Questions

The locking of the thread where you first announced this UI change months ago leaves me no choice but to make a new post for it entirely. I don't know how, after an entire thread of people saying that they dislike the change save for maybe two or three outliers, you can still insist on maintaining this rounded corner aesthetic in software that is used by thousands for the purpose of cutting and editing PRECISELY. The argument of it being better 'because of psychology' is so bogus, and despite the renouncing of it from your users, your only reply on the subject consisted of 'i didn't like it either, but i got used to it, and now the old version looks old', completely sidestepping the point that people were trying to make. If we can't see sharp edges where its implied that clips are connecting without a gap, then ADDING a gap via rounding will create the illusion or ambiguity that there may be an unintended gap. Sharp edges also mean that aligning footage vertically on multiple trac

 Hi all, I have over 30 iPhone videos I am turning into one video. I'm all ready to go but when I export the final video it's washed out. When I go to the export tab I'm getting the error you see below. I looked at some previous posts from 2022-prior but I'm having a hard time figuring out how I can fix this before editing. Like, do I need to do something to each individual video, or do I have to use Media Encoder or can I make one change that will fix all of the individual videos? Thank you for any help. I'm on Premiere Pro beta. 

I like to drop an idea to improve optical flow for framerate upsampling.I do work a lot super8 filmscans with are 18 fps.When I drop these in a 25fps sequence and enable optical flow I get great smooth results!Optical flow however doesnot work wel with scene changes, you get wierd frames there.Can optical flow be enhanced with scene detection prior the optical flow render?(This also applies when you export with Optical flow enabled) I also tried this with rapid droneshots with fast vertical movement which where shot in 25fps.If you upsample them with optical flow to 50fps you get a smooth result. Other stuff I tried was using a 4K camera like Sony AX53 with can only do 25fps.If you walk around while shooting with this camera you get a bit restless feeling when viewing the result.converting to 50fps looks much better.

Hello everyone.I recently had a question In this Discussion Forum.https://community.adobe.com/t5/audition-discussions/premiere-pro-and-audition-dynamic-link-opens-in-premiere-beta/m-p/15099455#M41153Basically When working with Premiere Pro and Audition, If Premiere Pro Beta, is uninstalled, It's working fine. But, If Premiere Beta is also Installed, The Dynamic Round-Trip back and forth from Audition Into Premiere Pro opens In Premiere Bata. Also, I noticed Premiere Beta Freeze, and I see a Black screen for 10-15 Seconds with few Beep Sounds. I have Uninstalled and Reinstalled Premiere Beta, but I can not figure out the IssueThanks.

Premiere Pro Beta 25.2.0 (Build 91)MacOS Sequoia 15.2I tried to import .braw footage, received the notice from Premiere to download the plugin. After install, I'm still receving the same notice.

Hi! I'm trying to extend footage in Beta but it's giving me an error message: "Generative Extend doesn't support the resolution, color space, audio channel format of this clip." I'm editing .mxf footage.Thanks,Elettra

I know the number has always been there. Now I can't find it. I rely on knowing what build is available, especially when I am avoiding a known bug.   @mattchristensen    Stan    

Morning - we have been Canon Raw users for 8 years so this has Beta us VERY excited. We are in the middle of a produciton with about 5TB of assets, mainly Canon c200 4k 60P raw and Canon c500 mk 2 24p 6k raw ( alsobunch of droneand Iphone clips)....it runs fine on our M2's - so we opened it in the latest beta 25.2.0 and it was pretty unsuable. The re draw rate for thumbnails was killer slow, We oculd not playdown yellow clips, NEST's were greyed out completly and Keyframes were only in the Effects and not Properties panel....It's all good - but as this was unworkable - we just went back. BUT...if there was any way to bring previous release WORKSPACES  AND KEYBAORD SHORTCUTS forward that would be great - i saw somewhere to do this - IF I read it correclty - but nothing happened  - having four monitors on all our edit systmes makes htis a pretty laborious task and Does inhibit us from easily moving to betas'   - Thanks! 

Hello,I'm currently using Premiere Pro Beta 25.2.0. I've been trying to edit the audio of a clip using Dynamic Link to Audition, but the option is inactive. When I switch to the regular version of Premiere Pro (not the Beta version), I can link without any problems. Would someone be able to help me with this issue? I'm using a Macbook Pro M1 Max.

I'm trying to save a track style in Premiere Pro (BETA) V 25.1.0 on Mac. The "Essential Graphics" panel has been replaced with the "Properties" panel and now I can't find how to save track styles for caption formats. Any idea on how to do this? Thanks!

Can't find Premiere Pro (Beta). I checked everythind, scroll to the bottom, but still can't see it.I'm using an education adobe account. Using Windows 10 (but on my macos, still can't find).CC version is 10. 6.4.0.361.Btw, I'm trying to download it for extension development, because I saw UXP tools only work for beta version. Is there any other way that I can develop extension for Premiere pro?

Once, I install the app this message pops up "Initialization Failure, Bad INDEX offset array"

Hello Team,I tried the Beta 25.1 build 63 and it fixed major BSOD issues on my windows PC. So far so good!However, it updated to a latest beta (build 63+) and dragging files from the Media Browser doesn't work anymore. Dragging from the project tab still works. I reverted back to build 63 which is pretty stable! Cheers,Robert.

The bottom of the Keyboard Shortcut panel is cropped when the screen resolution is set to 1352x878 MacBook Pro 14inch M1Sonoma 14.6.1Premiere 25.2.0 (76)  

transcribing doesn't transfer to duplicate sequence.The bug occured when I:1. Hit transcribe on 40minute talking head sequence.2. While transcribing, I duplicated the original sequence   renamed the new sequence   and closed the original.  3. Wait for processing to complete. (clip processing still occures while the sequence is closed.)4. In new sequence, open text tab, transcript, nothing there. (the originial has one)5. Open original again6. Go back to new sequence,7. And now the transcript apears  The transcript should have apeared the first time i opened the transcript in the new sequenceInstead I had to find the work around of opening the origianl and going back to the duplicate. Small issue but I want to help improve the product.   

Can we get an edit post feature for logged in members so they can edit their posts to the community?

Hello  Premiere Pro Beta Developers and Project Managers,I have just started using the new multitrack captioning and caption track styling available in Premiere Pro (Beta) 25.20 BETA (Build 74)I gota say I love what you have done!It is meeting my current expectations, and request. I do have a suggestion for the suggestion box though.What would be an awesome addition to this feature is a better Style management system incorporated into the Style Browser.Maybe we could add it to the right click context menu when right click on a saved preset style?It would be grreat if we could import, rename, duplicate (create a new style from an existing style preset) and delete styles; as well as, the current "Set as track style" and "Apply style without font" options that currently exist.It would also be good if you could select one or more styles to export for shared projects. Just my two cents.  Keep up the great work!

Trying to find this panel Or is this supposed to be Ae only?  

Feature request (is this the proper forum for this?) Make "Preview Area" a project setting, or at least project 'sticky'. Even a toggle button would be quicker than a context menu. I always use Preview Area in source bins, expecially on long format (to view usage). It is cumbersome to have to turn it on for each bin opened. Current workaround is to create a custom metadata display that uses 'usage' columns. As always, thanks for continuous improvememt!

Hi folks, Happy New Year!In Premiere Pro 2025 Beta, I'm trying to export HLG footage using Hardware encoding but get the error message - "Your system's hardware does not support hardware acceleration for the current settings".I'm using the RTX 4070, and have hardware acceleration ticked in preferences for encoding and decoding.The original footage is HLG, and I'm working in Have attached my settings, just can't figure out the issue.Have attached settings pics.My first time using this community, I usually trawl through Google, trying to find info that is actually up to date or not just plain wrong......... Maybe here is the future?  

"Set Focus on the Timeline..." toggle in timeline panel. I often jump back and forth when switching from logging/cutting selects from a source into the timeline (thereby needing to keep the source monitor focused), and cutting those selects into my working sequence (thereby needing to keep the timeline focused). While it's an easy change to hop into settings, it is 4 clicks instead of one. Including it in the wrench menu would cut that in half, but having a button would cut it to a single click. Enjoying the new features - keep it coming! Cheers,Dan

I find that different builds can sometimes create a slowdown in reframing jpgs or PNGs imported into Premiere.  How about creating a proxy workflow just for stills?   

So, as the title says, Premiere Pro beta won't open.It only opens up the 'loader', but immediatelly stops right when it tries to load After Effects dependencies. Problem is it generates no log because the software doesn't launch, so I have no idea even how to give details in that regard. Same thing happens with Media Encoder. With After Effects, opening it up gives me an error at least, but has been 5 days since a post regarding this problem (which I commented to) has been posted and no answer has been given. I really want to fix this as I need the Color Management in beta.  I will leave the error messages from launching After Effects for illustration purposes - out of the three apps is the only one giving me something, though as you will se it doesn't make much sense.  Also, FYI, I tried to do a bunch of stuff - uninstalling and reinstalling, uninstalling --> logging out of CC, logging back in --> reinstalling, uninstalling --> deleting pref

I'm playing around with the new Premiere Beta and Im having an issue when I make an in to out on my source monitor audio. It's not highlighting my selection like it did in previous versions. Ive tried looking at different options but Im not seeing anything. Any ideas?

stuck on Version 25.2 for weeks.  any suggestions?