Questions

Buenas noches. A ver si alguien me puede ayudar. Intento instalar un perfil de color .ICC en lightroom classic y cuando le doy a importar , por defecto sale una ruta de carpetas erronea, pongo manualmente la ruta correcta y me sale la carpeta vacia.Sin embargo cuando fuera de lightroom voy a la ruta correcta de c:\windows\system32\spool.... etc, ahí aparecen todos los perfiles correctamente. Alguien sabe como puedo solucionarlo?Gracias.

My RAID array takes a little time to settle down and announce itself to MacOS. When LRc restarts Automatically at reboot, my RAID array restarts, but it is not available. If LRc is automatically restarted, upon restart it takes note. Later on, long after the array has announced and is properly mounted, LRc cannot open any files on it. I must shut LRc down and restart it. REQUIRED FIX: When I click on a directory in LRc, it needs to refresh its content cache. That will surely burn a millisond or two, but that's considerably less time than a quit+ restart LRc sequence. To test (I'm guessing here): 1. Install a USB file system that takes a while to stabilize (e.g. a RAID array)2. use LRc to access some of the files on the array3. rig the system so both the FS and LRc will be started at reboot4. reboot the system5. wait for the slow FS to be fully mounted and accessible6. try to access the files you accessed earlier using LRcIt should be possible to see the file(s) via

Sometimes photos are not synched. But which and why? Here are round about 700 phtotosto synch and the synch is stopped at any time. No errors, no infos why.

Lightroom Classic won't backup catalog on Dell 8960 desktop. It gets to "Copying Catalog" and stalls.  If I click on Cancel it tells me it's cancelling but doesn;t.  The only way out is Task Manager "End Task"

#CopySettings#Settings I use "copy settings" for an image and paste them to another. But then, when I want to process an indivisual image and try to mask it (ANY mask - sky, subject, etc.), it creates a mask from the previous "copy settings". Even though I do NOT have "masking" checked in the copy dialogue.I've not found a way to get rid of that "memory" other than to exit LR. I've gone back to the source image, deleted all the masks, copy/pasted those settings, and it still introduces the ghost settings. This behavior also happens with the noise reduction function.

Hello everyone, I'm experiencing an issue with Lightroom Classic that I hope someone can help me with. After launching the application, it closes unexpectedly. I've already tried installing different versions of Lightroom Classic, but the problem persists.   I've attached a screenshot of my computer specifications, and everything seems to be more than capable of running Lightroom Classic smoothly.   If anyone has encountered a similar issue or has suggestions for troubleshooting, I would greatly appreciate your assistance!   Thank you in advance for your help!     {Moved from Lightroom Cloud to Lightroom Classic Forum by Moderator} 

This shouldn't be this hard. I used to know how to find which version of LrC is installed.  But I can't find that information anywhere. Any suggestions?TY Windows 11LrC 14.5.1 

Hello, I am experiencing an issue where Lightroom Classic version 15.0.1 cannot utilize all graphics processor options ("Use GPU for display", "Use GPU for image processing", "Use GPU for Export") concurrently. When one option is selected, the others become grayed out (mutually exclusive), preventing full GPU acceleration despite the GPU being recognized in the system info.My system information is as follows:System Configuration:Lightroom Classic Version: 15.0.1 [ 202511041508-dddee541 ]Operating System: Windows 11 - Business Edition (Version: 11.0.26200)Graphics Processor: NVIDIA GeForce RTX 5080Driver Version: 32.0.15.9144Installed Memory (VRAM): 15.5 GBCPU: 3.6GHz (24 cores)Built-in memory: 64 GB RAMObserved Behavior in Preferences > Performance:When "Use GPU for Export" is checked, "Use GPU for display" and "Use GPU for image processing" are disabled (grayed out). This forced exclusivity prevents "Full graphics acceleration" from working as exp

I currently have 100s of folders of photos from different shoots that were initially on my internal drive but then moved to my multiple external drives, and I had to update the location in Lightroom every time I wanted access to one of them. Well now I may for the sake of better organization, buy one big external drive to put all of those folders in but I realized that's going to re break the locations in Lightroom and I'll have to do that for all of them again. Is there any way around this? The one thing I have going for me is for example my H: has a folder Pictures, then under that say 2015, 2016, 2017 etc until that drive is done. I: has Pictures then under that is 2018, 2019 etc. you got the idea. So if on this new big one I use the same structure of Pictures and under it is every year, could I just locate the Pictures folder to fix ALL of them at once? And if I do that will Lightroom crawl to a halt trying to process reconnecting 10s of 1000s of photos? Am I overthinking that

I just upgraded from Lightroom 6.10 to Lightroom Classic 15.0.1 and my main catalog did not upgrade correctly. I'm getting the error " Lightroom encountered problems trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom. I'm running an older i7 4770 PC 16GB RAM with Windows 10 22H2 which I believe meets the system requirements from Adobe.  I've tried to upgrade my current catalog without success and also created a new catalog and tried to import from my current catalogue but that also failed. My catalog is 5GB tied to 7,000 photos and stored on a second internal HD which is separate from my boot OS drive where LR installed.  I did successfully update an older small Lightroom 4 catalog so I'm thinking there are issues with my larger catalog. The catalog has been optimized, and as far as I know, there are no corruption issues.   Any suggestions to help get my main catalog u

Even after updating Lightroom Classic to 15.0.1, running on Windows 11, I still cannot read many of my video files (testing with AVI and MP4). In a previous version (probably a few months ago), I had no problems with these files. All other video programs I have tried can display these files without problem. E.g., Premiere Pro 2025, After Effects 2025, (Windows) Media Player, VLC media player, all have no difiiculty reading any of the video files.  Are others encountering these problems? If not, how do I troubleshoot this?

Ich möchte für eine Diashow zu einem Ordner mit Fotos zusätzlich Handybilder und Screenshots plazieren. Beim speichern verändert Lightroom allerdings wieder die Reihenfolge... Was muss ich tun, damit die eingefügten Bilder an Ort und Stelle bleiben?

How long will it take for DJI and Lightroom to create a camera profile for the DJI Mavic 4 Pro? 

Please move to Discussions.Link to post: (Picture Preview in Development mode too small) by ilehonig https://community.adobe.com/t5/lightroom-classic-bugs/picture-preview-in-development-mode-too-small/idi-p/15622815 Hello Community! I am on Lightroom Classic 15.0.1 on windows. In development mode, the current picture is displayed only super small. I can not find a way to make it bigger. Already tried to re-install LR with no luck. Any Idea? This message has 1 replies

Hello Community!I am on Lightroom Classic 15.0.1 on windows.In development mode, the current picture is displayed only super small. I can not find a way to make it bigger. Already tried to re-install LR with no luck.Any Idea?

I have been having this issue for a while now, as I batch edit, when I go to copy and paste my edits to my other culled photos, it takes hours to do so, making it almost unusable as this is just a ridiculous amount of time. I edit off of a sandisk 2T hard drive with my catalog being stored on there as well. I have the most up to date lightroom classic version and have already upgraded my catalog as well, everything has been up to date. I have two computers I have tried with the same issue, one being 2023 Macbook pro m2 chip and the other being the mac mini (I can't remember the exact year at this moment but it's somewhere around 2021 ish). I went in and changed some preference settings as well with no help; camera raw cache size 10 gig or more, smart previews instead of originals, generate previews in parallel off, use graphic processor off, and replace embedded previews by standard previews during idle time on as I have seen this in other articles here on Adobes page. I really have no

J'ai installé LRc sur 2 ordinateurs, un MacBook Air (LRc 15.0.1 et Sonoma 14.7) et tout récemment sur un Mac Studio M1 Max avec Tahoe 26.1. Je viens de découvrir que lors du téléchargement de LRc sur ce dernier, c'est la version 12.5.2 qui s'est installée et non la dernière. Dans Creative Cloud, onglet Application, on me propose d'installer LRc comme s'il n'était pas présent sur l'ordinateur et on ne me propose pas de mise à jour.Quelqu'un a t'il un avis?

For years i have been printing to my large format HP z9+ from Lightroom Classic with ease. I recently purchased a Mac Studio and upgraded to latest mac ios. Attempting to print today i experienced a brand new issue: using a custom .icc profile for printer and paper as i always do i click on "Print Settings" button to access the Lightroom print dialog menu however Lightroom opens the generic mac print menu instead.   Needless to say printing from this mac menu results in horrible, useless prints. I'm stumped as to how to get Lightroom to present its menu again. any hints?  Thanks  Ken Mendocino, CA

Using Denoise doesn't make any difference to my photo.I enlarge the photo and see no difference before and after.I have upgraded to 15.0..1 I am using a brand new Imac with M4 chip so the graphics card is brand new so this cannot be the issue that I have seen mentioned.I only use RAW images.I have to tick RAW Details before even the Denoise tick button will scan. Is this correct?

Hello, I have problems with my LRC catalog.(Windows 11) I got the message(!) that my submaps are missing and I have to link them. Can you advise me about this problem?

Bonjour,Depuis quelques temps, une fenêtre d'avertissement (voir capture d'écran jointe) apparaît à l'ouverture de Lightroom Classique version 15.0.1 sous windows 11. Je ne comprend pas pourquoi. Je clique à coté, la fenêtre disparait et je peux utiliser mon catalogue. Est-ce que quelqu'un peut me dire comment faire disparaitre cette fenêtre à l'ouverture et pourquoi elle apparait ?Merci d'avance.Fabrizio Hello,For some time now, a warning window (see attached screenshot) has been appearing when I open Lightroom Classique version 15.0.1 under windows 11. I don't understand why. I click next to it, the window disappears and I can use my catalogue. Can anyone tell me how to make this window disappear when I open the programme and why it appears?Thank you in advance.FabrizioCapture d'écran 2025-12-05 132508.pngCapture d’écran 2025-12-05 132531.jpg

LrC 15.0.1 M4-MBAir-32GB MacOS 26.1Splitted Imported photos into folders by events.Expected: each folder displays count of photosReal act: count of photos displayed '-1' this 2025-12-06.3 folder contains 436 photos.and filmstrip below is displayed as '436 Photos' スクリーンショット 2025-12-07 15.42.36.pngafter selecting another folder, still display '-1' until LrC relaunch.

Fun with the Catalog.  In my Catalog I have Folders ... too many of them ... with their assigned dates. Some (a lot) of these have a question mark, a year/month/date, and any number (0-150+) of images.  Some of these folders display images, others, a gray box. A message displays "Folder is missing please re-link" I save my finished pictures to an external hard drive. Can I assume it is safe to delete those folders that don't display an/any images   TY   Windows 11 LrC 14.5.1  

Since about two months when I am trying to print a photo on my Epson-XP15000 using the printing module in Lightroom, the dimensions and the paper size are all wrong. I never had this before... Does anybody know what is happening and how I could repair this?

This is an ongoing problem that I have but it seems to have got much worse with the latest LrC update.I am sorting through thousands of photos currently and culling duplicates, for this I need to drag and drop potential images around within the Library module.  I am not moving them to another folder or collection.I've tried all the troubleshooting steps, several times.  Still after a very short time of doing this, I have to restart Lr and all is well again for about 20-30 minutes, rinse and repeat.  It drives you insane after a few hours.