pagehtml5temp14232374726875pre’s server IP address could not be found.Search the web for html5temp14232374726875preERR_NAME_NOT_RESOLVED. I don't have a clue interpreting the error. Any help is much appreciated.

Hello,i use captivate 2019 subscription and i like to know, whether there good german voices available? If not, is there a way to implement microsoft cognitive services (Speech Studio) in captivate? Best regardsRené Hartnick

When I test for devices with thinner widths, I don't know why these small images refuse to group in clusters of four (in the red and orange areas). I've tried just about everything.