Questions

After updating today to 13.3 I keep getting the error below when trying to create virtual copies. """  ?:0: attempt to index a nil value ''''' Any idea what is going on?  Also when I updated I had to update my catalog.  Since then I have done a bunch of adding photos and editing.  If I try and revert to the previous version of LRC, will it recognize the catalog?  

Running LRC 13.3 (Camera Raw 16.3) on an M1 Mac. Mousing over an image in Develop mode shows the magnifying glass and I'm unable to access edit-in plugins. Restarts of no help. 

Hi there,I recently posted however unfortunately was not able to resolve the problem. I am having difficulty locating some files in LRC. I believe it is due to the file location changing (long story everything on computer was wiped) I have files backed up to my external hardrive. I have shown LRC the new file location (external hard drive) when prompted to locate the files. It then goes into compolete meltdown and deletes all images in my catalogue. I have two videos showing the problem hopefully they will help. Please see the youtube link here - https://youtu.be/Zooj8s8nFw0https://youtu.be/uksvk6FGenI If anyone could please help me it would be greatly appreciated.

When I installed Lightroom Classic to a new computer many photos have black bands across them.  Photos are stored on Lacie.  They are ok in Lightroom.  Any thoughts on how to resolve problem?  If I uninstall and reinstall will my edits be saved?

Hi When using some of sliders in Lightroom Classic (e.g. temperature), the changes to the image are significantly delayed. But they are instant when I'm using keyboard. This looks like a kind of bug, because I see GPU load while the image is not changing. When using keyboard, there is similar load on GPU, but changes are instant. Is this a known issue? Is there a fix or workaround? I recorded screen to make it easier to understand: https://www.youtube.com/watch?v=90lQDo-eksk Video demonstrates this on 24Mpix file, Win11, LrC 13.3, HW: i7-12700F, 32GB, NVidia 3060 12GB.

Issue:Since upgrade to Lightroom Classic 13.0, and later to 13.0.1 LR crashes often when workin in library module or in development. Steps to reproduce:It often happens, when I am changeing back from a single image view to grid mode, but very often it just crashes during other actions in library or development module. Usually I can work 2 to max 30 minutes, before LR crashes. Sometimes, it just crashes, although I did no action. I am working with a catalogue with about 100000 photos, but I tested it with a smaller catalogue. It also crashed. Expected result:run stable for hours. My system information:Lightroom Classic-Version: 13.0.1 [ 202310121438-d2af310c ]Lizenz: Creative CloudSpracheinstellung: deBetriebssystem: Windows 11 - Business EditionVersion: 11.0.22621Anwendungsarchitektur: x64Systemarchitektur: x64Anzahl logischer Prozessoren: 32Prozessorgeschwindigkeit: 2,9GHzSQLite-Version: 3.36.0CPU-Auslastung: 0,0%Integrierter Speicher: 130779,8 MBDedizierter GPU-Sp

I need to re-create my Lightroom catalog as I suspect the existing catalog is corrupt as it cannot be backed up. I've hired consultants to help but only result now is I've created a new empty catalog and found that indeed it can be backed up. So now for the second step. bringing in the existing library of photos so that it shows up nice and organized as it did in the old catalog. I've tried importing twice now and wind up with a mess both times. Where can I find straightforward help to accomplish this? TIA,Ken

GM,I updated to  version 13.3 but I am unable to find the new Adaptive portrait feautre that I was told about. Was there something additional i need to do  to  implement that ?THX

On a Mac, after installing all of my presets, and changing the names of the presets within LR, how can I do a backup of everything so I can transfer my presets to another Mac so they install and display in the exact same way on the other computer? I found info online how to backup the folder containing the presets, though what about the names that I changed within LR for the presets? Thanks in advance

Bonjourdepuis quelques mois , dans LRC apres importation photos dans le module developpement , sous l icone masquage , apparait un point rouge alors que je n ai encore fait aucun post traitement ni masquagecomment résoudre ce problememerciEG 

After upgrade to Lightroom 13.3 a zoom in/out on photo in a gallery sets the photo for Republisch. Windows 11,  Lightroom 13.3 Issues is repetable.   Solution is to rebuild 1:1 pre-view and then run "jf-bag-o-goodies" plugin to set photos for "Mark selected publish Collections As Up to Date.   But preview in Lightroom should not promote an update of the photo for republishing.

Bonjour,je choisie dans Adobe Font la police LUSH régular, j'utilise celle ci dans L.R classique avec abonnement, et avec la dernière version pour ma signature et pour la plaque d'identité. Une fois sur deux la police n'est pas reconnue et je me retrouve avec la police de base. Je précise que si je vais dans la description, c'est bien la police LUSH qui est censée être utilisée  ?? donc nécessité de réécrire le texte ou de relancer 2 à 3 fois L.R pour qu'enfin il accepte d'utiliser la bonne police.Ceci n'arrive qu'avec la dernière version de L.R, un bug  Merci pour votre avis  Cordialement félix

On 2 different destop computers (Windows 11 and 10) , LR 13.2 has been crashing several times at the beginning of printing, although it does not happen every time. Printer is Epson P900.A dump report was created  and sent to Adobe (maybe Adobe France as I am located there ?).Did you receive these reports and found a solution ?Thanks,Bernard 

Depuis plusieurs jours (semaines - je ne me rends plus bien compte), Lightroom Classic plante de manière innatendue, sans réelle relation avec une quelconque surcharge de traitement...Je n'ai jamais connu cette situation auparavant, parfois des lenteurs lorsque je poussais un peu les choses, mais depuis un moment, Lightroom plante littéralement sans aucun avertissement ni message d'erreur. Et lorsque je relance, aucun message particulier non plus.Je précise que les applis Adobe sont constamment à jour...Rencontrez-vous ce type de problème également ? Windows 10AMD Ryzen 5 3600 6-Core Processor 3.95 GHz32,0 Go RAMNVIDIA Quadro P400Version 13.3 de LrC

Hi, after installing version 13.3 I am having a problem with the font sizes on the secondary monitor.  I am using a surface pro 8 and have the font size in the preferences -interface scale set to large 200%.  I often use lightroom on an LG 50 inch TV to review photos with my family.  I recently upgraded to 13.3, and suddenly on my TV the interface and fonts were huge, barely could see 1 picture in the grid, I tried to adjust the interface size but couldn't even get to the bottom of the interface menu to hit OK.  Went back to displaying on surface, reset the font to medium,  and most of the fonts were fixed except for right clicking menus and the top menu bar with file etc.  Program is useable but less than ideal with this setting.  Also any menus with checkboxes (likely the copy settings menu in the develop module) are cropped where only the botton 3/4 of the words display).  when I go back to my surface, I have to reset the font preferences back

Hi! I updated my lightroom and woah, its been terrible. First, my editing slowed waaaaaay down. every single tool I used, the screen would freeze, the little pin wheel popped up and started spinning. my workflow pretty much destroyed. I deleted LR, and reinstalled it. did all the things, finally called support. They took over the controls of my computer and we came to conclude that the catalog was "no good" so I started a new one. I just imported my photos from tonight and guess what, same issues. The tools are incredibly slow and not responsive, not to mention the masks are really messed up. When I click select subject, it selects everything, its not detecing the subject, sky or background! I don't really know what to do here, anyone else having issues with the newest LR update ???  The attached photos are "select subject" clearly the entire photo is chosen. When I compare it to select background, the opacity is slightly more than when I select subject, but either way the en

I created a Background mask and dragged the exposure down by 1.68 stops. It leaves a strange halo around the hair. Photo 1 - before maskPhoto 2 - after creating Background mask and dragging exposure downThis bug also affects existing files, so many files I've worked on previously can no longer be edited or exported. 

When I hit ctrl-e I get a different photo that I had not selected opended in PS, does not matter if I do this in the folder or the colleciton. Actually every photo I try to export ends up beeing the same wrong photo from the same folder. Restarting LRC helped, no I get the photo I selected. Can we have the previous version back while you continue beta testing 13.3?

I like to use my left/right arrows for next/previous photo and only for that purpose. With the lastest update, I've noticed that if my mouse happens to be hovering over an adjustment slider though, it moves the slider instead of advancing to next photo.  So I have to move the mouse out of the adjustment pannel to get the arrow button to advance the next photo.  Any ideas on how to fix that? 

Hello this is my first time posting, and have been having this issue for many months and now I have pulled out enough hair that I need help in resolving this software freezing and slowing way down where I can't do anything either in lightroom or out of lightroom.    Recently I have had to log out of lightroom and log back in to get it to work again. I have had a heavy flow of images (thousands that have been imported) that has seemed to be some part of the issue with the software running slow or freezing. I have even had to restart my computer several time.    I have asked my husband, who is more computer savy that I am (by miles) and he says that I have all the recommended system requirements to run the software. We check the task manager to see if anything is being bottlenecked during a time when the program decides to freeze or become extrememly delayed in the speed of the action its doing.   I honestly don't know what to look for and I am do not know how to

I no longer can sort images manually in LR.. I know I've had this problem with a previous version and I was able to deal with it by resetting presets/rebooting etc. but this doesn't seem to help now.  This is a real pain. There are prior posts from earlier versions reporting issues with custom order. Seems like the bug regressed back into LR> https://community.adobe.com/t5/lightroom-classic-discussions/custom-order-of-photos-in-folders-has-been-corrupted/m-p/11327167#M195701

Same action in Curve panel, but the UI shows different between PS and LRC. Is this a bug in LR? Thanks.  

I have updated to the recent release, and since then there has been nothing but errors. It gets stuck converting to DNG, The progress bar doesn't show what it's doing. When moving photos to different folders, it just doesn't work. Adobe, this is HORRIBLE. Basically I can't work with this.. fix it urgently or let us go back to how it was. The problem is tha the library has been updated so even if i reinstall a copy i will lose anything I have done. Please don't be so quick updating the program without testing EVERYTHING, the new clone tool is not worth all these mistakes.

I have LRC 13.2  running on Windows 11. My Samyang 14mm f2.8 lens is not recognized by LR, rather regular lens appears in the panel. No lens identity is displayed in the Library  metadata panel. What can I do to have LR recognize this lens?

Nach dem letzten Update auf LrC 13.3, hängt sich Lightroom bei anwenden Objektunschärfe auf und es blendet sich diese Fehlermeldung ein...Laut Adobe Support ist dieser Fehler noch nicht bekannt.Win 10, aktuelles UpdateCreative Cloud Desktop, LrC 13.3